An unsymmetric end-notched flexure test for interfacial fracture toughness determination

被引：39
|
作者：
Sundararaman, V [1 ]
Davidson, BD
机构：
[1] Georgia Inst Technol, George W Woodruff Sch Mech Engn, Atlanta, GA 30332 USA
[2] Syracuse Univ, Dept Mech Aerosp & Mfg Engn, Syracuse, NY 13244 USA
来源：
ENGINEERING FRACTURE MECHANICS | 1998年 / 60卷 / 03期
基金：
美国国家科学基金会;
关键词：
bimaterial interfaces; energy release rate; fracture mode mixity; crack tip element; finite element;
D O I：
10.1016/S0013-7944(98)00017-4
中图分类号：
O3 [力学];
学科分类号：
08 ; 0801 ;
摘要：
An unsymmetric end-notched flexure test is described and its suitability for interfacial fracture toughness testing is evaluated. The test specimen consists of a beam-type geometry that is comprised of two materials, one "top" and one "bottom", with a crack at one end along the bimaterial interface. The specimen is loaded in three-point bending: similar to a conventional end-notched flexure test. A plate theory analysis, modified to include the effects of transverse shear deformation in the near tip region, is used to determine the force and moment resultants in the specimen as well as its deformed shape. Results from this analysis are incorporated into a crack tip element approach to predict energy release rate and mode mixity. These analytical predictions are verified by comparison to finite element results. It is shown that, by varying the relative thicknesses and locations of the two materials, the unsymmetric end-notched flexure test can be used to determine the fracture toughness over a reasonably wide range of mode mixities for most bimaterial interfaces. (C) 1998 Els-vier Science Ltd. All rights reserved.
引用
收藏
页码：361 / 377
页数：17
相关论文
共 50 条
  • [21] Bone fracture characterization using the end notched flexure test
    Dourado, N.
    Pereira, F. A. M.
    de Moura, M. F. S. F.
    Morais, J. J. L.
    Dias, M. I. R.
    MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS, 2013, 33 (01): : 405 - 410
  • [22] Mode II fracture of wood: Comparison between End-Notched Flexure and Compact Shear testing
    Reiner, Johannes
    Wood, Jake
    Subhani, Mahbube
    ENGINEERING FRACTURE MECHANICS, 2022, 270
  • [23] Mode II fatigue delamination of carbon/epoxy laminates using the end-notched flexure test
    Sousa, J. A.
    Pereira, A. B.
    Martins, A. P.
    de Morais, A. B.
    COMPOSITE STRUCTURES, 2015, 134 : 506 - 512
  • [24] Mode II fracture mechanics properties of solid wood measured by the three-point eccentric end-notched flexure test
    Yoshihara, Hiroshi
    ENGINEERING FRACTURE MECHANICS, 2015, 141 : 140 - 151
  • [25] Mode II fracture characterisation of a honeycomb/carbon-epoxy sandwich panel using the asymmetric end-notched flexure test
    Moreira, R. D. F.
    de Moura, M. F. S. F.
    Rocha, R. J. B.
    Oliveira, C. F. M.
    JOURNAL OF SANDWICH STRUCTURES & MATERIALS, 2022, 24 (07) : 2030 - 2046
  • [26] A new method for determining mode II R-curve by the End-Notched Flexure test
    Arrese, A.
    Carbajal, N.
    Vargas, G.
    Mujika, F.
    ENGINEERING FRACTURE MECHANICS, 2010, 77 (01) : 51 - 70
  • [27] Numerical evaluation of the direct method for cohesive law extraction in shear by the End-Notched Flexure test
    Fernandes, R. L.
    Campilho, R. D. S. G.
    Leitao, A. C. C.
    Azevedo, J. C. S.
    ICSI 2015 THE 1ST INTERNATIONAL CONFERENCE ON STRUCTURAL INTEGRITY FUNCHAL, 2015, 114 : 94 - 101
  • [28] Analysis of the fracture process zone and effective crack length in the adhesively bonded end-notched flexure specimen
    de Morais, A. B.
    JOURNAL OF ADHESION, 2019, 95 (08): : 770 - 795
  • [29] An end-notched beam test for specific fracture energy in mixed mode in timber
    Mansfield-Williams, HD
    MATERIALS AND STRUCTURES, 2001, 34 (238) : 224 - 227
  • [30] An end-notched beam test for specific fracture energy in mixed mode in timber
    H. D. Mansfield-Williams
    Materials and Structures, 2001, 34 : 224 - 227
12345