Stator winding leakage inductances determination using finite elements method

被引：0

作者：

Chiver, O. ^{[1
]}

Micu, E. ^{[2
]}

Barz, C. ^{[1
]}

机构：

[1] N Univ Baia Mare, Dept Elect Engn, Baia Mare, Romania

[2] Transilvania Univ Brasov, Dept Automat, Brasov, Romania

来源：

PROCEEDINGS OF THE 11TH INTERNATIONAL CONFERENCE ON OPTIMIZATION OF ELECTRICAL AND ELECTRONIC EQUIPMENT, VOL II A AND B | 2008年

关键词：

D O I：

暂无

中图分类号：

TP301 [理论、方法];

学科分类号：

081202 ;

摘要：

This paper presents a new method to establish the leakage inductances of AC machine stator winding using a numerical analyzing program based on the finite elements method. The 3D numerical analysis is used to determine the end winding leakage inductance. In order to eliminate the magnetic flux present in the space normally occupied by the rotor, when the rotor is removed, the air from the rotor space is replaced with a very low relative magnetic permeability (10(-6)) material. The results obtained are compared to those obtained by another method of numerical analysis, and with those calculated analytically. For one of the models, the results are compared to the results obtained experimentally as well.

引用

页码：69 / +

页数：2

共 50 条

[41] Determination of control winding current and stator frequency for dual stator-winding high-speed induction generator
Wu, Xin-Zhen
Wang, Xiang-Heng
Zhongguo Dianji Gongcheng Xuebao/Proceedings of the Chinese Society of Electrical Engineering, 2007, 27 (18): : 23 - 29
[42] Calculation and Analysis of Stator End-Winding Leakage Inductance of an Induction Machine
Lin, Ranran
Arkkio, Antero
IEEE TRANSACTIONS ON MAGNETICS, 2009, 45 (04) : 2009 - 2014
[43] Research on calculation of leakage reactance of dual stator-winding induction generator
Aero-Power Sci-Tech Center, Nanjing University of Aeronautics and Astronautics, Nanjing 210016, China
不详
Hangkong Xuebao, 2006, 1 (109-114):
[44] Calculation of end-turn leakage inductances of electrical machines using the edge element method
Demenko, A
Nowak, L
Pietrowski, W
COMPEL-THE INTERNATIONAL JOURNAL FOR COMPUTATION AND MATHEMATICS IN ELECTRICAL AND ELECTRONIC ENGINEERING, 2001, 20 (01) : 132 - 139
[45] Contribution to the Determination of the Stator Leakage Reactance of Synchronous Generators
De Greve, Zacharie
Delhaye, Marc
Lossa, Geoffrey
Deblecker, Olivier
Lobry, Jacques
Vallee, Francois
2013 IEEE INTERNATIONAL CONFERENCE ON INDUSTRIAL TECHNOLOGY (ICIT), 2013, : 284 - 289
[46] A computationally efficient winding function method for calculation of inductances in an asymmetric induction motor
Mishra, Chandrabhanu
Routray, Aurobinda
Mukhopadhyay, Siddhartha
ELECTRIC POWER COMPONENTS AND SYSTEMS, 2007, 35 (01) : 43 - 61
[47] Analysis of Stator Leakage Reactance Computation with finite element methods
Ducreux, Jean-Pierre
Roger, Jean-Yves
2015 IEEE INTERNATIONAL ELECTRIC MACHINES & DRIVES CONFERENCE (IEMDC), 2015, : 115 - 120
[48] Determination of Stresses and Forces on the Orthodontic System by Using Numerical Simulation of the Finite Elements Method
Fercec, J.
Glisic, B.
Scepan, I.
Markovic, E.
Stamenkovic, D.
Anzel, I.
Flasker, J.
Rudolf, R.
ACTA PHYSICA POLONICA A, 2012, 122 (04) : 659 - 665
[49] Numerical Calculation of Stator End Leakage Reactance of Permanent Magnet Machines with Concentric Winding
Zheng, Xiaoqin
Zhang, Wen
Wu, Xinzhen
Ni, Ronggang
JOURNAL OF MAGNETICS, 2019, 24 (01) : 184 - 189
[50] A novel stator winding capacitance dividing method for the generator with considerable winding distributed capacitance
Tao, Yonghong
Tian, Qing
Lin, Xiangning
2007 IEEE POWER ENGINEERING SOCIETY GENERAL MEETING, VOLS 1-10, 2007, : 1956 - 1961

← 1 2 3 4 5 →