EN 1090-non-destructive testing taking into account the technological capabilities and process limits

被引：0

作者：

Ummenhofer, Thomas ^{[1
]}

Steidl, Frank

Ruff, Daniel C. ^{[1
]}

Knoedel, Peter ^{[2
]}

机构：

[1] KIT, Versuchsanstalt Stahl Holz & Steine, D-76131 Karlsruhe, Germany

[2] Hsch Augsburg, Fak Architektur & Bauwesen, D-86161 Augsburg, Germany

来源：

STAHLBAU | 2012年 / 81卷 / 03期

关键词：

Construction;

D O I：

10.1002/stab.201201537

中图分类号：

TU [建筑科学];

学科分类号：

0813 ;

摘要：

EN 1090 - non-destructive testing taking into account the technological capabilities and process limits. With conversion to the design of metal structures according to the Eurocode also their production is regulated according to EN 1090. Compared to DIN 18800 part 7, the producer is confronted with an increased expenditure of non-destructive tests (NDT). Since non-destructive tests are only required to a very limited extent within the scope of DIN 18800, uncertainties now exist with regard to the requirements of EN 1090 as well as to the selection of suitable testing methods. The requirements of EN 1090 are discussed in detail as follows.

引用

页码：177 / U

页数：4

共 50 条

[31] Non-destructive testing and inspection of unfired pressure vessels subject to cyclic loads in EN 13445-5
Baylac, Guy
Roberts, Ian
Maddox, Stephen
Zeelenberg, Erik
Proceedings of the ASME Pressure Vessels and Piping Conference 2005, Vol 7, 2005, 7 : 335 - 338
[32] Applications of non-destructive testing techniques for post-process control of additively manufactured part
Lu, Q. Y.
Wong, C. H.
VIRTUAL AND PHYSICAL PROTOTYPING, 2017, 12 (04) : 301 - 321
[33] Investigation of the Foam Development Stages by Non-Destructive Testing Technology Using the Freeze Foaming Process
Maier, Johanna
Behnisch, Thomas
Geske, Vinzenz
Ahlhelm, Matthias
Werner, David
Moritz, Tassilo
Michaelis, Alexander
Gude, Maik
MATERIALS, 2018, 11 (12)
[34] In-process, non-destructive multimodal dynamic testing of high-speed composite rotors
Kuschmierz, Robert
Filippatos, Angelos
Langkamp, Albert
Hufenbach, Werner
Czarske, Juergen W.
Fischer, Andreas
SMART SENSOR PHENOMENA, TECHNOLOGY, NETWORKS, AND SYSTEMS INTEGRATION 2014, 2014, 9062
[35] In-process, non-destructive, dynamic testing of high-speed polymer composite rotors
Kuschmierz, Robert
Filippatos, Angelos
Gunther, Philipp
Langkamp, Albert
Hufenbach, Werner
Czarske, Juergen
Fischer, Andreas
MECHANICAL SYSTEMS AND SIGNAL PROCESSING, 2015, 54-55 : 325 - 335
[36] Practical aspects of testing superconducting electromagnets by the capacitor discharge method taking into account the non-linearity of circuit parameters
Michna, Michal
Wilk, Andrzej
Woloszyk, Marek
Ziolko, Michal
Galla, Stanislaw
Szwangruber, Piotr
ARCHIVES OF ELECTRICAL ENGINEERING, 2023, 72 (02) : 323 - 338
[37] Development of a three-tier system of parameters in the formation of the organizational and technological potential of using non-destructive testing methods
Lapidus, Azariy
Khubaev, Alan
Bidov, Tembot
XXII INTERNATIONAL SCIENTIFIC CONFERENCE: CONSTRUCTION THE FORMATION OF LIVING ENVIRONMENT (FORM-2019), 2019, 97
[38] In-process calibration of a non-destructive testing system used for in-process inspection of multi-pass welding
Javadi, Yashar
Sweeney, Nina E.
Mohseni, Ehsan
MacLeod, Charles N.
Lines, David
Vasilev, Momchil
Qiu, Zhen
Vithanage, Randika K. W.
Mineo, Carmelo
Stratoudaki, Theodosia
Pierce, Stephen G.
Gachagan, Anthony
MATERIALS & DESIGN, 2020, 195
[39] MODELING OF AN ION-EXCHANGE PROCESS - POSSIBILITIES AND LIMITS OF THE AVAILABLE MODELS - PROPOSAL FOR A MODEL TAKING INTO ACCOUNT THE MASS-TRANSFER AND DISPERSION PROCESSES
NICOUD, RM
SCHWEICH, D
JOURNAL DE CHIMIE PHYSIQUE ET DE PHYSICO-CHIMIE BIOLOGIQUE, 1988, 85 (02) : 239 - 246
[40] In-process non-destructive ultrasonic testing application during wire plus arc additive manufacturing
Knezovic, N.
Dolsak, B.
ADVANCES IN PRODUCTION ENGINEERING & MANAGEMENT, 2018, 13 (02): : 158 - 168

← 1 2 3 4 5 →