The Influence of Sheet Tilting on Forming Quality in Single Point Incremental Forming

被引：3
|
作者：
Zhu, Hu [1 ]
Wang, Yang [1 ]
Liu, Yibo [2 ]
Jung, Dongwon [3 ]
机构：
[1] Shenyang Aerosp Univ, Coll Mech & Elect Engn, Shenyang 110136, Peoples R China
[2] Guidaojiaotong Polytech Inst, Sci & Technol Training Ctr, Shenyang 110023, Peoples R China
[3] Jeju Natl Univ, Dept Mech Engn, Jeju Si 63243, Jeju Do, South Korea
来源：
MATERIALS | 2021年 / 14卷 / 14期
关键词：
incremental forming; single point forming; sheet tilting; forming quality; PREDICTION; DESIGN; IMPROVEMENT; STRATEGIES; COMPONENT;
D O I：
10.3390/ma14143907
中图分类号：
O64 [物理化学（理论化学）、化学物理学];
学科分类号：
070304 ; 081704 ;
摘要：
In the CNC incremental forming process, the sheet tilting method can be used to realize the non-fracture forming of a surface with large forming angles. However, the forming effect of the formed part will have big differences when the inclined angle of the sheet is different. Therefore, four different tilted sheets with inclined angles of 15 degrees, 20 degrees, 25 degrees, and 30 degrees were used to study the influence of sheet tilting on forming quality by using 1060 Aluminum sheet as the forming sheet in single point CNC incremental forming. First, the influence of four different inclined angles of the sheet on the overall thickness distribution, plastic strain, and material flow of the formed part was studied by using numerical simulation. Then, the influence of four different inclined angles of sheets on the profile accuracy and thickness thinning rate of the formed part was studied through single point incremental forming experiments. The research results show that sheet tilting has little effect on the profile accuracy of the formed part, but has a great influence on the material flow, plastic strain, and thickness distribution.
引用
收藏
页数：15
相关论文
共 50 条
  • [1] Influence of ultrasonic vibration on forming force of 1060 aluminum sheet single point incremental forming
    Yao, Zimeng
    Xia, Zhuoxu
    Guo, Xing
    Liang, Xiaoming
    Wu, Shenli
    Liu, Ling
    FERROELECTRICS, 2024, 618 (7-8) : 1612 - 1628
  • [2] Sheet thinning prediction in single point incremental forming
    Ambrogio, G.
    Filice, L.
    Gagliardi, F.
    Micari, F.
    SHEET METAL 2005, 2005, 6-8 : 479 - 486
  • [3] Asymmetric single point incremental forming of sheet metal
    Jeswiet, J
    Micari, F
    Hirt, G
    Bramley, A
    Duflou, J
    Allwood, J
    CIRP ANNALS-MANUFACTURING TECHNOLOGY, 2005, 54 (02) : 623 - 649
  • [4] Forming limit diagrams for single-point incremental forming of aluminium sheet
    Jeswiet, J
    Young, D
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 2005, 219 (04) : 359 - 364
  • [5] FEASIBILITY OF PAST VERTICAL FORMING UTILIZING SINGLE POINT INCREMENTAL SHEET FORMING
    Grimm, Tyler J.
    Ragai, Ihab
    Roth, John T.
    PROCEEDINGS OF THE ASME INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION, 2017, VOL 2, 2018,
  • [6] Forming limit predictions for single-point incremental sheet metal forming
    Van Bael, A.
    Eyckens, P.
    He, S.
    Bouffioux, C.
    Henrard, C.
    Habraken, A. M.
    Duflou, J.
    Van Houtte, P.
    10TH ESAFORM CONFERENCE ON MATERIAL FORMING, PTS A AND B, 2007, 907 : 309 - 314
  • [7] Effects of forming parameters on the forming limit of single-point incremental forming of sheet metal
    Chunjian Su
    Shipeng Lv
    Rui Wang
    Yuting Lv
    Shumei Lou
    Qing Wang
    Sumin Guo
    The International Journal of Advanced Manufacturing Technology, 2021, 113 : 483 - 501
  • [8] Effects of forming parameters on the forming limit of single-point incremental forming of sheet metal
    Su, Chunjian
    Lv, Shipeng
    Wang, Rui
    Lv, Yuting
    Lou, Shumei
    Wang, Qing
    Guo, Sumin
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2021, 113 (1-2): : 483 - 501
  • [9] Influence of mechanical properties of the sheet material on formability in single point incremental forming
    Fratini, L
    Ambrogio, G
    Di Lorenzo, R
    Filice, L
    Micari, F
    CIRP ANNALS-MANUFACTURING TECHNOLOGY, 2004, 53 (01) : 207 - 210
  • [10] Influence of Forming Parameters on the Mechanical Behavior of a Thin Aluminum Sheet Processed through Single Point Incremental Forming
    Ilyas, Muhammad
    Hussain, Ghulam
    Rashid, Haris
    Alkahtani, Mohammed
    METALS, 2020, 10 (11) : 1 - 21
12345