Investigation of Machinability in Minimum Quantity Lubrication Milling of GH4169 Aerospace Superalloy

被引：2
|
作者：
Yuan, S. M. [1 ]
Yan, L. T. [1 ]
Liu, W. D. [1 ]
Liu, Q. [1 ]
机构：
[1] Beihang Univ, Sch Mech Engn & Automat, Beijing 100191, Peoples R China
来源：
MECHANICAL ENGINEERING AND GREEN MANUFACTURING, PTS 1 AND 2 | 2010年
关键词：
Green machining; Minimum quantity lubrication (MQL); Aerospace superalloy; Cutting parameters; Cutting force; Surface finish; INCONEL; 718; TOOL; MQL;
D O I：
10.4028/www.scientific.net/AMM.34-35.666
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Due to environmental concerns and the coming legislations, pollution-free and eco-friendly minimum quantity lubrication (MQL) technology has become focus of attention in manufacture field. The MQL and cooling system in this work has been designed, fabricated and used. The cutting performance of MQL with cooling air compare with the conventional cooling method in milling of GH4169 aerospace superalloy is evaluated based on analysis of cutting force and surface finish. The effect of cutting parameters (depth of cut, feed rate) on machining performances is analyzed. The experimental results show that, the application of MQL and cooling air brings about a lower cutting force, better surface finish compared to conventional coolant environment.
引用
收藏
页码：666 / 670
页数：5
相关论文
共 50 条
  • [41] Properties of GH4169 Superalloy Characterized by Nonlinear Ultrasonic Waves
    Yan, Hongjuan
    Xu, Chunguang
    Xiao, Dingguo
    Cai, Haichao
    ADVANCES IN MATERIALS SCIENCE AND ENGINEERING, 2015, 2015
  • [42] Investigation of microstructure and mechanical properties of GH4169 superalloy joint produced by linear friction welding
    Yang, Xiawei
    Ma, ShiTong
    Chu, Qiang
    Peng, Chong
    Su, Yu
    Xiao, Bo
    Guo, ZhenGuo
    Ma, Tiejun
    Li, Wenya
    JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2023, 24 : 8373 - 8390
  • [43] Investigation of High-Speed Rubbing Behavior of GH4169 Superalloy with SiC/SiC Composites
    Mi, Zhaoguo
    Jiang, Kanghe
    Yang, Yicheng
    Cheng, Zhenhua
    Yang, Weihua
    Sun, Zhigang
    AEROSPACE, 2024, 11 (05)
  • [44] Investigation of small fatigue crack initiation and growth behaviour of nickel base superalloy GH4169
    Zhu, L.
    Wu, Z. R.
    Hu, X. T.
    Song, Y. D.
    FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, 2016, 39 (09) : 1150 - 1160
  • [45] Experimental investigation on the growth behavior of naturally-initiated small cracks in superalloy GH4169
    Zhang, Li
    Wu, Xueren
    Huang, Xinyue
    Hangkong Xuebao/Acta Aeronautica et Astronautica Sinica, 2015, 36 (03): : 840 - 847
  • [46] Analysis of Tool Wear in GH4169 Material Milling Process
    Li, Xueguang
    Zhang, Wang
    Miao, Liqin
    Pang, Zhaohuan
    LUBRICANTS, 2023, 11 (06)
  • [47] Defect suppression and grain refinement during ultrasonic vibration-assisted side milling of GH4169 superalloy
    Chang, Baoqi
    Yi, Zhaoxi
    Cao, Xiaobing
    Duan, Ji-an
    JOURNAL OF MANUFACTURING PROCESSES, 2023, 85 : 281 - 294
  • [48] Experimental study of surface integrity in ultrasonic vibration–assisted milling of GH4169 nickel-based superalloy
    Jian Sun
    Pengyang Li
    Shen Zhang
    Yunshuai Chen
    Han Lu
    Guoqing Chen
    Ding Shao
    The International Journal of Advanced Manufacturing Technology, 2023, 129 : 5047 - 5058
  • [49] Evolutions of multidimensional wear features in ball-end milling of Ni-based superalloy GH4169
    Luo, Huan
    Li, Jing
    Zhang, Dinghua
    Luo, Ming
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2024, 131 (3-4): : 1267 - 1287
  • [50] Evolutions of multidimensional wear features in ball-end milling of Ni-based superalloy GH4169
    Huan Luo
    Jing Li
    Dinghua Zhang
    Ming Luo
    The International Journal of Advanced Manufacturing Technology, 2024, 131 : 1267 - 1287
12345