Numerical failure assessment of multi-bolt FRP composite joints with varying sizes and preloads of bolts

被引：54
|
作者：
Mandal, Bibekananda [1 ]
Chakrabarti, Anupam [1 ]
机构：
[1] Indian Inst Technol Roorkee, Dept Civil Engn, Roorkee 247667, Uttar Pradesh, India
来源：
COMPOSITE STRUCTURES | 2018年 / 187卷
关键词：
Failure analysis; FRP composite; Finite element analysis; Progressive damage; ABAQUS user-subroutine; FINITE-ELEMENT-ANALYSIS; HOLE CLEARANCE; LOAD DISTRIBUTION; SINGLE-BOLT; DOUBLE-LAP; STRENGTH; CRITERIA; TORQUE; DAMAGE; MODEL;
D O I：
10.1016/j.compstruct.2017.12.048
中图分类号：
O3 [力学];
学科分类号：
08 ; 0801 ;
摘要：
A three dimensional (3D) progressive damage model (PDM) is developed for the failure assessment of fibre reinforced plastic (FRP) composite bolted joints subjected to bolt preloads. Material constitutive equations and material damage model are defined in a user-subroutine UMAT which is integrated with the finite element (FE) software ABAQUS. Fibre and matrix failure in tension, compression or in shear along with delamination failure criteria are incorporated in the present numerical model. Load-displacement behavior, laminate surface strains, propagation of damage and failure of a double-lap multi-bolt composite joint have been studied and present results are validated with the results available in literature. Failure of double-lap multi-bolt FRP joints with different bolt diameters and bolt tightening torques have been investigated using the proposed progressive damage model.
引用
收藏
页码：169 / 178
页数：10
相关论文
共 50 条
  • [31] Pin-load distribution homogenization method of adjusting bolt-hole clearance and bolt torqued in multi-bolt composite joints
    Li P.
    Zhou W.
    Li B.
    Shao J.
    Hangkong Xuebao/Acta Aeronautica et Astronautica Sinica, 2019, 40 (03):
  • [32] A modified stiffness method considering effects of hole tensile deformation on bolt load distribution in multi-bolt composite joints
    Zhao, Libin
    Fang, Ziang
    Liu, Fengrui
    Shan, Meijuan
    Zhang, Jianyu
    COMPOSITES PART B-ENGINEERING, 2019, 171 : 264 - 271
  • [33] A global bolted joint model for finite element analysis of load distributions in multi-bolt composite joints
    Gray, P. J.
    McCarthy, C. T.
    COMPOSITES PART B-ENGINEERING, 2010, 41 (04) : 317 - 325
  • [34] Research on pin load distribution and joining strength for multi-bolt beveled-lap composite joints
    Zhu, Honghong
    Li, Cheng
    He, Long
    Tie, Ying
    Jixie Gongcheng Xuebao/Journal of Mechanical Engineering, 2012, 48 (20): : 57 - 62
  • [35] A parametric study on static behavior and load sharing of multi-bolt hybrid bonded/bolted composite joints
    Romanov, Valentin S.
    Heidari-Rarani, Mohammad
    Lessard, Larry
    COMPOSITES PART B-ENGINEERING, 2021, 217 (217)
  • [36] Investigation on in-plane shear behavior of large-size composite plates with multi-bolt joints
    Zhang, Fa
    Hu, Zhendong
    Gao, Limin
    Wan, Yumin
    Jin, Limin
    Jia, Xiwen
    Wang, Ke
    Ma, Qian
    COMPOSITE STRUCTURES, 2020, 232
  • [37] A simple method for determining the effects of bolt-hole clearance on load distribution in single-column multi-bolt composite joints
    McCarthy, MA
    McCarthy, CT
    Padhi, GS
    COMPOSITE STRUCTURES, 2006, 73 (01) : 78 - 87
  • [38] Probabilistic bolt load distribution analysis of composite single-lap multi-bolt joints considering random bolt-hole clearances and tightening torques
    Liu, Fengrui
    Shan, Meijuan
    Zhao, Libin
    Zhang, Jianyu
    COMPOSITE STRUCTURES, 2018, 194 : 12 - 20
  • [39] An analytical joint stiffness model for load transfer analysis in highly torqued multi-bolt composite joints with clearances
    Liu, Fengrui
    Zhang, Jianyu
    Zhao, Libin
    Xin, An
    Zhou, Longwei
    COMPOSITE STRUCTURES, 2015, 131 : 625 - 636
  • [40] An analytical model for the prediction of load distribution in multi-bolt composite joints including hole-location errors
    Lecomte, J.
    Bois, C.
    Wargnier, H.
    Wahl, J. -C.
    COMPOSITE STRUCTURES, 2014, 117 : 354 - 361
12345