Highly chemical ordered L11 CoPt (111) films with perpendicular anisotropy grown on glass substrates

被引:14
|
作者
Yang, Yang [1 ]
Chen, J. S. [1 ]
Chow, G. M. [1 ]
机构
[1] Natl Univ Singapore, Dept Mat Sci & Engn, Singapore 119260, Singapore
关键词
MAGNETIC-ANISOTROPY; DOMAIN-STRUCTURE; THIN-FILMS; MEDIA; ALLOY;
D O I
10.1063/1.3561115
中图分类号
O59 [应用物理学];
学科分类号
摘要
In this study, L1(1) CoPt (111) films were deposited on glass substrates at 300 degrees C with observed superlattice (111) and (333) peaks and easy axis distribution of 2 degrees. The magnetic anisotropy constant was in the order of 10(7) erg/cm(3). The effect of CoPt layer thickness on domain structure and magnetic properties was investigated. With increasing film thickness, the squareness was reduced and the nucleation field changed from negative to positive, indicating low impedance to domain wall motion and increased demagnetizing energy. Magnetic force microscopy images demonstrated the magnetic domain structure changed from irregular and large domains to highly interconnected stripes with increasing CoPt layer thickness. (C) 2011 American Institute of Physics. [doi: 10.1063/1.3561115]
引用
收藏
页数:3
相关论文
共 50 条
  • [31] L10-ordered MnAl thin films with high perpendicular magnetic anisotropy
    Oogane, Mikihiko
    Watanabe, Kenta
    Saruyama, Haruaki
    Hosoda, Masaki
    Shahnaz, Parvin
    Kurimoto, Yuta
    Kubota, Miho
    Ando, Yasuo
    JAPANESE JOURNAL OF APPLIED PHYSICS, 2017, 56 (08)
  • [32] Fabrication of L11 type Co-Pt ordered alloy films by sputter deposition
    Sato, H.
    Shimatsu, T.
    Okazaki, Y.
    Muraoka, H.
    Aoi, H.
    Okamoto, S.
    Kitakami, O.
    JOURNAL OF APPLIED PHYSICS, 2008, 103 (07)
  • [33] L10-Ordered MnAl Thin Films with High Perpendicular Magnetic Anisotropy Using TiN Underlayers on Si Substrates.
    Huang, E. Y.
    Kryder, M. H.
    2015 IEEE MAGNETICS CONFERENCE (INTERMAG), 2015,
  • [34] Improvement of magnetic properties of CoCuPt L11 thin film by Pt(111) underlayer on glass substrate
    Sun, An-Cheng
    Li, Long-Jie
    Huang, Chiuan-Fa
    SURFACE & COATINGS TECHNOLOGY, 2013, 231 : 157 - 160
  • [35] Preparation of CoPt-Alloy Thin Films With Perpendicular Magnetic Anisotropy on MgO(111), SrTiO3(111), and Al2O3(0001) Single-Crystal Substrates
    Suzuki, Daisuke
    Ohtake, Mitsuru
    Kirino, Fumiyoshi
    Futamoto, Masaaki
    IEEE TRANSACTIONS ON MAGNETICS, 2012, 48 (11) : 3195 - 3198
  • [36] Magneto-transport properties of perpendicular magnetization CoPt/VO2 bilayer films grown on glass substrate
    Qiu, Suiyu
    Harumoto, Takashi
    Nakamura, Yoshio
    Shi, Ji
    SURFACE & COATINGS TECHNOLOGY, 2022, 436
  • [37] Miscut-angle dependence of perpendicular magnetic anisotropy in thin epitaxial CoPt3 films grown on vicinal MgO
    Maranville, BB
    Shapiro, AL
    Hellman, F
    Schaadt, DM
    Yu, ET
    APPLIED PHYSICS LETTERS, 2002, 81 (03) : 517 - 519
  • [38] Fabrication of L11 -type (Co-Ni)-Pt ordered alloy films by sputter deposition
    Sato, H.
    Shimatsu, T.
    Kataoka, H.
    Aoi, H.
    Okamoto, S.
    Kitakami, O.
    Journal of Applied Physics, 2009, 105 (07):
  • [39] Fabrication of highly (111)-oriented Cu2O films on glass substrates by repeated chemical bath deposition
    Tonagi, Daichi
    Hagiwara, Manabu
    Fujihara, Shinobu
    JOURNAL OF CRYSTAL GROWTH, 2020, 551
  • [40] Formation of BiFeO3(110) films on ferromagnetic CoPt(111) electrode layer on glass substrates at reduced temperatures
    Chang, H. W.
    Yuan, F. T.
    Yu, Y. C.
    Tu, S. Y.
    Lin, P. C.
    Wang, C. R.
    Yang, A. B.
    Tu, C. S.
    Jen, S. U.
    JOURNAL OF APPLIED PHYSICS, 2015, 117 (17)