Rheological behaviour of the mushy zone and its effect on the formation of casting defects during solidification

被引:196
|
作者
Dahle, AK [1 ]
StJohn, DH [1 ]
机构
[1] Univ Queensland, Dept Min Minerals & Mat Engn, CRC Alloy & Solidificat Technol, Brisbane, Qld 4072, Australia
关键词
D O I
10.1016/S1359-6454(98)00342-5
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
A new conceptual framework has been developed which explains the formation of shear-related casting defects such as porosity, segregation and tears. The theory relates defect formation to the mechanical behaviour of the partially solidified microstructure when shear stresses are developed during the filling of a casting and by the subsequent feeding processes during solidification. Two transition points, the dendrite coherency point and the maximum packing solid fraction, divide the mushy zone into three regions of different mechanical and feeding behaviours. The response of the mush to shear is related to the presence of these zones during solidification of a casting. The resulting defects are rationalized by considering the governing local shear stress and shear rate, local strength and time available for fluid flow. The design of the casting, the casting process used and the alloy composition all influence the relative importance of shearing on defect formation. (C) 1998 Acta Metallurgica Inc. Published by Elsevier Science Ltd. All rights reserved.
引用
收藏
页码:31 / 41
页数:11
相关论文
共 50 条
  • [31] Analysis on fluid permeability of dendritic mushy zone during peritectic solidification in a temperature gradient
    Peng Peng
    Jinmian Yue
    Anqiao Zhang
    Xudong Zhang
    Yuanli Xu
    JournalofMaterialsScience&Technology, 2021, 71 (12) : 169 - 176
  • [32] Study on Mushy Zone Coefficient in Solidification Heat Transfer Mathematical Model of Thin Slab with High Casting Speed
    Ding, Zhijun
    Xue, Yuekai
    Zhang, Limin
    Li, Chenxiao
    Wang, Shuhuan
    Ni, Guolong
    PROCESSES, 2023, 11 (11)
  • [33] The thermal analysis of the mushy zone and grain structure changes during directional solidification of superalloys
    An, SU
    Larionov, V
    Monastyrski, V
    Monastyrskaia, E
    Grafas, I
    Oh, JM
    Lim, OD
    Kim, SH
    Lee, JH
    Seo, DY
    SUPERALLOYS 2000, 2000, : 247 - 254
  • [34] Influence of solidification conditions on grain boundary cohesion in the mushy zone during directional solidification of nickel base superalloy
    Zhou, Y. Z.
    Votek, A.
    MATERIALS SCIENCE AND TECHNOLOGY, 2007, 23 (03) : 297 - 302
  • [35] Solute redistribution and Rayleigh number in the mushy zone during directional solidification of Inconel 718
    Wang Ling 1
    2. High Temperature Materials Research Laboratories
    3. National Key Laboratory of Solidification Technology
    China Foundry, 2009, 6 (03) : 208 - 213
  • [36] Analysis on fluid permeability of dendritic mushy zone during peritectic solidification in a temperature gradient
    Peng, Peng
    Yue, Jinmian
    Zhang, Anqiao
    Zhang, Xudong
    Xu, Yuanli
    JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY, 2021, 71 : 169 - 176
  • [37] Segregation with spongy deformation of the mushy zone during solidification of the skin of steel cast products
    Niane, NT
    Gandin, CA
    Lesoult, G
    SOLIDIFICATION AND GRAVITY IV, 2006, 508 : 175 - 180
  • [38] MODELING OF SOLUTE REDISTRIBUTION IN THE MUSHY ZONE DURING SOLIDIFICATION OF ALUMINUM-COPPER ALLOYS
    DIAO, QZ
    TSAI, HL
    METALLURGICAL TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 1993, 24 (04): : 963 - 973
  • [39] Solute redistribution and Rayleigh number in the mushy zone during directional solidification of Inconel 718
    Wang Ling
    Dong Jianxin
    Liu Lin
    Zhang Lei
    CHINA FOUNDRY, 2009, 6 (03) : 208 - 213
  • [40] Effect of Casting Geometry on the Freckle formation During Single Crystal Solidification of Superalloys
    Ma, Dexin
    Xiyou Jinshu Cailiao Yu Gongcheng/Rare Metal Materials and Engineering, 2021, 50 (12): : 4357 - 4364