Effect of Sintering Temperature on Microstructure and Mechanical Properties of Al2O3/TiAl In Situ Composites

被引：0
|
作者：
Xiang, Liuyi [1 ]
Wang, Fen [1 ]
Zhu, Jianfeng [1 ]
Wang, Xiaofeng [1 ]
机构：
[1] Shaanxi Univ Sci & Technol, Minist Educ, Key Lab Auxiliary Chem & Technol Chem Ind, Xian 710021, Peoples R China
来源：
ECO-MATERIALS PROCESSING AND DESIGN XII | 2011年 / 695卷
关键词：
Al2O3/TiAl composites; sintering temperature; Microstructure; Mechanical properties; TIAL-TI5SI3; ALLOYS;
D O I：
10.4028/www.scientific.net/MSF.695.227
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Al2O3/TiAl composites were successfully fabricated by hot-press-assisted exothermic dispersion method with powder mixtures of Ti, Al, TiO2 and Cr2O3 as raw materials. The effect of sintering temperature on the microstructures and mechanical properties of Al2O3/TiAl composites has been investigated. The results show that the Rockwell hardness and density of the composites increased with increasing sintering temperature. But the flexural strength and fracture toughness peaked at 825 MPa and 7.29 MPa.m(1/2), respectively, when the sintering temperature reached to 1300 degrees C.
引用
收藏
页码：227 / 230
页数：4
相关论文
共 50 条
  • [41] Microstructure and mechanical properties of Al2O3/ZrO2 composites by two-step sintering
    Ojaimi, Christiane L.
    Ferreira, Julieta A.
    Chinelatto, Adilson L.
    Salem, Raphael E. P.
    Chinelatto, Adriana S. A.
    Pallone, Eliria M. J. A.
    INTERNATIONAL JOURNAL OF APPLIED CERAMIC TECHNOLOGY, 2020, 17 (04) : 1619 - 1628
  • [42] A novel in-situ exothermic assisted sintering high entropy Al2O3/(NbTaMoW)C composites: Microstructure and mechanical properties
    Liu, Diqiang
    Zhang, Aijun
    Jia, Jiangang
    Han, Jiesheng
    Zhang, Junyan
    Meng, Junhu
    COMPOSITES PART B-ENGINEERING, 2021, 212
  • [43] INFLUENCE OF SINTERING AIDS ON SINTERING, MICROSTRUCTURE AND MECHANICAL-PROPERTIES OF AL2O3 CERAMICS
    WINKELMANN, K
    GOBEL, O
    NIKKILA, AP
    VUORINEN, P
    MANTYLA, T
    ZSCHECH, E
    METALL, 1994, 48 (05): : 382 - 387
  • [44] EFFECT OF MICROSTRUCTURE ON CYCLIC FATIGUE PROPERTIES OF AL2O3 CERAMICS AND AL2O3 COMPOSITES
    KAMIYA, H
    TAKATSU, M
    OHYA, K
    ANDO, M
    HATTORI, A
    NIPPON SERAMIKKUSU KYOKAI GAKUJUTSU RONBUNSHI-JOURNAL OF THE CERAMIC SOCIETY OF JAPAN, 1990, 98 (05): : 456 - 463
  • [45] Sintering, microstructure, and mechanical properties of ZrO2-doped Al2O3
    Baruah, Biswajit
    Anand, Rahul
    Behera, Shantanu K.
    ADVANCES IN APPLIED CERAMICS, 2023, 122 (5-8) : 311 - 321
  • [46] Microstructure and mechanical properties of Al2O3-TiC/Al in situ composites
    Chen, Hongmei
    Yu, Huashun
    Zhang, Jing
    Zhang, Lin
    Min, Guanghui
    Experimental Mechanics in Nano and Biotechnology, Pts 1 and 2, 2006, 326-328 : 1857 - 1860
  • [47] Effect of MoO3 on microstructure and mechanical properties of (Ti,Mo)Al/Al2O3 composites by in situ reactive hot pressing
    Wang, Fen
    Zhao, Yuanbo
    Yang, Chenhui
    Fan, Ningxia
    Zhu, Jianfeng
    CERAMICS INTERNATIONAL, 2016, 42 (01) : 1 - 8
  • [48] Effect of different forms of silica on sintering, microstructure and properties of borosilicate glass/Al2O3 composites
    Ming Liu
    Hongqing Zhou
    Haikui Zhu
    Zhenxing Yue
    Jianxin Zhao
    Journal of Wuhan University of Technology-Mater. Sci. Ed., 2014, 29 : 58 - 64
  • [49] Effect of Different Forms of Silica on Sintering, Microstructure and Properties of Borosilicate Glass/Al2O3 Composites
    刘明
    ZHOU Hongqing
    ZHU Haikui
    YUE Zhenxing
    ZHAO Jianxin
    Journal of Wuhan University of Technology(Materials Science), 2014, 29 (01) : 58 - 64
  • [50] Effect of different forms of silica on sintering, microstructure and properties of borosilicate glass/Al2O3 composites
    Liu Ming
    Zhou Hongqing
    Zhu Haikui
    Yue Zhenxing
    Zhao Jianxin
    JOURNAL OF WUHAN UNIVERSITY OF TECHNOLOGY-MATERIALS SCIENCE EDITION, 2014, 29 (01): : 58 - 64
12345