Microstructural characterization of laser cladding of Cu-30Ni

被引：33
|
作者：
Adak, B [1 ]
Nash, P
Chen, DJ
Swiglo, A
机构：
[1] IIT, Thermal Proc Technol Ctr, Chicago, IL 60616 USA
[2] Alion Sci & Technol, St Charles, IL 60174 USA
来源：
JOURNAL OF MATERIALS SCIENCE | 2005年 / 40卷 / 08期
关键词：
Polymer; Microstructural Characterization; Laser Cladding;
D O I：
10.1007/s10853-005-1231-5
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The microstructural observations of the laser cladding of Cu-30Ni, were discussed. A diode laser, because of its highest output efficiency compared to other laser sources such as CO2 or YAG laser, was used to heat the source. Different process parameters such as laser power, laser translation speed, wire feed rate and beam angle were used to evaluate the microstructure. The results of the microstructural characterization indicated that high integrity clads can be produced within a wide range of process parameters.
引用
收藏
页码：2051 / 2054
页数：4
相关论文
共 50 条
  • [41] Mechanical and microstructural characterization of brazing joints of the TiC/Cu–20Ni composite to Cu–20Ni
    Carlos A. León-Patiño
    Juan José Laguna-Gasca
    Ena Athenea Aguilar-Reyes
    Julio César Cisneros-Vázquez
    MRS Advances, 2023, 8 : 39 - 45
  • [42] Microstructural and Thermal Characterization of 316L+WC Composite Coatings Obtained by Laser Cladding
    Maurizi Enrici, Tommaso
    Dedry, Olivier
    Boschini, Frederic
    Tchuindjang, Jerome Tchoufang
    Mertens, Anne
    ADVANCED ENGINEERING MATERIALS, 2020, 22 (12)
  • [43] Microstructural characterization of Co-based coating deposited by low power pulse laser cladding
    Farnia, A.
    Ghaini, F. Malek
    Ocelik, V.
    De Hosson, J. Th. M.
    JOURNAL OF MATERIALS SCIENCE, 2013, 48 (06) : 2714 - 2723
  • [44] Microstructural characterization of Co-based coating deposited by low power pulse laser cladding
    A. Farnia
    F. Malek Ghaini
    V. Ocelík
    J. Th. M. De Hosson
    Journal of Materials Science, 2013, 48 : 2714 - 2723
  • [45] Microstructural characterization of the intermetallic compound Al7Cu4Ni
    Herrera, R
    Soriano, O
    Dorantes, HJ
    López, VM
    REVISTA DE METALURGIA, 2004, 40 (02) : 118 - 121
  • [46] Microstructural characterization of an Al-Cu-Mg alloy containing Fe and Ni
    Wang Feng
    Xiong Baiqing
    Zhang Yongan
    Li Zhihui
    Li Peiyue
    JOURNAL OF ALLOYS AND COMPOUNDS, 2009, 487 (1-2) : 445 - 449
  • [47] Microstructural characterization of an Al-Cu-Mg alloy containing Fe and Ni
    Feng, Wang
    Baiqing, Xiong
    Yongan, Zhang
    Zhihui, Li
    Peiyue, Li
    Journal of Alloys and Compounds, 2009, 487 (1-2): : 445 - 449
  • [48] Microstructural analysis of Zr55Cu30Al10Ni5 bulk metallic glasses by laser surface remelting and laser solid forming
    Zhang, Yuanyuan
    Lin, Xin
    Wang, Lilin
    Wei, Lei
    Liu, Fenggang
    Huang, Weidong
    INTERMETALLICS, 2015, 66 : 22 - 30
  • [49] Synthesis and microstructure, properties characterization of Ni-Ti-Cu/Cu-Al functionally graded coating on Mg-Li alloy by laser cladding
    Jiang, Lipeng
    Cui, Xiufang
    Jin, Guo
    Tian, Haoliang
    Tian, Zhimin
    Zhang, Xuerun
    Wan, Simin
    APPLIED SURFACE SCIENCE, 2022, 575
  • [50] Cavitation erosion characterization of Cu-Ni alloy laser cladding layer under the action of high-pressure water jet
    Chang, Yanru
    Liu, Zongde
    Gan, Rong
    Xiao, Hao
    Shen, Yue
    JOURNAL OF ALLOYS AND COMPOUNDS, 2025, 1020
12345