Impact of stator winding of a five-phase permanent-magnet motor on postfault operations

被引:91
|
作者
Bianchi, Nicola [1 ]
Bolognani, Silveno [1 ]
Pre, Michele Dai [1 ]
机构
[1] Univ Padua, Dept Elect Engn, I-35131 Padua, Italy
关键词
AC motor drives; AC motors; fault-tolerant machines; multiphase machines; permanent-magnet (PM) motors; variable speed drives;
D O I
10.1109/TIE.2008.920645
中图分类号
TP [自动化技术、计算机技术];
学科分类号
0812 ;
摘要
The performance of a,five-phase permanent-magnet (PM) motor is analyzed under postfault conditions. Proper current control strategies are adopted so as to guarantee safe drive operation after any fault occurrence. This paper covers three fault types: the open circuit condition of a single phase, the open circuit condition of two nonadjacent phases, and the open, circuit condition of two adjacent phases. Two motors with two different windings (with double and single layers, respectively) are compared under each fault type. This paper aims to highlight the difference in the motor performance of motors adopting these two different windings. A further novelty of this paper is that the proper current control strategies are derived analytically, including not only the fundamental harmonic of the flux-density distribution but also the higher harmonics. It is shown that these harmonics cause high torque oscillations. Owing to this analytical approach, the strategy can be applied to a variety of PM motors. In addition, the postfault current waveforms remain sinusoidal, making the current control easier. For each fault type, the results of both simulations and experimental tests are included. A good match between analytical predictions and experimental tests validates the proposed current control strategies.
引用
收藏
页码:1978 / 1987
页数:10
相关论文
共 50 条
  • [21] A New Control Strategy of Five-Phase Permanent-Magnet Motor Drives with a Third Harmonic Current Injection
    Liu, Guohai
    Yan, Lihao
    Zhang, Duo
    Zhao, Wenxiang
    FUNCTIONAL MANUFACTURING TECHNOLOGIES AND CEEUSRO II, 2011, 464 : 191 - 194
  • [22] Comparison of Two SVPWM Control Strategies of Five-Phase Fault-Tolerant Permanent-Magnet Motor
    Liu, Guohai
    Qu, Li
    Zhao, Wenxiang
    Chen, Qian
    Xie, Ying
    IEEE TRANSACTIONS ON POWER ELECTRONICS, 2016, 31 (09) : 6621 - 6630
  • [23] Sensorless Control of Five-Phase Permanent-Magnet Synchronous Motor Based on Third-Harmonic Space
    Li, Jianhua
    Du, Bochao
    Zhao, Tianxu
    Cheng, Yuan
    Cui, Shumei
    IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS, 2022, 69 (08) : 7685 - 7695
  • [24] Application of stator shifting to five-phase fractional-slot concentrated winding interior permanent magnet synchronous machine
    Abdel-Khalik, Ayman S.
    Ahmed, Shehab
    Massoud, Ahmed
    IET ELECTRIC POWER APPLICATIONS, 2016, 10 (07) : 681 - 690
  • [25] Unified Control Scheme of Five-Phase Open-Winding Permanent-Magnet Synchronous Generator Systems for Aerospace Applications
    Zheng, Zaiping
    Li, Qiqi
    Li, Xuyang
    Zheng, Ping
    Qiao, Guangyuan
    Wang, Kaichun
    IEEE ACCESS, 2021, 9 : 121445 - 121455
  • [26] Multiobjective Design Optimization of Five-Phase Halbach Array Permanent-Magnet Machine
    Sadeghi, Siavash
    Parsa, Leila
    IEEE TRANSACTIONS ON MAGNETICS, 2011, 47 (06) : 1658 - 1666
  • [27] Winding Design and Analysis for a Disc-Type Permanent-Magnet Synchronous Motor with a PCB Stator
    Wang, Xiaoyuan
    Lu, Huaidong
    Li, Xiang
    ENERGIES, 2018, 11 (12)
  • [28] Five-Phase Permanent Magnet Synchronous Motor Drive for Aircraft Applications
    Kuang, Zhi
    Zhao, Tianxu
    Cui, Shumei
    2016 UKACC 11TH INTERNATIONAL CONFERENCE ON CONTROL (CONTROL), 2016,
  • [29] Five-phase interior permanent magnet motor with low torque pulsation
    Parsa, L
    Toliyat, HA
    CONFERENCE RECORD OF THE 2005 IEEE INDUSTRY APPLICATIONS CONFERENCE, VOLS 1-4, 2005, : 1770 - 1775
  • [30] Vector Controlled Five-Phase Permanent Magnet Synchronous Motor Drive
    Hosseyni, Anissa
    Trabelsi, Ramzi
    Mimouni, Med Faouzi
    Iqbal, Atif
    2014 IEEE 23RD INTERNATIONAL SYMPOSIUM ON INDUSTRIAL ELECTRONICS (ISIE), 2014, : 2122 - 2127