Mechanical properties of polyamide 6 (pa6)/ethylene vinyl acetate (eva)/sepiolite composite

被引:3
|
作者
Fauzi, Noora'tiqah Mohamad [1 ]
Mohamad, Zurina [1 ]
机构
[1] Univ Teknol Malaysia, Fac Chem Engn, Dept Polymer Engn, Skudai, Malaysia
来源
关键词
polyamide; 6; ethylene vinyl acetate; sepiolite; mechanical properties;
D O I
10.4028/www.scientific.net/AMM.554.62
中图分类号
TH [机械、仪表工业];
学科分类号
0802 ;
摘要
The objective of this study is to investigate the effect of sepiolite concentration (2-10 phr) on the mechanical properties of polyamide 6 (PA6) / ethylene vinyl acetate (EVA) blend at the ratio 80/20. Twin screw extruder and injection moulding machine were used to prepare the samples. The strength and modulus of flexural was increased until 6 phr of sepiolite content. On the other hand, the impact strength of PA6/EVA/sepiolite composite was decreased gradually as sepiolite content increased.
引用
收藏
页码:62 / 65
页数:4
相关论文
共 50 条
  • [41] The Rheological and Mechanical Properties of Ethylene-Vinyl Acetate (EVA) Copolymer and Organoclay Nanocomposites
    Chacko, Annet
    Sadiku, E. R.
    Vorster, O. C.
    JOURNAL OF REINFORCED PLASTICS AND COMPOSITES, 2010, 29 (04) : 558 - 570
  • [42] Oxygen barrier and mechanical properties of masterbatch-based PA6/nanoclay composite films
    Fasihi, Mohammad
    Abolghasemi, Mohammad Reza
    JOURNAL OF APPLIED POLYMER SCIENCE, 2012, 125 : E2 - E8
  • [43] Mechanical, Chemical, Thermal, and Rheological Properties of Recycled PA6/ABS Binary and PA6/PA66/ABS Ternary Blends
    Kuram, Emel
    Sarac, Levent
    Ozcelik, Babur
    Yilmaz, Faruk
    JOURNAL OF APPLIED POLYMER SCIENCE, 2014, 131 (18) : 9603 - 9610
  • [44] Polyamide 6 (PA6)/carbon nanotubes (MWCNT) nanocomposites for antistatic application: tailoring mechanical and electrical properties for electronic product protection
    Fabiano Santana da Silva
    Carlos Bruno Barreto Luna
    Eduardo da Silva Barbosa Ferreira
    Anna Raffaela de Matos Costa
    Renate Maria Ramos Wellen
    Edcleide Maria Araújo
    Journal of Polymer Research, 2024, 31
  • [45] Morphology and Mechanical Properties of Acrylonitrile-Butadiene-Styrene (ABS)/Polyamide 6 (PA6) Nanocomposites Prepared via Melt Mixing
    Yan, Wei
    Qin, Shuhao
    Guo, Jianbing
    Zhang, Minmin
    He, Min
    Yu, Jie
    JOURNAL OF MACROMOLECULAR SCIENCE PART B-PHYSICS, 2012, 51 (1-3): : 70 - 82
  • [46] Polyamide 6 (PA6)/carbon nanotubes (MWCNT) nanocomposites for antistatic application: tailoring mechanical and electrical properties for electronic product protection
    da Silva, Fabiano Santana
    Luna, Carlos Bruno Barreto
    Ferreira, Eduardo da Silva Barbosa
    Costa, Anna Raffaela de Matos
    Wellen, Renate Maria Ramos
    Araujo, Edcleide Maria
    JOURNAL OF POLYMER RESEARCH, 2024, 31 (01)
  • [47] Fabrication of ethylene-vinyl acetate copolymer/polyamide/modified sepiolite composite with improved physical properties via e-beam irradiation
    Ahmed, Jawad
    Mushtaq, Sidra
    Adeel, Mister
    Radiation Physics and Chemistry, 2021, 189
  • [48] Mechanical, chemical, thermal, and rheological properties of recycled PA6/ABS binary and PA6/PA66/ABS ternary blends
    Ozcelik, B. (ozcelik@gyte.edu.tr), 1600, John Wiley and Sons Inc (131):
  • [49] Fabrication of ethylene-vinyl acetate copolymer/polyamide/modified sepiolite composite with improved physical properties via e-beam irradiation
    Ahmed, Jawad
    Mushtaq, Sidra
    Adeel, Mister
    RADIATION PHYSICS AND CHEMISTRY, 2021, 189
  • [50] Morphology and mechanical properties of ethylene-vinyl acetate rubber/polyamide thermoplastic elastomers
    Wu, Wenjing
    Wan, Chaoying
    Zhang, Yong
    JOURNAL OF APPLIED POLYMER SCIENCE, 2013, 130 (01) : 338 - 344