ICP-AES Analysis of Secondary Tungsten-Containing Raw Materials for Production of Hard Alloys

被引：1

作者：

Vyacheslavov, A. V. ^{[1
]}

Bichaev, V. B. ^{[1
]}

Titova, A. D. ^{[1
]}

Rybin, D. S. ^{[2
]}

Ermolaeva, T. N. ^{[3
]}

机构：

[1] Cent Res Inst Struct Mat Prometey, Natl Res Ctr Kurchatov Inst, St Petersburg 191015, Russia

[2] Virial Ltd, St Petersburg 194156, Russia

[3] Lipetsk State Tech Univ, Lipetsk 398600, Russia

来源：

INORGANIC MATERIALS | 2018年 / 54卷 / 14期

关键词：

secondary tungsten-containing raw; recycle cemented tungsten carbides; cemented tungsten carbide; microwave sample preparation; ICP-AES (inductively coupled plasma atomic emission spectrometry); TANTALUM; TITANIUM; CHROMIUM; COBALT;

D O I：

10.1134/S0020168518140169

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

A method for ICP-AES determination of Ti, V, Cr, Fe, Co, Ni, Cu, Zn, and Ta in recycled cemented tungsten carbide is developed including preliminary microwave sample decomposition in a steam pressure vessel (autoclave). We have specified the composition of the reaction mixture for sample dissolution and optimized the parameters of microwave heating in the autoclave. Correctness of the results is proved by the method of sample weight variation and spike tests. The results of analysis are compared with the data obtained by standardless method of X-ray fluorescence spectrometry. The technique is characterized by good reproducibility and allows significant reduction of the analysis time owing to the combination of the multielement method of ICP-AES and microwave sample preparation.

引用

页码：1430 / 1434

页数：5

共 50 条

[41] Error analysis in the certification of secondary raw materials and products containing precious metals
Razumov, VA
Kalmykov, YM
Dushkova, TM
Karpov, YA
Filimonov, LN
INDUSTRIAL LABORATORY, 1997, 63 (09): : 511 - 518
[42] Sampling and Sample Preparation in the Analysis of Secondary Raw Materials Containing Noble Metals
Industrial Laboratory (USSR) (English translation of Zavodskaya Laboratoriya), 62 (10):
[43] Interlaboratory check of the consistency of analysis of secondary raw materials containing noble metals
Karpov, YA
Alekseeva, TY
Arakel'yan, NA
Guseva, VB
INDUSTRIAL LABORATORY, 2000, 66 (04): : 266 - 269
[44] DETERMINATION OF THE CORROSION RATES OF 6 DENTAL NICRMO ALLOYS IN AN ARTIFICIAL SALIVA BY CHEMICAL-ANALYSIS OF THE MEDIUM USING ICP-AES
MULLER, AWJ
MAESSEN, FJMJ
DAVIDSON, CL
DENTAL MATERIALS, 1990, 6 (01) : 63 - 68
[45] Sampling and sample preparation in the analysis of secondary raw materials containing noble metals
Karpov, YA
INDUSTRIAL LABORATORY, 1996, 62 (10): : 608 - 611
[46] Determination of boron in geological materials, high-temperature nickel-base alloys, and uranium-magnesium-rich samples by ICP-AES
Satyanarayana, K
Ramanaiah, GV
Srinivasan, G
Malhotra, RK
ATOMIC SPECTROSCOPY, 1995, 16 (06) : 235 - 242
[47] Dissolution of molybdenum-silicon (-boron) alloys using a mixture of sulfuric, nitric and hydrofluoric acids and a sequential correction method for ICP-AES analysis
Danzaki, Y
Wagatsuma, K
Syogji, T
Yoshimi, K
FRESENIUS JOURNAL OF ANALYTICAL CHEMISTRY, 2001, 369 (02): : 184 - 186
[48] Comparison of dissolution methods for multi-element analysis of some plant materials used as bioindicator of sulphur and heavy metal deposition determined by ICP-AES and ICP-MS
Pöykiö, R
Torvela, H
Perämäki, P
Kuokkanen, T
Rönkkömäki, H
ANALUSIS, 2000, 28 (09) : 850 - 854
[49] Dissolution of molybdenum-silicon (-boron) alloys using a mixture of sulfuric, nitric and hydroﬂuoric acids and a sequential correction method for ICP-AES analysis
Yûetsu Danzaki
Kazuaki Wagatsuma
Tsutomu Syoji
Kyosuke Yoshimi
Fresenius' Journal of Analytical Chemistry, 2001, 369 : 184 - 186
[50] Influence of tungsten carbide raw materials to microstructure and wear performance on PTA hard-facing materials with its micro-mechanism analysis
Zhou, Yiqi
Liu, Rui
Liu, Heng
Yan, Yu
Zhang, Li
Zhou, Wuxi
Yu, Wei
Dong, Chaofang
SURFACE & COATINGS TECHNOLOGY, 2023, 454

← 1 2 3 4 5 →