Experimental research on aluminum alloy blade's surface roughness of integrate rotor based on four-axis high speed milling

被引：2
|
作者：
Bu, Guangbin [1 ]
Zhao, Can [2 ]
Zuo, Dunwen [1 ]
机构：
[1] Nanjing Univ Aeronaut & Astronaut, Coll Mech & Elect Engn, Nanjing 210016, Peoples R China
[2] Heilongiang Inst Sci Technol, modern Manufacture Engn Ctr, Harbin 150027, Peoples R China
来源：
ADVANCES IN MACHINING AND MANUFACTURING TECHNOLOGY IX | 2008年 / 375-376卷
关键词：
aluminum alloy; high speed milling; surface roughness; cutting speed; feed;
D O I：
10.4028/www.scientific.net/KEM.375-376.390
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
It was carried out that a HSM test for aluminum alloy (2A70) rotor with carbide cutter. It was investigated and analyzed that the influence of different cutting speed and feed speed on the roughness of blade's finished surface. The experiment showed that high quality surface was easy to obtain by increasing the cutting speed and decreasing the feed. But when the cutting speed crossed the critical value, increase in the cutting speed caused slight decrease in the surface roughness. The feed decreased to a very small value, the roughness increased a little. It was expected that best surface roughness and machining efficiency could be obtained by selecting the appropriate cutting speed and feed.
引用
收藏
页码：390 / +
页数：2
相关论文
共 50 条
  • [41] Experimental research on surface quality in the process of high-speed and micro-scale milling
    Zhang, J. (haifeng246@163.com), 1600, Chinese Mechanical Engineering Society (49):
  • [42] Experimental Research on Process Optimization for High-Speed Friction Stir Welding of Aluminum Alloy
    Jia, Hepeng
    Wu, Kai
    Sun, Yu
    Hu, Fengfeng
    JOM, 2023, 75 (03) : 941 - 953
  • [43] Experimental Research on Process Optimization for High-Speed Friction Stir Welding of Aluminum Alloy
    Hepeng Jia
    Kai Wu
    Yu Sun
    Fengfeng Hu
    JOM, 2023, 75 : 941 - 953
  • [44] Experimental Investigation and Estimation of Surface Roughness using ANN, GMDH & MRA models in High Speed Micro End Milling of Titanium Alloy (Grade-5)
    Bandapalli, Chakradhar
    Sutaria, Bharatkumar Mohanbhai
    Bhatt, Dhananjay Vishnuprasad
    Singh, Kundan Kumar
    MATERIALS TODAY-PROCEEDINGS, 2017, 4 (02) : 1019 - 1028
  • [45] Experiment Research of Cutter Edge and Cutting Parameters Influence on Machined Surface Roughness for High Speed Milling Hardened Steel
    Zhang Wei
    Zheng Minli
    Cheng Mingming
    Wan Quan
    FRONTIER IN FUNCTIONAL MANUFACTURING TECHNOLOGIES, 2010, 136 : 86 - 90
  • [46] An Experimental Investigation of Residual Stresses in High-Speed End Milling 7050-T7451 Aluminum Alloy
    Huang, Xiaoming
    Sun, Jie
    Li, Jianfeng
    Han, Xiong
    Xiong, Qingchun
    ADVANCES IN MECHANICAL ENGINEERING, 2013,
  • [47] Chip morphology and surface roughness in high-speed milling of nickel-based superalloy Inconel 718
    Ning, Fuda
    Wang, Fuji
    Jia, Zhenyuan
    Ma, Jianwei
    International Journal of Machining and Machinability of Materials, 2014, 15 (3-4) : 285 - 299
  • [48] An Effective PSO-LSSVM-Based Approach for Surface Roughness Prediction in High-Speed Precision Milling
    Li, Bo
    Tian, Xitian
    IEEE ACCESS, 2021, 9 : 80006 - 80014
  • [49] Research on Surface Quality of Titanium Alloy Webs via High-speed Ultrasonic Elliptical Vibration Milling
    Gao Z.
    Zhang D.
    Li Z.
    Jiang X.
    Liu J.
    Jixie Gongcheng Xuebao/Journal of Mechanical Engineering, 2019, 55 (07): : 249 - 256
  • [50] Experimental investigation of cutting force, surface roughness and tool wear in high-speed dry milling of AISI 4340 steel
    Zheng, Guangming
    Cheng, Xiang
    Li, Li
    Xu, Rufeng
    Tian, Yebing
    JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, 2019, 33 (01) : 341 - 349
12345