Oxidation characteristics of duplex stainless steel 2205 in simulated combustion atmosphere

被引:3
|
作者
Peng, J. G. [1 ,2 ]
Li, M. C. [1 ]
Luo, S. Z. [2 ]
Song, H. M. [2 ]
Jiang, L. Z. [2 ]
机构
[1] Shanghai Univ, Inst Mat, Shanghai 200072, Peoples R China
[2] Baoshan Iron & Steel Co Ltd, Res Inst, Shanghai 200431, Peoples R China
关键词
Duplex stainless steel; Oxidation; Temperature; Combustion atmosphere; HIGH-TEMPERATURE OXIDATION; WATER-VAPOR; 1273; K;
D O I
10.1179/1432891714Z.0000000001086
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
High temperature oxidation of duplex stainless steel 2205 was carried out in the simulated combustion atmosphere of natural gas (i.e. 3% O-2-10% CO2-18% H2O-N-2) from 1100 to 1260 degrees C by means of weight gain, X-ray diffraction and scanning electron microscope. The results show that the initial oxidation kinetics submits to parabolic law and nodules are formed at about 1180 degrees C. The oxidation rate increases slowly from 1100 to 1220 degrees C but dramatically at 1260 degrees C because of the fast growth of nodules. The nodules consist of three thin oxide layers, i.e. the external Fe-rich oxides, the mid-Fe-Cr spinels and the internal Cr-rich oxides. It is suggested that the reheating temperature should be below 1180 degrees C for removing the oxide scales in pickling.
引用
收藏
页码:245 / 249
页数:5
相关论文
共 50 条
  • [31] Finite Element Analysis of 2205 Duplex Stainless Steel Welds
    Kisasoz, Alptekin
    Karaaslan, Ahmet
    MATERIALS TESTING, 2014, 56 (10) : 795 - 799
  • [32] Low-Temperature Nitridation of 2205 Duplex Stainless Steel
    J. C. Dalton
    F. Ernst
    A. H. Heuer
    Metallurgical and Materials Transactions A, 2020, 51 : 608 - 617
  • [33] Corrosion induced by cathodic hydrogen in 2205 duplex stainless steel
    Michalska, J.
    TECHNOLOGIES AND PROPERTIES OF MODERN UTILISED MATERIALS, 2011, 22
  • [34] Research on superplastic diffusion bonding of 2205 duplex stainless steel
    Gao, X.
    Li, J.
    Jin, Q.
    Li, S.
    Ren, X.
    KOVOVE MATERIALY-METALLIC MATERIALS, 2020, 58 (03): : 181 - 194
  • [35] Qualitative and quantitative analysis of σ and χ phases in 2205 duplex stainless steel
    Michalska, Joanna
    Sozanska, Maria
    MATERIALS CHARACTERIZATION, 2006, 56 (4-5) : 355 - 362
  • [36] Hydrogen-enhanced cracking of 2205 duplex stainless steel
    Tsay, L. W.
    Young, M. C.
    Shin, C. -S.
    Chan, S. L. I.
    FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, 2007, 30 (12) : 1228 - 1236
  • [37] Analysis of χ phase precipitation in aged 2205 duplex stainless steel
    Heping Liu
    Hu’er Sun
    Bin Liu
    Dazhao Li
    Fenger Sun
    Yongtao Zhang
    Journal of Wuhan University of Technology-Mater. Sci. Ed., 2015, 30 : 591 - 595
  • [38] Effect of heat treatment on the microstructure of duplex stainless steel 2205
    Mampuya, M. B.
    Umba, M. C.
    Mutombo, K.
    Olubambi, P. A.
    MATERIALS TODAY-PROCEEDINGS, 2021, 38 : 1107 - 1112
  • [39] Strengthening of AISI 2205 duplex stainless steel by strain ageing
    Karahan, Tuba
    Emre, Hayriye Ertek
    Tumer, Mustafa
    Kacar, Ramazan
    MATERIALS & DESIGN, 2014, 55 : 250 - 256
  • [40] Analysis of χ Phase Precipitation in Aged 2205 Duplex Stainless Steel
    刘和平
    SUN Hu'er
    LIU Bin
    LI Dazhao
    SUN Fenger
    ZHANG Yongtao
    Journal of Wuhan University of Technology(Materials Science), 2015, (03) : 591 - 595