A Review on Solder Reflow and Flux Application for Flip Chip

被引：3
|
作者：
Suppiah, Sarveshvaran [1 ]
Ong, Nestor Rubio [2 ]
Sauli, Zaliman [1 ]
Sarukunaselan, Karunavani [1 ]
Alcain, Jesselyn Barro [2 ]
Visvanathan, Susthitha Menon [3 ]
Retnasamy, Vithyacharan [1 ]
机构：
[1] Univ Malaysia Perlis, Sch Microelect Engn, Kampus Alam, Arau 02600, Perlis, Malaysia
[2] Univ Santo Tomas, Fac Engn, Manila, Philippines
[3] UKM, Inst Microengn & Nanoelect IMEN, Ukm Bangi 43600, Selangor, Malaysia
来源：
3RD ELECTRONIC AND GREEN MATERIALS INTERNATIONAL CONFERENCE 2017 (EGM 2017) | 2017年 / 1885卷
关键词：
D O I：
10.1063/1.5002458
中图分类号：
X [环境科学、安全科学];
学科分类号：
08 ; 0830 ;
摘要：
This paper encompassed of the evolution and key findings, critical technical challenges, solutions and bonding equipment of solder reflow in flip chip bonding. Upon scrutinizing researches done by others, it can be deduced that peak temperature, time above liquidus, soak temperature, soak time, cooling rate and reflow environment played a vital role in achieving the desired bonding profile. In addition, flux is also needed with the purpose of removing oxides/contaminations on bump surface as well as to promote wetting of solder balls. Electromigration and warpage are the two main challenges faced by solder reflow process which can be overcome by the advancement in under bump metallization (UBM) and substrate technology. The review is ended with a brief description of the current equipment used in solder reflow process.
引用
收藏
页数：7
相关论文
共 50 条
  • [31] Solder alloy selection for flip chip on board
    Rinne, Glenn A.
    Magill, Paul A.
    Machon, Wayne C.
    Mis, J.Daniel
    Baggs, Joseph W.
    Proceedings of the International Symposium and Exhibition on Advanced Packaging Materials Processes, Properties and Interfaces, 1998, : 118 - 122
  • [32] Flip chip and BGA solder joint reliability
    Ye, Hua
    Basaran, Cemal
    Hopkins, Doug
    Liu, Heng
    Cartwright, Alexander
    Advanced Packaging, 2003, 12 (05): : 17 - 19
  • [33] Fabrication on uniform plating-based flip chip solder bumps after reflow process using a polishing mechanism
    Chao, Pen-Shan
    Huang, Jung-Tang
    Hsu, Hou-Jun
    Shih, Sheng-Hsiung
    MICROELECTRONIC ENGINEERING, 2007, 84 (01) : 60 - 71
  • [34] Crack propagation in flip chip solder joints
    Wiese, S
    Jakschik, S
    Feustel, F
    Heeg, J
    Meusel, E
    MICRO MATERIALS, PROCEEDINGS, 2000, : 1273 - 1275
  • [35] Eutectic solder bumped flip chip development
    Akashi, T
    Chikai, T
    Hamano, T
    Yoshida, A
    Honma, S
    Aoki, H
    Miyata, M
    Ezawa, K
    Makita, T
    Miyaoka, M
    TWENTY FIRST IEEE/CPMT INTERNATIONAL ELECTRONICS MANUFACTURING TECHNOLOGY SYMPOSIUM, 1997, : 319 - 325
  • [36] Electroplated solder alloys for flip chip interconnections
    Annala, P
    Kaitila, J
    Salonen, J
    PHYSICA SCRIPTA, 1997, T69 : 115 - 118
  • [37] Solder bumping methods for flip chip packaging
    Rinne, GA
    47TH ELECTRONIC COMPONENTS & TECHNOLOGY CONFERENCE, 1997 PROCEEDINGS, 1997, : 240 - 247
  • [38] Flip chip solder interconnections: A reliability perspective
    Puttlitz, KJ
    Quinones, H
    DESIGN & RELIABILITY OF SOLDERS AND SOLDER INTERCONNECTIONS, 1997, : 359 - 366
  • [39] FLIP-CHIP BONDING WITH SOLDER DIPPING
    BRADY, MJ
    DAVIDSON, A
    REVIEW OF SCIENTIFIC INSTRUMENTS, 1985, 56 (07): : 1459 - 1460
  • [40] Advanced flip-chip solder bonding
    Humpston, G
    Needham, AP
    NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH SECTION A-ACCELERATORS SPECTROMETERS DETECTORS AND ASSOCIATED EQUIPMENT, 1997, 395 (03): : 375 - 378
12345