Modeling of Stress-Strain State of Piping Systems with Erosion and Corrosion Wear

被引：1

作者：

Doroshenko, Ya, V ^{[1
]}

Oliynyk, A. P. ^{[2
]}

Karpash, O. M. ^{[3
]}

机构：

[1] Ivano Frankivsk Natl Tech Univ Oil & Gas, Dept Gas & Oil Pipelines & Storages, Ivano Frankivsk, Ukraine

[2] Ivano Frankivsk Natl Tech Univ Oil & Gas, Dept Appl Math, Ivano Frankivsk, Ukraine

[3] Ivano Frankivsk Natl Tech Univ Oil & Gas, Dept Energy Management & Tech Diagnost, Ivano Frankivsk, Ukraine

来源：

PHYSICS AND CHEMISTRY OF SOLID STATE | 2020年 / 21卷 / 01期

关键词：

ring stresses; erosion; corrosion; bend; internal pressure; cylindrical coordinate system;

D O I：

10.15330/pcss.21.1.151-156

中图分类号：

TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

The problems of modeling the stress-deformed state of erosion or corrosion-worn rectilinear sections and the ball-shaped bends of pipeline systems are proposed to solve in a cylindrical coordinate system. For this purpose, formulas of Christophell type II, non-zero components of the strain tensor and a system of equilibrium equations in the framework of linear torsional theory are given. The system of equilibrium equations is reduced to one equation, which is the basic equation of the Lame' s problem. Formulas for the calculation of ring stresses that occur in the wall of erosion or corrosion worn rectilinear sections, and the removal of pipelines from the action of internal pressure are derived. The influence of the change in the wall thickness of the pipeline bends in the place of their erosion or corrosion wear on the amount of ring stresses is determined.

引用

页码：151 / 156

页数：6

共 50 条

[21] On Modeling and Method of Nondestructive Reconstruction of Residual Stress-Strain State in a Rod
Dudarev, V.
Nedin, R.
Vatulyan, A.
MECHANICS, RESOURCE AND DIAGNOSTICS OF MATERIALS AND STRUCTURES (MRDMS-2016), 2016, 1785
[22] Modeling of the stress-strain state of the ground mass contaminated with peracetic acid
Levenko, Anna
6TH INTERNATIONAL SCIENTIFIC CONFERENCE RELIABILITY AND DURABILITY OF RAILWAY TRANSPORT ENGINEERING STRUCTURES AND BUILDINGS (TRANSBUD-2017), 2017, 116
[23] Mathematical modeling of the stress-strain state of adhesive layers in sandwich structures
Huang, SJ
MECHANICS OF COMPOSITE MATERIALS, 2002, 38 (02) : 103 - 120
[24] Modeling stress-strain state of cancellous bone tissue fragments in compression
Chaykovskaya, Tatyana V.
Marchenko, Ekaterina S.
Yasenchuk, Yuri F.
Baigonakova, Gulsharat A.
Volinsky, Alex A.
MECHANICS OF ADVANCED MATERIALS AND STRUCTURES, 2024,
[25] Development of Software for Calculation of Erosion-Corrosion Wear of NPP Reactor Piping
V. I. Baranenko
S. G. Oleinik
V. N. Merkushev
M. B. Bakirov
A. V. Kumov
Strength of Materials, 2004, 36 (1) : 59 - 62
[26] MODELING A COMPLEX PROBLEM ON THE STRESS-STRAIN STATE OF A CASTING IN THE SOFTWARE ProCAST
Abdullin, A. D.
METALLURGIST, 2011, 55 (7-8) : 537 - 542
[27] Mathematical modeling of the stress-strain state of adhesive layers in sandwich structures
Song-Jeng H.
Mechanics of Composite Materials, 2002, 38 (2) : 103 - 120
[28] Modeling a complex problem on the stress-strain state of a casting in the software ProCAST
A. D. Abdullin
Metallurgist, 2011, 55 : 537 - 542
[29] Modeling and Model Verification of the Stress-Strain State of Reinforced Polymer Concrete
Yelemessov, Kassym
Sabirova, Layla B.
Martyushev, Nikita V.
Malozyomov, Boris V.
Bakhmagambetova, Gulnara B.
Atanova, Olga V.
MATERIALS, 2023, 16 (09)
[30] Disturbed state constitutive modeling based on stress-strain and nondestructive behavior
Desai, CS
Toth, J
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, 1996, 33 (11) : 1619 - 1650

← 1 2 3 4 5 →