The Influence of Sheet Tilting on Forming Quality in Single Point Incremental Forming

被引：3
|
作者：
Zhu, Hu [1 ]
Wang, Yang [1 ]
Liu, Yibo [2 ]
Jung, Dongwon [3 ]
机构：
[1] Shenyang Aerosp Univ, Coll Mech & Elect Engn, Shenyang 110136, Peoples R China
[2] Guidaojiaotong Polytech Inst, Sci & Technol Training Ctr, Shenyang 110023, Peoples R China
[3] Jeju Natl Univ, Dept Mech Engn, Jeju Si 63243, Jeju Do, South Korea
来源：
MATERIALS | 2021年 / 14卷 / 14期
关键词：
incremental forming; single point forming; sheet tilting; forming quality; PREDICTION; DESIGN; IMPROVEMENT; STRATEGIES; COMPONENT;
D O I：
10.3390/ma14143907
中图分类号：
O64 [物理化学（理论化学）、化学物理学];
学科分类号：
070304 ; 081704 ;
摘要：
In the CNC incremental forming process, the sheet tilting method can be used to realize the non-fracture forming of a surface with large forming angles. However, the forming effect of the formed part will have big differences when the inclined angle of the sheet is different. Therefore, four different tilted sheets with inclined angles of 15 degrees, 20 degrees, 25 degrees, and 30 degrees were used to study the influence of sheet tilting on forming quality by using 1060 Aluminum sheet as the forming sheet in single point CNC incremental forming. First, the influence of four different inclined angles of the sheet on the overall thickness distribution, plastic strain, and material flow of the formed part was studied by using numerical simulation. Then, the influence of four different inclined angles of sheets on the profile accuracy and thickness thinning rate of the formed part was studied through single point incremental forming experiments. The research results show that sheet tilting has little effect on the profile accuracy of the formed part, but has a great influence on the material flow, plastic strain, and thickness distribution.
引用
收藏
页数：15
相关论文
共 50 条
  • [11] Forming limit predictions for the serrated strain paths in single point incremental sheet forming
    Eyckens, P.
    He, S.
    Van Bael, A.
    Van Houtte, P.
    Duflou, J.
    NUMIFORM '07: MATERIALS PROCESSING AND DESIGN: MODELING, SIMULATION AND APPLICATIONS, PTS I AND II, 2007, 908 : 141 - +
  • [12] Investigation of the effect of grain size on forming forces in Single Point Incremental Sheet Forming
    Shrivastava, Parnika
    Tandon, Puneet
    2ND INTERNATIONAL MATERIALS, INDUSTRIAL, AND MANUFACTURING ENGINEERING CONFERENCE, MIMEC2015, 2015, 2 : 41 - 45
  • [13] OF PARTS MADE BY SINGLE-POINT INCREMENTAL SHEET FORMING
    Bosetti, Paolo
    Bruschi, Stefania
    PROCEEDINGS OF THE ASME INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION 2011, VOL 3, 2012, : 925 - 932
  • [14] Experimental and numerical investigations in single point incremental sheet forming
    Dejardin, S.
    Thibaud, S.
    Gelin, J. C.
    NUMIFORM '07: MATERIALS PROCESSING AND DESIGN: MODELING, SIMULATION AND APPLICATIONS, PTS I AND II, 2007, 908 : 889 - +
  • [15] On the potential of single point incremental forming of sheet polymer parts
    Tania A. Marques
    Maria Beatriz Silva
    P. A. F. Martins
    The International Journal of Advanced Manufacturing Technology, 2012, 60 : 75 - 86
  • [16] Investigation of tool wear in single point incremental sheet forming
    da Silva, Pablo Josue
    Alvares, Alberto J.
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 2020, 234 (1-2) : 170 - 188
  • [17] On the potential of single point incremental forming of sheet polymer parts
    Marques, Tania A.
    Silva, Maria Beatriz
    Martins, P. A. F.
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2012, 60 (1-4): : 75 - 86
  • [18] SINGLE POINT INCREMENTAL FORMING OF LARGE SHEET METAL COMPONENTS
    Schieck, Frank
    Mauermann, Reinhard
    Weise, Dieter
    Demmler, Matthias
    PROCEEDINGS OF THE ASME INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION, 2019, VOL 2A, 2019,
  • [19] Single point incremental forming
    Ham, Marnie
    Jeswiet, Jack
    INTERNATIONAL JOURNAL OF MATERIALS & PRODUCT TECHNOLOGY, 2008, 32 (04): : 374 - 387
  • [20] Incremental single point forming
    Jeswiet, J.
    Ali, A.
    American Society of Mechanical Engineers, Manufacturing Engineering Division, MED, 2000, 11 : 509 - 513
12345