In-slot Cooling of Electrical Machines Using Traditional Techniques and Additive Manufacturing

被引：0

作者：

Hembel, Ahmed ^{[1
]}

Cakal, Gokhan ^{[1
]}

Sarlioglu, Bulent ^{[1
]}

机构：

[1] Univ Wisconsin Madison, Wisconsin Elect Machines & Power Elect Consortium, Dept Elect & Comp Engn, Madison, WI 53706 USA

来源：

2022 24TH EUROPEAN CONFERENCE ON POWER ELECTRONICS AND APPLICATIONS (EPE'22 ECCE EUROPE) | 2022年

关键词：

Additive manufacturing; Efficiency; Electric machines; In-slot cooling;

D O I：

暂无

中图分类号：

TE [石油、天然气工业]; TK [能源与动力工程];

学科分类号：

0807 ; 0820 ;

摘要：

This paper covers in-slot cooling methods used for the effective cooling of electric machines. Both traditional and additively manufactured cooling solutions are discussed throughout the paper. A new additively manufactured heat exchanger is also presented in the paper. It is shown that the proposed solution can boost current density to 83 A(rms)/mm(2) using PCB as stator winding.

引用

页数：10

共 50 条

[31] Additive Manufacturing of Nd-Fe-B Permanent Magnets and Their Application in Electrical Machines
Wu, Julan
Korman, Oguz
Di Nardo, Mauro
Degano, Michele
Gerada, Chris
Ashcroft, Ian
Hague, Richard J. M.
Aboulkhair, Nesma T.
IEEE ACCESS, 2024, 12 : 138921 - 138931
[32] Additive Manufacturing of Non-homogeneous Magnetic Cores for Electrical Machines - Opportunities and Challenges
Pham, Thang Q.
Foster, Shanelle N.
2020 INTERNATIONAL CONFERENCE ON ELECTRICAL MACHINES (ICEM), VOL 1, 2020, : 1623 - 1629
[33] Survey on Applying 3D Printing in Manufacturing the Cooling Systems of Electrical Machines
Szabo, Lorand
PROCEEDINGS OF 2022 IEEE INTERNATIONAL CONFERENCE ON AUTOMATION, QUALITY AND TESTING, ROBOTICS (AQTR 2022), 2022, : 349 - 354
[34] Thermal Modeling of the Stator Slot in Electrical Machines Using an Extended Layer Approach
Hoffmann, Felix
Jux, Benedict
Doppelbauer, Martin
45TH ANNUAL CONFERENCE OF THE IEEE INDUSTRIAL ELECTRONICS SOCIETY (IECON 2019), 2019, : 1405 - 1410
[35] Comparison of Different NDT Techniques for Evaluation of the Quality of PCBs Produced Using Traditional vs. Additive Manufacturing Technologies
Jasiuniene, Elena
Raisutis, Renaldas
Samaitis, Vykintas
Jankauskas, Audrius
SENSORS, 2024, 24 (06)
[36] Improvements in Injection Moulds Cooling and Manufacturing Efficiency Achieved by Wire Arc Additive Manufacturing Using Conformal Cooling Concept
Marques, Alejandro
Dieste, Jose Antonio
Monzon, Ivan
Laguia, Alberto
Gracia, Pascual
Javierre, Carlos
Claveria, Isabel
Elduque, Daniel
POLYMERS, 2024, 16 (21)
[37] USING METAL ADDITIVE MANUFACTURING FOR CONFORMAL COOLING OF DIES IN WIRE DRAWING
Van Staden, A. C.
Oosthuizen, G. A.
Hugo, P. A.
Treurnicht, N. F.
JOURNAL FOR NEW GENERATION SCIENCES, 2016, 14 (03) : 279 - 296
[38] INTEGRATION OF COOLING HOLES INTO A TURBINE VANE MADE USING ADDITIVE MANUFACTURING
Gailey, Nicholas L.
Barringer, Michael D.
Berdanier, Reid A.
Thole, Karen A.
PROCEEDINGS OF ASME TURBO EXPO 2024: TURBOMACHINERY TECHNICAL CONFERENCE AND EXPOSITION, GT2024, VOL 7, 2024,
[39] Tailoring Surface Roughness Using Additive Manufacturing to Improve Internal Cooling
Snyder, Jacob C.
Thole, Karen A.
JOURNAL OF TURBOMACHINERY-TRANSACTIONS OF THE ASME, 2020, 142 (07):
[40] Reconstruction of an Extensive Midfacial Defect Using Additive Manufacturing Techniques
Fernandes, Nelson
van den Heever, Jacobus
Hoogendijk, Christiaan
Botha, Sarel
Booysen, Gerrie
Els, Johan
JOURNAL OF PROSTHODONTICS-IMPLANT ESTHETIC AND RECONSTRUCTIVE DENTISTRY, 2016, 25 (07): : 589 - 594

← 1 2 3 4 5 →