Experimental Study on Effect of Stacking Sequence, Clearance and Clamping Torque on Strength of FRP Composite Bolted Joints

被引：0
|
作者：
Vineeth, Kumar T. V. [1 ]
Shankar, G. S. Shiva [1 ]
Shankar, B. Latha [2 ]
机构：
[1] Siddaganga Inst Technol, Mech Engn Dept, Tumakuru 572104, India
[2] Siddaganga Inst Technol, Ind Engn & Management Dept, Tumakuru 572104, India
来源：
MATERIALS TODAY-PROCEEDINGS | 2017年 / 4卷 / 10期
关键词：
Composites; Bolted Joints; Stacking Sequence;
D O I：
暂无
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The work presented in this paper covers an experimental study on finding the effect of fiber volume fraction, width to diameter (W/D) ratio and clamping pressure on single bolted lap joint of woven jute fabric reinforced epoxy and woven glass fiber reinforced epoxy (GFRP) composites. Composite laminates were prepared by hand layup technique and were made with two different fiber volume fractions. GFRP laminates were made with three staking sequence. For each volume fraction, four different W/D ratios were studied. In each group unnotched member was also fabricated and tested to determine the efficiency of the joint. All the tests were conducted on Zwick universal testing machine. The result of the study indicates that the joint efficiency increases continuously with the increase in the fiber volume fraction but decreases with the increase in W/D ratio. Tension and cleavage type of failure modes were observed on the specimens. The effect of clamping pressure and clearance on joint strength of GFRP laminates is also presented. (C) 2017 Elsevier Ltd. All rights reserved.
引用
收藏
页码：10746 / 10750
页数：5
相关论文
共 50 条
  • [1] Effect of torque tightening on the fatigue strength of bolted joints
    Minguez, Jose Maria
    Vogwell, Jeffrey
    ENGINEERING FAILURE ANALYSIS, 2006, 13 (08) : 1410 - 1421
  • [2] EFFECT OF RADIAL CLEARANCE BETWEEN BOLT AND WASHER ON THE BEARING STRENGTH OF COMPOSITE BOLTED JOINTS
    HERRINGTON, PD
    SABBAGHIAN, M
    JOURNAL OF COMPOSITE MATERIALS, 1992, 26 (12) : 1826 - 1843
  • [3] Effect of clamping force on the strength of bolted joints in pultruded GFRP laminates
    Public Works Res. Inst., Minamihara, Tsukuba, 305-8516
    Zairyo, 2007, 11 (999-1004):
  • [4] Experimental study on effects of clearance on single bolt, single shear, composite bolted joints
    Lawlor, VP
    McCarthy, MA
    Stanley, WF
    PLASTICS RUBBER AND COMPOSITES, 2002, 31 (09) : 405 - 411
  • [5] Effects of bolt torque tightening on the strength and fatigue life of airframe FRP laminate bolted joints
    Giannopoulos, Ioannis K.
    Doroni-Dawes, Damian
    Kourousis, Kyriakos I.
    Yasaee, Mehdi
    COMPOSITES PART B-ENGINEERING, 2017, 125 : 19 - 26
  • [6] Behaviour of bolted composite joints:: experimental study
    Kovács, N
    Calado, L
    Dunai, L
    JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH, 2004, 60 (3-5) : 725 - 738
  • [7] An experimental study of the torque-tension relationship for bolted joints
    Jiang, YY
    Chang, JJ
    Lee, CH
    INTERNATIONAL JOURNAL OF MATERIALS & PRODUCT TECHNOLOGY, 2001, 16 (4-5): : 417 - 429
  • [8] Experimental Study on Fatigue Behavior of Adhesive & Bolted Hybrid FRP Joints
    Wang J.
    Li S.
    Cheng B.
    Yan X.
    Zhang K.
    Huanan Ligong Daxue Xuebao/Journal of South China University of Technology (Natural Science), 2022, 50 (11): : 95 - 106
  • [9] Experimental and Numerical Study of the Fatigue Strength of Double Lap Bolted Joints and the Effect of Torque Tightening on the Fatigue Life of Jointed Plates
    F. Esmaeili
    M. Zehsaz
    T. N. Chakherlou
    S. Hasanifard
    Transactions of the Indian Institute of Metals, 2014, 67 : 581 - 588
  • [10] Experimental and Numerical Study of the Fatigue Strength of Double Lap Bolted Joints and the Effect of Torque Tightening on the Fatigue Life of Jointed Plates
    Esmaeili, F.
    Zehsaz, M.
    Chakherlou, T. N.
    Hasanifard, S.
    TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 2014, 67 (04) : 581 - 588
12345