Strength and stability criteria for thin-walled stainless steel circular hollow section members under bending

被引：39
|
作者：
Kiymaz, G [1 ]
机构：
[1] Istanbul Kultur Univ, Dept Civil Engn, Fac Engn & Architecture, TR-34191 Istanbul, Turkey
来源：
THIN-WALLED STRUCTURES | 2005年 / 43卷 / 10期
关键词：
stainless steel; circular hollow sections; bending resistance; slenderness limit;
D O I：
10.1016/j.tws.2005.06.006
中图分类号：
TU [建筑科学];
学科分类号：
0813 ;
摘要：
A series of tests consisting of various cross-section geometries were performed on structural stainless steel circular hollow sections (CHS) subjected to bending. The test program comprised a total of eight tests on CHS in two grades of stainless steel, namely 304 and Duplex 2205. For each grade four sections, each with a different slenderness, were tested, in order to cover a range of structural responses. Measurements of overall geometric imperfections and material properties were conducted. The test strengths are compared with the strengths predicted using the American, Australian and European specifications for cold-formed stainless steel structures. In the light of the test results and code recommendations, strength and cross-section classification criteria for stainless steel circular hollow section members in bending are examined. (c) 2005 Elsevier Ltd. All rights reserved.
引用
收藏
页码：1534 / 1549
页数：16
相关论文
共 50 条
  • [41] IMPACT STRENGTH OF THIN-WALLED COMPOSITE STRUCTURES UNDER COMBINED BENDING AND TORSION
    MIZUKAWA, K
    FUJII, T
    ITAMI, K
    OSAKA, K
    COMPOSITE STRUCTURES, 1985, 4 (02) : 179 - 192
  • [42] THE BENDING STABILITY OF THIN-WALLED UNSTIFFENED CIRCULAR CYLINDERS INCLUDING THE EFFECTS OF INTERNAL PRESSURE
    SUER, HS
    HARRIS, LA
    SKENE, WT
    BENJAMIN, RJ
    JOURNAL OF THE AERONAUTICAL SCIENCES, 1958, 25 (05): : 281 - 287
  • [43] Welding Defect Analysis In Thin-Walled Steel Tube Under Bending Moment
    Geng, Jinfeng
    Cai, Hongsheng
    Liang, Xingpei
    Wang, Hui
    Wang, Yujie
    Wang, Zhaohua
    ADVANCES IN STRUCTURAL ENGINEERING, PTS 1-3, 2011, 94-96 : 1711 - +
  • [44] ANALYTICAL METHOD FOR THIN-WALLED MEMBERS IN GENERAL BENDING AND TORSION
    CHEUNG, YK
    KOO, KK
    THIN-WALLED STRUCTURES, 1988, 6 (05) : 355 - 369
  • [45] Advances in direct strength design of thin-walled members
    Schafer, BW
    ADVANCES IN STRUCTURES, VOLS 1 AND 2, 2003, : 333 - 339
  • [46] POST-BUCKLING STRENGTH OF THIN-WALLED MEMBERS
    LEE, HP
    HARRIS, PJ
    COMPUTERS & STRUCTURES, 1979, 10 (04) : 689 - 702
  • [47] Plastic mechanisms database for thin-walled cold-formed steel members in compression and bending
    Ungureanu, V.
    Kotelko, M.
    Mania, R. J.
    Dubin, D.
    THIN-WALLED STRUCTURES, 2010, 48 (10-11) : 818 - 826
  • [48] Strength of steel thin-walled box columns
    Tongji Daxue Xuebao, 3 (268-273):
  • [49] Investigation of fatigue strength under wide-ranged biaxial stress for two types of stainless steel using a thin-walled hollow cylinder specimen
    Saito, Shunsuke
    Ogawa, Fumio
    Itoh, Takamoto
    INTERNATIONAL JOURNAL OF FATIGUE, 2020, 136 (136)
  • [50] DYNAMIC STABILITY OF THIN-WALLED STRUCTURAL MEMBERS UNDER PERIODIC AXIAL TORQUE
    AIDA, T
    JOURNAL OF ENGINEERING MECHANICS-ASCE, 1989, 115 (01): : 71 - 88
12345