Gas breakthrough experiments on pelitic rocks:: comparative study with N2, CO2 and CH4

The capillary-sealing efficiency of intermediate- to low-permeable sedimentary rocks has been investigated by N-2, CO2 and CH4 breakthrough experiments on initially fully water-saturated rocks of different lithological compositions. Differential gas pressures up to 20 MPa were imposed across samples of 10-20 mm thickness, and the decline of the differential pressures was monitored over time. Absolute (single-phase) permeability coefficients (k(abs)), determined by steady-state fluid flow tests, ranged between 10(-22) and 10(-15) m(2). Maximum effective permeabilities to the gas phase k(eff)(max), measured after gas breakthrough at maximum gas saturation, extended from 10(-26) to 10(-18) m(2). Because of re-imbibition of water into the interconnected gas-conducting pore system, the effective permeability to the gas phase decreases with decreasing differential (capillary) pressure. At the end of the breakthrough experiments, a residual pressure difference persists, indicating the shut-off of the gas-conducting pore system. These pressures, referred to as the 'minimum capillary displacement pressures' (P-d), ranged from 0.1 up to 6.7 MPa. Correlations were established between (i) absolute and effective permeability coefficients and 00 effective or absolute permeability and capillary displacement pressure. Results indicate systematic differences in gas breakthrough behaviour of N-2, CO2 and CH4, reflecting differences in wettability and interfacial tension. Additionally, a simple dynamic model for gas leakage through a capillary seal is presented, taking into account the variation of effective permeability as a function of buoyancy pressure exerted by a gas column underneath the seal.