Effect of machining-induced surface residual stress on initiation of stress corrosion cracking in 316 austenitic stainless steel

被引：120

作者：

Zhang, Wenqian ^{[1
]}

Fang, Kewei ^{[2
]}

Hu, Yujin ^{[1
]}

Wang, Siyang ^{[1
]}

Wang, Xuelin ^{[1
]}

机构：

[1] Huazhong Univ Sci & Technol, Sch Mech Sci & Engn, State Key Lab Digital Mfg Equipment & Technol, Wuhan 430074, Peoples R China

[2] Suzhou Nucl Power Res Inst, Suzhou 215004, Peoples R China

来源：

CORROSION SCIENCE | 2016年 / 108卷

基金：

中国国家自然科学基金;

关键词：

Stainless steel; Stress corrosion; CHLORIDE SOLUTION; HIGH-TEMPERATURE; PIPELINE STEELS; PART; BEHAVIOR; RESISTANCE; WATER; MICROSTRUCTURE; SUSCEPTIBILITY; PROPAGATION;

D O I：

10.1016/j.corsci.2016.03.008

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

The effect of machining-induced surface residual stress on the stress corrosion cracking (SCC) initiation in 316 stainless steel was investigated in boiling magnesium chloride solution. The crack density was used to evaluate the SCC initiation and propagation at different residual stress levels. The results showed a strong correlation between the residual stress and the resultant micro-crack density. When the residual stress reached a critical value, the micro-crack density increased significantly in the very early phase, and the critical stress is 190 MPa for 316 stainless steel. Additionally, the cracking behavior could be correlated with the machining effects on the surface layer. (C) 2016 Elsevier Ltd. All rights reserved.

引用

页码：173 / 184

页数：12

共 50 条

[31] STRESS CORROSION CRACKING OF WELDED AUSTENITIC STAINLESS STEEL.
Gooch, T.G.
Welding in the World, Le Soudage Dans Le Monde, 1984, 22 (3-4): : 64 - 77
[32] EFFECT OF TIC ON THE STRESS-CORROSION CRACKING OF AUSTENITIC STAINLESS-STEEL
TSAI, WT
LIAW, CM
LEE, JT
MATERIALS CHARACTERIZATION, 1990, 24 (02) : 199 - 204
[33] STRESS CORROSION CRACKING OF AUSTENITIC STAINLESS STEEL UNDER COMPRESSIVE STRESS.
Yao, Jing
Chu, Wuyang
Xiao, Jimei
Jinshu Xuebao/Acta Metallurgica Sinica, 1983, 19 (05):
[34] Combined effects of machining-induced residual stress and external load on SCC initiation and early propagation of 316 stainless steel in high temperature high pressure water
Zhang, Wenqian
Wang, Xuelin
Wang, Siyang
Wu, Huanchun
Yang, Chongwen
Hu, Yujin
Fang, Kewei
Jiang, Hui
Corrosion Science, 2021, 190
[35] MODELING OF HARDNESS AND WELDING RESIDUAL STRESS IN TYPE 316 STAINLESS STEEL COMPONENTS FOR THE ASSESSMENT OF STRESS CORROSION CRACKING
Li, Suo
Yamaguchi, Yoshihito
Katsuyama, Jinya
Li, Yinsheng
Deng, Dean
PROCEEDINGS OF ASME 2023 PRESSURE VESSELS & PIPING CONFERENCE, PVP2023, VOL 5, 2023,
[36] Combined effects of machining-induced residual stress and external load on SCC initiation and early propagation of 316 stainless steel in high temperature high pressure water
Zhang, Wenqian
Wang, Xuelin
Wang, Siyang
Wu, Huanchun
Yang, Chongwen
Hu, Yujin
Fang, Kewei
Jiang, Hui
CORROSION SCIENCE, 2021, 190
[37] Study on mechanism of intergranular stress corrosion cracking and analysis of residual stress and work hardening in welds of low-carbon austenitic stainless steel with hard surface machining
Division of Materials and Manufacturing Science, Graduate School of Engineering, Osaka University, 2-1 Yamadaoka, Suita, 565-0871, Japan
不详
Zairyo Kankyo, 2007, 12 (568-576):
[38] EFFECTS OF GRAIN BOUNDARY CHARACTER ON INTERGRANULAR STRESS CORROSION CRACKING INITIATION IN 316 STAINLESS STEEL
Zhang Zilong
Xia Shuang
Cao Wei
Li Hui
Zhou Bangxin
Bai Qin
ACTA METALLURGICA SINICA, 2016, 52 (03) : 313 - 319
[39] Oxide-induced initiation of stress corrosion cracking in irradiated stainless steel
Cookson, JM
Was, GS
Andresen, PL
CORROSION, 1998, 54 (04) : 299 - 312
[40] Effect of surface machining on the corrosion behaviour of 316 austenitic stainless steel in simulated PWR water
Wang, Siyang
Hu, Yujin
Fang, Kewei
Zhang, Wenqian
Wang, Xuelin
CORROSION SCIENCE, 2017, 126 : 104 - 120

← 1 2 3 4 5 →