Forming characteristics of cast magnesium alloy sheets manufactured by roll strip casting process

被引：2

作者：

Watari, H

Paisarn, R

Koga, N

Haga, T

Davey, K

Rasgado, MTA

机构：

[1] Oyama Natl Coll Technol, Oyama 3230806, Japan

[2] Nippon Inst Technol, Miyashiro, Saitama 345850, Japan

[3] Osaka Inst Technol, Asahi Ku, Osaka 5358585, Japan

[4] Univ Manchester, Manchester M60 1QD, Lancs, England

来源：

ADVANCES IN ENGINEERING PLASTICITY AND ITS APPLICATIONS, PTS 1 AND 2 | 2004年 / 274-276卷

关键词：

magnesium alloys; semi-solid strip casting; twin roll caster; warm deep-drawability;

D O I：

10.4028/www.scientific.net/KEM.274-276.379

中图分类号：

TQ174 [陶瓷工业]; TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

Plastic formability of cast magnesium alloy that were hot rolled after roll strip casting was investigated to ascertain the feasibility of semi-solid strip casting process of AD I B magnesium alloy. Hot rolling and heat treatment conditions were changed to examine which conditions were appropriate for producing AD I B wrought magnesium alloys after strip casting process. Microscopic observation of the crystals. of the manufactured wrought magnesium alloys was performed. It has been found that a limiting drawing ratio of 2.7 was possible in a warm deep drawing test of the cast magnesium alloy sheets after being hot rolled.

引用

页码：379 / 384

页数：6

共 50 条

[31] The effect of casting parameters on twin roll cast strip microstructure
Ertan, S
Dundar, M
Birol, Y
Sarioglu, K
Ozden, E
Akkurt, AS
Yildizbayrak, G
Hamer, S
Romanowski, C
LIGHT METALS 2000, 2000, : 667 - 672
[32] Effect of Magnetostatic Field on Microstructure of 7075 Aluminum Alloy strip manufactured by Twin-Roll Casting
Su, Xin
Xu, G. M.
Feng, Y. H.
ADVANCES IN MATERIALS AND MATERIALS PROCESSING, PTS 1-3, 2013, 652-654 : 2427 - +
[33] Coupled analysis of temperature and flow during twin-roll casting of magnesium alloy strip
Zhao, Hu
Li, Peijie
He, Liangju
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2011, 211 (06) : 1197 - 1202
[34] Numerical Simulation of Semi-solid Roll Strip-casting Process for AZ91D Magnesium Alloy
Du, Zhiming
Xie, Shuisheng
Wu, Ping
Zhang, Yanying
SEMI-SOLID PROCESSING OF ALLOYS AND COMPOSITES X, 2008, 141-143 : 617 - +
[35] Fractal Analysis of Solidification Microstructure of High Carbon High Alloy Cast Roll Manufactured by Centrifugal Casting
Yamamoto, Masahiro
Narita, Ichihito
Miyahara, Hirofumi
TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 2013, 99 (02): : 72 - 79
[36] Fabrication of high Mg containing Al-Mg alloy sheets by twin roll strip casting
Kim, H. W.
Lim, C. Y.
Kang, S. B.
ADVANCED MATERIALS AND PROCESSING IV, 2007, 29-30 : 83 - 86
[37] Mechanical and Microstructure Characterisation of the Hypoeutectic Cast Aluminium Alloy AlSi10Mg Manufactured by the Twin-Roll Casting Process
Neuser, Moritz
Schaper, Mirko
Grydin, Olexandr
JOURNAL OF MANUFACTURING AND MATERIALS PROCESSING, 2023, 7 (04):
[38] Roll Casting of Net Inserted Aluminum Alloy Strip
Toshio Haga
Kenta Takahashi
Ryoji Nakamura
Hisaki Watari
International Journal of Material Forming, 2010, 3 : 1063 - 1066
[39] Roll casting of wire inserted aluminum alloy strip
Haga, T.
Takahashi, K.
Inui, H.
Sakaguchi, H.
Watari, H.
Kumai, S.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2007, 187 : 508 - 511
[40] High speed roll casting of aluminum alloy strip
Haga, T
Watari, H
Kumai, S
PRICM 5: THE FIFTH PACIFIC RIM INTERNATIONAL CONFERENCE ON ADVANCED MATERIALS AND PROCESSING, PTS 1-5, 2005, 475-479 : 343 - 348

← 1 2 3 4 5 →