Influence of the Structural State on the Development of the Dynamics of Friction Processes during Dry Sliding Friction of Ferritic-Pearlitic Steel

被引：0

作者：

Shamarin, N. N. ^{[1
]}

Kushnarev, Yu, V ^{[1
]}

Filippov, A., V ^{[1
]}

Tarasov, S. Yu ^{[1
]}

机构：

[1] Inst Strength Phys & Mat Sci SB RAS, Tomsk 634055, Russia

来源：

PROCEEDINGS OF THE INTERNATIONAL CONFERENCE ON PHYSICAL MESOMECHANICS. MATERIALS WITH MULTILEVEL HIERARCHICAL STRUCTURE AND INTELLIGENT MANUFACTURING TECHNOLOGY | 2020年 / 2310卷

关键词：

ACOUSTIC-EMISSION; WEAR; WIRE;

D O I：

10.1063/5.0034187

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

The research presents the results of experimental studies of the dynamics of dry sliding friction of samples of ferritic-pearlitic steel with a different structural state. Two sets of samples were used for experimental studies. The first set of samples was 13Mn6 (DIN 17145) ferrite-pearlite steel plate after deformation by rolling. The second set of samples was plates printed by electron beam additive manufacturing. The influence of the structural state of steel samples on the development of the dynamics of frictional processes was evaluated using methods of vibration diagnostics and analysis of acoustic emission signals. Assessment of the dynamics of the tribosystem was carried out by determining the amplitude of vibration accelerations in the direction of action of the friction force and normal pressure. The changes in median frequency and AE energy were considered as informative parameters.

引用

页数：4

共 29 条

[21] Influence of roughness parameters and surface texture on friction during sliding of pure lead over 080 M40 steel
Pradeep L. Menezes
Satish V. Kishore
The International Journal of Advanced Manufacturing Technology, 2009, 43 : 731 - 743
[22] Influence of roughness parameters and surface texture on friction during sliding of pure lead over 080 M40 steel
Menezes, Pradeep L.
Kishore
Kailas, Satish V.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2009, 43 (7-8): : 731 - 743
[23] EFFECT OF TESTING ENVIRONMENTS ON FRICTION AND BIDIRECTIONAL MATERIAL TRANSFER DURING DRY SLIDING OF 3004-ALUMINUM AGAINST H13 STEEL
GRAVIER, NP
CUTIONGCO, EC
CHUNG, YW
TRIBOLOGY TRANSACTIONS, 1995, 38 (01): : 168 - 172
[24] Effect of stroke length on friction and wear of self-lubricating polymer composites during dry sliding against stainless steel at high contact pressures
Rodiouchkina, Maria
Lindsjo, Henrik
Berglund, Kim
Hardell, Jens
WEAR, 2022, 502
[25] Steady-state dynamics and discontinuity-induced sliding bifurcation of a multi-module piecewise-smooth vibration-driven system with dry friction
Fang, Hongbin
Zhao, Yuyang
Xu, Jian
COMMUNICATIONS IN NONLINEAR SCIENCE AND NUMERICAL SIMULATION, 2022, 114
[26] Influence of Different Mouth Rinsing Agents on Friction During Sliding Mechanics Between Orthodontic Metal Brackets and Stainless Steel Archwire: A Comparative In Vitro Study
Himabindu, Datla
Prasanna, Pappala Venkata
Reddy, Vazrala Vamsi Krishna
Farhatulla, Shaik
Ram, R. S. V. M. Raghu
CUREUS JOURNAL OF MEDICAL SCIENCE, 2023, 15 (06)
[27] Influence of unforced dewetting and enforced wetting on real contact formation and friction behavior between rubber hemisphere and glass plate during contacting and sliding processes
Nishi, Toshiaki
Yamaguchi, Takeshi
Shibata, Kei
Hokkirigawa, Kazuo
TRIBOLOGY INTERNATIONAL, 2020, 141
[28] Influence of V concentration in TiAlSiVN coating on self-lubrication, friction and tool wear during two-pass dry turning of austenitic steel 316 L
Kumar, Ch Sateesh
Urbikain, Gorka
Fernandes, Filipe
Rjoub, Abbas A. L.
De Lacalle, Luis Norberto Lopez
TRIBOLOGY INTERNATIONAL, 2024, 193
[29] Influence of surface texture on coefficient of friction and transfer layer formation during sliding of pure magnesium pin on 080 M40 (EN8) steel plate
Menezes, Pradeep L.
Kishore
Kailas, Satish V.
WEAR, 2006, 261 (5-6) : 578 - 591

← 1 2 3 →