Investigation on rheological behavior of 8 mol% yttria stabilized zirconia (8YSZ) powder using Tiron

被引:10
|
作者
Moghadas, Shahab [1 ]
Maghsoudipour, Arnir [1 ]
Alizadeh, Masoud [1 ]
Ebadzadeh, Touradj [1 ]
机构
[1] Mat & Energy Res Ctr, Karaj, Iran
关键词
8YSZ; Tiron; Rheology; Zeta-potential; SUSPENSIONS; DISPERSANT; FILMS;
D O I
10.1016/j.ceramint.2011.01.020
中图分类号
TQ174 [陶瓷工业]; TB3 [工程材料学];
学科分类号
0805 ; 080502 ;
摘要
In this research, 8 mol% yttria stabilized zirconia (8YSZ) powder were dispersed in de-ionized water by the use of different amounts of Tiron as dispersant. The results of rheological and sedimentation measurements of each suspension were evaluated and the optimum amount of Tiron was selected (0.8% Tiron). Also, various pH were investigated and the best stabilized suspension is achieved at pH 10. Furthermore, the zeta potential of suspension with and without adding dispersant was obtained. The isoelectric point (IEP) of as-received 8YSZ powder was about 8.5 and shifted obviously to acidic region after adding dispersant to the suspension. (C) 2011 Published by Elsevier Ltd and Techna Group S.r.l.
引用
收藏
页码:2015 / 2019
页数:5
相关论文
共 50 条
  • [41] Liquid-phase redistribution during sintering of 8 mol% yttria-stabilized zirconia
    Jung, YS
    Lee, JH
    Lee, JH
    Kim, DY
    JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2003, 23 (03) : 499 - 503
  • [42] Compression creep characteristics of 8-mol%-yttria-stabilized cubic-zirconia
    Sudhir, B
    Chokshi, AH
    JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 2001, 84 (11) : 2625 - 2632
  • [43] Spark-plasma sintering the 8-mol% yttria-stabilized zirconia electrolyte
    Yang Bangchao
    Jian Jiawen
    Zhang Yican
    Journal of Materials Science, 2004, 39 : 6863 - 6865
  • [44] Mechanically alloyed Ni/8YSZ powder mixtures:: preparation, powder characterization and sintering behavior
    Wilkenhoener, R
    Vassen, R
    Buchkremer, HP
    Stöver, D
    JOURNAL OF MATERIALS SCIENCE, 1999, 34 (02) : 257 - 265
  • [45] Mechanically alloyed Ni/8YSZ powder mixtures: preparation, powder characterization and sintering behavior
    R. Wilkenhoener
    R. Vaßen
    H. P. Buchkremer
    D. Stöver
    Journal of Materials Science, 1999, 34 : 257 - 265
  • [46] Mechanically alloyed Ni/8YSZ powder mixtures: Preparation, powder characterization and sintering behavior
    Forschungszentrum Juelich GmbH, Juelich, Germany
    J Mater Sci, 2 (257-265):
  • [47] MECHANICAL ALLOYING PROCESS OF THE ZIRCONIA-8 MOL-PERCENT YTTRIA CERAMIC POWDER
    CHEN, YL
    QI, M
    WU, JS
    WANG, DH
    YANG, DZ
    APPLIED PHYSICS LETTERS, 1994, 65 (03) : 303 - 305
  • [48] Micro structural control of stabilized zirconia ceramics (8YSZ) through modified conventional sintering methodologies
    Rajeswari, K.
    Reddy, A. Rajasekhar
    Hareesh, U. S.
    Saha, B. P.
    Johnson, R.
    SCIENCE OF SINTERING, 2010, 42 (01) : 91 - 97
  • [49] Effect of DC and AC electric fields on crack healing behavior in 8 mol% yttria-stabilized cubic zirconia polycrystal
    Kawabata, Shintaro
    Takahashi, Shoma
    Nambu, Kohta
    Morita, Koji
    JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 2023, 106 (10) : 6163 - 6176
  • [50] Yttria-stabilized zirconia (8YSZ) synthesis in a supercritical CO2-assisted process: a parametric study for achieving cubic phase stability
    Avedikian, Loan
    Vulliet, Julien
    David, Thomas
    Hertz, Audrey
    NEW JOURNAL OF CHEMISTRY, 2024, 48 (23) : 10374 - 10383