Low-temperature process to improve the leakage current of (Ba, Sr)TiO3 films on Pt/TiN/Ti/Si substrates

被引：4

作者：

Hwang, CC ^{[1
]}

Lai, MJ

Jaing, CC

Chen, JS

Huang, S

Juang, MH

Cheng, HC

机构：

[1] Natl Chiao Tung Univ, Dept Elect Engn, Hsinchu, Taiwan

[2] Natl Chiao Tung Univ, Inst Elect, Hsinchu 30039, Taiwan

[3] Nat Sci Council, Precis Instrument Dev Ctr, Hsinchu, Taiwan

[4] Mosel Vitelic Inc, Hsinchu, Taiwan

[5] Natl Taiwan Univ Sci & Technol, Dept Elect Engn, Taipei, Taiwan

来源：

JAPANESE JOURNAL OF APPLIED PHYSICS PART 2-LETTERS | 2000年 / 39卷 / 12B期

关键词：

BST films; RF cosputtering; oxygen vacancies; O-2; plasma; low temperature;

D O I：

10.1143/JJAP.39.L1314

中图分类号：

O59 [应用物理学];

学科分类号：

摘要：

In this study, we employed an oxygen plasma post-treatment to improve the leakage characteristics of Pt/(Ba, Sr)TiO3(BST)/Pt capacitors prepared by the RF cosputtering technique. Applying oxygen plasma treatment to BST thin films can effectively passivate the oxygen vacancies of the BST films, thus decreasing the electric conduction paths of leakage current. The leakage current is reduced by as many as two orders of magnitude by this low-temperature (250 degreesC) and short duration (similar to5 min) process. However, the usage of oxygen plasma treatment is not unrestricted. Plasma treatment over a long time (more than 10 min) degrades the leakage characteristics, due to plasma damage. Therefore, a proper oxygen plasma treatment for as-deposited BST films is desired to improve leakage characteristics of BST thin films.

引用

页码：L1314 / L1316

页数：3

共 50 条

[41] Effects of the interfacial layers on the time-dependent leakage current characteristics of (Ba,Sr)TiO3 thin films
Korea Advanced Inst of Science and, Technology, Taejon, Korea, Republic of
Jpn J Appl Phys Part 1 Regul Pap Short Note Rev Pap, 12 A (6472-6475):
[42] Low-Temperature Preparation of (Ba,Sr)TiO3 Perovskite Phase by Sol-Gel Method
Hiroyuki Shiibashi
Hirofumi Matsuda
Makoto Kuwabara
Journal of Sol-Gel Science and Technology, 1999, 16 : 129 - 134
[43] Low-temperature preparation of (Ba,Sr)TiO3 perovskite phase by sol-gel method
Shiibashi, H
Matsuda, H
Kuwabara, M
JOURNAL OF SOL-GEL SCIENCE AND TECHNOLOGY, 1999, 16 (1-2) : 129 - 134
[44] Impedance Properties of Low-Temperature Sintered CuO-doped (Ba, Sr)TiO3 Ceramics
Shin, Dong-Jin
Yun, Seok-Woo
Ahn, Joong-Hyeon
Koh, Jung-Hyuk
Science of Advanced Materials, 2016, 8 (09) : 1809 - 1812
[45] Dielectric and leakage current properties of Li doped (Ba,Sr)TiO3 thick film interdigital capacitors on the alumina substrates
Kim, Se-Ho
Koh, Jung-Hyuk
JOURNAL OF PHYSICS AND CHEMISTRY OF SOLIDS, 2010, 71 (03) : 219 - 222
[46] High-tunability and low-leakage current of the polycrystalline compositionally graded (Ba,Sr)TiO3 thin films derived by a sol-gel process
Wang, Jun
Zhang, Tianjin
Xiang, Junhuai
Zhang, Baishun
MATERIALS CHEMISTRY AND PHYSICS, 2008, 108 (2-3) : 445 - 448
[47] Simulation of leakage currents in (Ba,Sr)TiO3 thin films with extracted charge profile
Li, JT
Dong, XL
Chen, Y
MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING, 2005, 13 (05) : 699 - 705
[48] Defects-related leakage behaviors and degradation mechanisms of (Ba,Sr)TiO3 films
Hara, T
INTEGRATED FERROELECTRICS, 2005, 70 : 79 - 88
[49] Thickness dependence of leakage current behavior in epitaxial (Ba,Sr)TiO3 film capacitors
Ahn, KH
Kim, SS
Baik, S
JOURNAL OF APPLIED PHYSICS, 2003, 93 (03) : 1725 - 1730
[50] Dielectric Properties of ZnBO Doped (Ba,Sr)TiO3 Ceramics for the Low Temperature Sintering Process
Kim, Se-Ho
Koh, Jung-Hyuk
INTEGRATED FERROELECTRICS, 2009, 110 : 17 - 24

← 1 2 3 4 5 →