Formability analysis of dissimilar tailor welded blanks welded with different tool pin profiles

被引：17
|
作者：
Nadikudi, Bhanodaya Kiran Babu [1 ]
Davidson, M. J. [1 ]
Akasapu, Neelakanteswara Rao [1 ]
Govindaraju, M. [2 ]
机构：
[1] Natl Inst Technol, Dept Mech Engn, Warangal 506004, Andhra Pradesh, India
[2] Nonferrous Mat Technol Dev Ctr NFTDC, Hyderabad 500058, Andhra Pradesh, India
来源：
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA | 2015年 / 25卷 / 06期
关键词：
aluminium alloys; tool pin profile; tensile testing; formability; microstructure; MECHANICAL-PROPERTIES; ALUMINUM-ALLOY; FRICTION;
D O I：
10.1016/S1003-6326(15)63784-0
中图分类号：
TF [冶金工业];
学科分类号：
0806 ;
摘要：
An attempt has been made to study the tailor welded blanks (TWBs) made by friction stir welding (FSW) with five different tool pin profiles. The formability of welded blanks was evaluated at constant FSW process parameters. It has been found that the welded blanks with square pin profile tool produced better formability properties as compared to other tool pin profiles. It was found that the pulsating action of the square pin profile is said to be the reason for this improvement. A microstructural evaluation performed on the blanks revealed that the stir zone created by taper cylindrical and stepped cylindrical tools was less homogeneous than that of the square tool, resulting in less formability. The limiting dome height (LDH) of square pin profile tool was found to be 14 mm while those of taper cylindrical and stepped cylindrical tools are 12.5 mm and 12.4 mm, respectively.
引用
收藏
页码：1787 / 1793
页数：7
相关论文
共 50 条
  • [31] Effect of medium-speed forming on formability of tailor welded blanks
    Amini, Ahmad
    Nia, Ali Alavi
    MATERIALS TODAY COMMUNICATIONS, 2023, 35
  • [32] Influences of thickness ratio of base sheets on formability of tailor welded blanks
    Song, Yanli
    Hua, Lin
    11TH INTERNATIONAL CONFERENCE ON TECHNOLOGY OF PLASTICITY, ICTP 2014, 2014, 81 : 730 - 735
  • [33] On formability of tailor laser welded blanks of DP/TRIP steel sheets
    Ahmed, E.
    Reisgen, U.
    Schleser, M.
    Mokrov, O.
    SCIENCE AND TECHNOLOGY OF WELDING AND JOINING, 2010, 15 (05) : 337 - 342
  • [34] Effect of differential heat treatment on the formability of aluminium tailor welded blanks
    Babu, N. Bhanodaya Kiran
    Davidson, M. J.
    Rao, A. Neelakanteswara
    Balasubramanian, K.
    Govindaraju, M.
    MATERIALS & DESIGN, 2014, 55 : 35 - 42
  • [35] Theoretical prediction and experimental investigation on formability of tailor-welded blanks
    Ma, Xiang-dong
    Guan, Ying-ping
    TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2016, 26 (01) : 228 - 236
  • [36] On formability of tailor laser welded blanks of DP/TRIP steel sheet
    Ahmed, E.
    Reisgen, U.
    Schleser, M.
    Mokrov, O.
    Materials Science and Technology, 2010, 26 (08) : 337 - 342
  • [37] FORMABILITY CAPABILITIES AND MECHANICAL PROPERTIES OF TITANIUM TAILOR-WELDED BLANKS
    Erdogan, Ozgur
    Sevinc, Sami
    Ertan, Rukiye
    MATERIALI IN TEHNOLOGIJE, 2024, 58 (03): : 421 - 427
  • [38] Formability improvement in aluminum tailor welded blanks via material combinations
    Bhagwan, AV
    Kridli, GT
    Friedman, PA
    TRANSACTIONS OF THE NORTH AMERICAN MANUFACTURING RESEARCH INSTITUTION OF SME, VOL XXXI, 2003, 2003, : 49 - 56
  • [39] Formability and weld zone analysis of tailor-welded blanks for various thickness ratios
    Chan, LC
    Chan, SM
    Cheng, CH
    Lee, TC
    JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY-TRANSACTIONS OF THE ASME, 2005, 127 (02): : 179 - 185
  • [40] Numerical and Experimental Analysis on the Formability of Tailor Welded Blanks based on Digital Image Correlation
    Li, Yanhua
    Lin, Jianping
    Guo, Ruiquan
    NUMISHEET 2014: THE 9TH INTERNATIONAL CONFERENCE AND WORKSHOP ON NUMERICAL SIMULATION OF 3D SHEET METAL FORMING PROCESSES: PART A BENCHMARK PROBLEMS AND RESULTS AND PART B GENERAL PAPERS, 2013, 1567 : 772 - 775
12345