Experimental Study on Effect of Stacking Sequence, Clearance and Clamping Torque on Strength of FRP Composite Bolted Joints

被引：0
|
作者：
Vineeth, Kumar T. V. [1 ]
Shankar, G. S. Shiva [1 ]
Shankar, B. Latha [2 ]
机构：
[1] Siddaganga Inst Technol, Mech Engn Dept, Tumakuru 572104, India
[2] Siddaganga Inst Technol, Ind Engn & Management Dept, Tumakuru 572104, India
来源：
MATERIALS TODAY-PROCEEDINGS | 2017年 / 4卷 / 10期
关键词：
Composites; Bolted Joints; Stacking Sequence;
D O I：
暂无
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The work presented in this paper covers an experimental study on finding the effect of fiber volume fraction, width to diameter (W/D) ratio and clamping pressure on single bolted lap joint of woven jute fabric reinforced epoxy and woven glass fiber reinforced epoxy (GFRP) composites. Composite laminates were prepared by hand layup technique and were made with two different fiber volume fractions. GFRP laminates were made with three staking sequence. For each volume fraction, four different W/D ratios were studied. In each group unnotched member was also fabricated and tested to determine the efficiency of the joint. All the tests were conducted on Zwick universal testing machine. The result of the study indicates that the joint efficiency increases continuously with the increase in the fiber volume fraction but decreases with the increase in W/D ratio. Tension and cleavage type of failure modes were observed on the specimens. The effect of clamping pressure and clearance on joint strength of GFRP laminates is also presented. (C) 2017 Elsevier Ltd. All rights reserved.
引用
收藏
页码：10746 / 10750
页数：5
相关论文
共 50 条
  • [21] Experimental determination of bearing strength in fiber reinforced laminated composite bolted joints under preload
    Sayman, Onur
    Siyahkoc, Ramazan
    Sen, Faruk
    Ozcan, Resat
    JOURNAL OF REINFORCED PLASTICS AND COMPOSITES, 2007, 26 (10) : 1051 - 1063
  • [22] New Method to Study The Effect of Stacking Sequence on Composite Single-Lap Joint Strength
    Xiang, Jingwei
    Guan, Zhidong
    Li, Zengshan
    PROCEEDINGS OF THE 2017 4TH INTERNATIONAL CONFERENCE ON MACHINERY, MATERIALS AND COMPUTER (MACMC 2017), 2017, 150 : 456 - 460
  • [23] Experimental study and DEM modelling of bolted composite lap joints subjected to tension
    Yu, Min
    Yang, Biying
    Chi, Yin
    Xie, Jiaxin
    Ye, Jianqiao
    COMPOSITES PART B-ENGINEERING, 2020, 190
  • [24] Effect of Tightening Torque on Bearing Performance of Kevlar Fiber Composite Bolted Joints Produced by Additive Manufacturing
    Ravelli, M.
    Giorleo, L.
    Papa, I.
    Silvestri, A.
    Mascolo, R.
    Squillace, A.
    DYNAMIC RESPONSE AND FAILURE OF COMPOSITE MATERIALS, DRAF 2024, 2025, : 49 - 54
  • [25] Effect of the natural aging process on the shear strength of FRP composite single lap joints
    Hunter-Alarcon, R. A.
    Vizan, A.
    Perez, J.
    Leyrer, J.
    Hidalgo, P.
    Pavez, B.
    da Silva, L. F. M.
    INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES, 2018, 86 : 4 - 12
  • [26] The effect of preload on failure response of glass-epoxy laminated composite bolted-joints with clearance
    Pakdil, Murat
    Sen, Faruk
    Sayman, Onur
    Benli, Semih
    JOURNAL OF REINFORCED PLASTICS AND COMPOSITES, 2007, 26 (12) : 1239 - 1252
  • [27] Experimental Failure Analysis of Glass-Epoxy Laminated Composite Bolted-Joints with Clearance Under Preload
    Sen, Faruk
    Pakdil, Murat
    Sayman, Onur
    Benli, Semih
    INTERNATIONAL JOURNAL OF DAMAGE MECHANICS, 2011, 20 (02) : 163 - 178
  • [28] Effect of Stacking Sequence on Open-Hole Tensile Strength of Composite Laminates
    Hallett, Stephen R.
    Jiang, Wen-Guang
    Wisnom, Michael R.
    AIAA JOURNAL, 2009, 47 (07) : 1692 - 1699
  • [29] Experimental study of bonded, bolted, and hybrid braided CFRP joints with different stacking sequences and lapping patterns
    Jiang, Lanxin
    Xiao, Shoune
    Dong, Dawei
    Yang, Bing
    Chen, Dongdong
    Yang, Guangwu
    Zhu, Tao
    Wang, Mingmeng
    THIN-WALLED STRUCTURES, 2022, 177
  • [30] Investigation the effect of tightening torque on the fatigue strength of double lap simple bolted and hybrid (bolted-bonded) joints using volumetric method
    Esmaeili, F.
    Zehsaz, M.
    Chakherlou, T. N.
    MATERIALS & DESIGN, 2014, 63 : 349 - 359
12345