Electrical, thermal and mechanical properties of iodine-doped highly elongated ultrahigh molecular weight polyethylene films filled with multiwalled carbon nanotubes

被引:0
|
作者
Yuezhen, Bin [1 ]
Qingyun, Chen [1 ]
Tashiro, Kohji [1 ]
Matsuo, Masaru [1 ]
机构
[1] Nara Womens Univ, Grad Sch Humanities & Sci, Nara 6308263, Japan
关键词
ultrahigh molecular weight polyethylene; multiwalled carbon nanotubes; electrical conductivity; mechanical property;
D O I
暂无
中图分类号
TB3 [工程材料学]; TS1 [纺织工业、染整工业];
学科分类号
0805 ; 080502 ; 0821 ;
摘要
Highly elongated ultrahigh molecular weight polyethylene (UHMWPE) films filled with multiwalled carbon nanatubes (MWNTs) prepared by gelation/crystallization from solution, were doped by iodine. The electrical conductivity of iodine-doped MWNTs-UHMWPE film was about two to four orders of magnitude higher than that of original films, and the conductivity became stable and orderly in the temperature range of 25 degrees C to 150 degrees C after iodine-doping. Raman spectrum results indicated that the doped iodine as (I-5(-)) existed in the drawn MWNTs-UHMWPE film, which leaded to an increase in the electrical conductivity. The iodine-doping caused the decrease in the crystallinity of UHMWPE, which is confirmed by differential scanning calorimetry. The storage modulus of the doped film was still kept as high as that of the original film. At the room temperature, the storage modulus of the iodine-doped film reached 42GPa.
引用
收藏
页码:557 / 564
页数:8
相关论文
共 50 条
  • [21] Electrical and thermal properties of PEDOT:PSS films doped with carbon nanotubes
    Park, Jongwoon
    Lee, Ari
    Yim, Younchan
    Han, Eunmi
    SYNTHETIC METALS, 2011, 161 (5-6) : 523 - 527
  • [22] Study on Preparation and Properties of Ultrahigh Molecular Weight Polyethylene Composites Filled with Different Carbon Materials
    Zhao, Yuantao
    Jiang, Tao
    Wang, Ying
    Wu, Xinfeng
    Jiang, Pingkai
    Shi, Shanshan
    Sun, Kai
    Tang, Bo
    Li, Wenge
    Yu, Jinhong
    ACS OMEGA, 2022, 7 (06): : 5547 - 5557
  • [23] Thermal and mechanical properties of ultrahigh molecular weight polyethylene/high-density polyethylene/polyethylene glycol blends
    Ahmad, Mazatusziha
    Wahit, Mat Uzir
    Kadir, Mohammed Rafiq Abdul
    Dahlan, Khairul Zaman Mohd
    Jawaid, Mohammad
    JOURNAL OF POLYMER ENGINEERING, 2013, 33 (07) : 599 - 614
  • [24] Mechanical properties of carbon nanotubes reinforced ultra high molecular weight polyethylene
    Della, Christian N.
    Shu, Dongwei
    ADVANCED STRUCTURAL AND FUNCTIONAL MATERIALS FOR PROTECTION, 2008, 136 : 45 - 49
  • [25] Influence of the Compaction Temperature on the Electrical and Mechanical Properties of the Segregated Conductive Ultrahigh Molecular Weight Polyethylene/Carbon Nanotube Composite
    Pang, Huan
    Bao, Yu
    Chen, Chen
    Lei, Jun
    Ji, Xu
    Chen, Jun
    Li, Zong-Ming
    POLYMER-PLASTICS TECHNOLOGY AND ENGINEERING, 2012, 51 (15) : 1530 - 1536
  • [26] Electrical and mechanical properties of carbon nanotube/ultrahigh-molecular-weight polyethylene composites prepared by a filler prelocalization method
    Mierczynska, A.
    Mayne-L'Hermite, M.
    Boiteux, G.
    Jeszka, J. K.
    JOURNAL OF APPLIED POLYMER SCIENCE, 2007, 105 (01) : 158 - 168
  • [27] Silver coated and filled carbon nanotubes: Synthesis, electrical and thermal properties, and iodine vapor sensing
    Kumar, Robin
    Mittal, Jagjiwan
    Jaiswal, Monica
    DIAMOND AND RELATED MATERIALS, 2021, 120
  • [28] Electrical properties and EMI shielding characteristics of multiwalled carbon nanotubes filled carbon black-high density polyethylene nanocomposites
    Dinesh, P.
    Renukappa, N. M.
    Siddaramaiah
    Rajan, J. Sundara
    COMPOSITE INTERFACES, 2012, 19 (02) : 121 - 133
  • [29] Wear resistance and mechanical properties of highly cross-linked, ultrahigh-molecular weight polyethylene doped with vitamin E
    Oral, Ebru
    Christensen, Steven D.
    Malhi, Arnaz S.
    Wannomae, Keith K.
    Muratoglu, Orhun K.
    JOURNAL OF ARTHROPLASTY, 2006, 21 (04): : 580 - 591
  • [30] MOLECULAR-WEIGHT DEPENDENCE OF MORPHOLOGY AND MECHANICAL-PROPERTIES OF ULTRAHIGH-MOLECULAR-WEIGHT POLYETHYLENE GEL FILMS
    OGITA, T
    YAMAMOTO, R
    SUZUKI, N
    OZAKI, F
    MATSUO, M
    POLYMER, 1991, 32 (05) : 822 - 834