Novel high strength titanium-titanium composites produced using field-assisted sintering technology (FAST)

被引：22
|
作者：
Calvert, E. L. [1 ]
Knowles, A. J. [2 ]
Pope, J. J. [1 ]
Dye, D. [2 ]
Jackson, M. [1 ]
机构：
[1] Univ Sheffield, Dept Mat Sci & Engn, Mappin St, Sheffield S1 3JD, S Yorkshire, England
[2] Imperial Coll London, Royal Sch Mines, Dept Mat, Prince Consort Rd, London SW7 2BP, England
来源：
SCRIPTA MATERIALIA | 2019年 / 159卷
基金：
英国工程与自然科学研究理事会;
关键词：
Titanium alloys; Metal matrix composite; Spark plasma sintering; Phase transformations; Omega; TI TERNARY-SYSTEM; PHASE-EQUILIBRIA; ALLOYS; POWDER;
D O I：
10.1016/j.scriptamat.2018.08.036
中图分类号：
TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
To increase the strength of titanium alloys beyond that achievable with alpha-beta microstructures, alternative reinforcing methods are necessary. Here, field-assisted sintering technology (FAST) has been used to produce a novel Ti-5Al-5Mo-5V-3Cr (Ti-5553) metal-matrix-composite (MMC) reinforced with 0-25 wt.% of a similar to 2 GPa yield strength TiFeMo alloy strengthened by ordered body-centred cubic intermetallic and to phases. The interdiffusion region between Ti-5553 and TiFeMo particles was studied by modelling, electron microscopy, and nanoindentation to examine the effect of graded composition on mechanical properties and formation of a, intermetallic, and omega phases, which resulted in a >200 MPa strengthening benefit over unreinforced Ti-5553. (C) 2018 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.
引用
收藏
页码：51 / 57
页数：7
相关论文
共 50 条
  • [21] Powder to products: Producing lightweight, high strength aluminum alloy−sic composites using field assisted sintering
    Alagic, Sven
    Kulkarni, Anil
    Singh, Jogender
    Advanced Materials and Processes, 2019, 177 (02): : 16 - 21
  • [22] Reaction-bond composite synthesis of SiC-TiB2 by spark plasma sintering/field-assisted sintering technology (SPS/FAST)
    Cramer, Corson L.
    McMurray, Jacob W.
    Lance, Michael J.
    Lowden, Richard A.
    JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2020, 40 (04) : 988 - 995
  • [23] CIP-FAST: assessing the production of complex geometry titanium components from powders by combining Cold Isostatic Pressing (CIP) and Field Assisted Sintering Technology (FAST)
    Graham, S. J.
    Azakli, Y.
    Withey, J.
    Jackson, M.
    POWDER METALLURGY, 2023, 66 (05) : 482 - 492
  • [24] Fast joining SiC ceramics with Ti3SiC2 tape film by electric field-assisted sintering technology
    Zhou, Xiaobing
    Han, Young-Hwan
    Shen, Xiangfeng
    Du, Shiyu
    Lee, Jaehyung
    Huang, Qing
    JOURNAL OF NUCLEAR MATERIALS, 2015, 466 : 322 - 327
  • [25] POWDER TO PRODUCTS: PRODUCING LIGHTWEIGHT, HIGH STRENGTH ALUMINUM ALLOY-SiC COMPOSITES USING FIELD ASSISTED SINTERING
    Alagic, Sven
    Kulkarni, Anil
    Singh, Jogender
    ADVANCED MATERIALS & PROCESSES, 2019, 177 (02): : 16 - 21
  • [26] A Machinability Assessment of the Novel Application of Field-Assisted Sintering Technology to Diffusion Bond (FAST-DB) and Functionally Grade Dissimilar Nickel-Based Superalloys
    Lister, Samuel
    Blanch, Oliver Levano
    Fernandez, Daniel Suarez
    Pope, Jacob
    Baxter, Gavin J.
    Bray, Simon
    Jackson, Martin
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2023, 54 (11): : 4396 - 4408
  • [27] A Machinability Assessment of the Novel Application of Field-Assisted Sintering Technology to Diffusion Bond (FAST-DB) and Functionally Grade Dissimilar Nickel-Based Superalloys
    Samuel Lister
    Oliver Levano Blanch
    Daniel Suarez Fernandez
    Jacob Pope
    Gavin J Baxter
    Simon Bray
    Martin Jackson
    Metallurgical and Materials Transactions A, 2023, 54 : 4396 - 4408
  • [28] A novel two-step field-assisted sintering method to prepare (MgCoNiCuZn)O high entropy oxide
    Zhao, Yipeng
    Li, Hongwei
    Chen, Guoqing
    Wang, Yakun
    Wang, Kang
    Fu, Xuesong
    Zhou, Wenlong
    JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2023, 22 : 3108 - 3114
  • [29] Fabrication of titanium carbide-reinforced iron matrix composites using electropulsing-assisted flash sintering
    Xiang, Siqi
    Ren, Shaofei
    Liang, Yihan
    Zhang, Xinfang
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2019, 768
  • [30] Titanium/aluminum diborides in composites produced in the cBN-TiC-Al system by reaction sintering under high pressure
    M. P. Bezhenar
    S. A. Bozhko
    T. O. Garbuz
    N. M. Bilyavyna
    V. Ya. Markiv
    Journal of Superhard Materials, 2008, 30 : 317 - 325
12345