Optimization of p-type segmented FeSi2/Bi2Te3 thermoelectric material prepared by spark plasma sintering

被引：12
|
作者：
Cui, JL [1 ]
机构：
[1] Ningbo Coll, Dept Mech Engn, Ningbo 315016, Zhejiang Prov, Peoples R China
来源：
MATERIALS LETTERS | 2003年 / 57卷 / 24-25期
关键词：
functionally graded thermoelectric materials (FGMs); power output; junction temperature; calculation and measurement;
D O I：
10.1016/S0167-577X(03)00268-4
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
A p-type segmented FeSi2/Bi2Te3 thermoelectric material has been optimized and the optimal junction temperature has been determined based on estimation and measurement. It was observed that the optimal junction temperature is about 195 degreesC, which corresponds to the segment length ratio 10:1 and the hot-side temperature 510 degreesC for the segmented material FeSi2/Bi2Te3. The maximum power outputs are about 800 (W m(-2)) from calculation and 610 (W m(-2)) from measurement for the optimized segmented materials, respectively, being approximate 1.4 times those of homogeneous materials beta-FeSi2 at the same applied circumstance. (C) 2003 Elsevier Science B.V, All rights reserved.
引用
收藏
页码：4074 / 4078
页数：5
相关论文
共 50 条
  • [21] A comparative study of Spark Plasma Sintering (SPS), Hot Isostatic Pressing (HIP) and microwaves sintering techniques on p-type Bi2Te3 thermoelectric properties
    Delaizir, G.
    Bernard-Granger, G.
    Monnier, J.
    Grodzki, R.
    Kim-Hak, O.
    Szkutnik, P. -D.
    Soulier, M.
    Saunier, S.
    Goeuriot, D.
    Rouleau, O.
    Simon, J.
    Godart, C.
    Navone, C.
    MATERIALS RESEARCH BULLETIN, 2012, 47 (08) : 1954 - 1960
  • [22] Thermoelectric performance of n-type and p-type β-FeSi2 prepared by pressureless sintering with Cu addition
    Ito, M
    Nagai, H
    Tanaka, T
    Katsuyama, S
    Majima, K
    JOURNAL OF ALLOYS AND COMPOUNDS, 2001, 319 (1-2) : 303 - 311
  • [23] Thermoelectric properties of p-type (Bi2Te3)0.2 (Sb2Te3)0.8 thermoelectric material doped with PbTe
    Kusano, D
    Hori, Y
    JOURNAL OF THE JAPAN INSTITUTE OF METALS, 2002, 66 (10) : 1063 - 1065
  • [24] Fabrication and thermoelectric properties of N-type Bi2Te3 based compounds by spark plasma sintering
    Lee, DM
    Lim, CH
    Cho, DC
    Shin, SY
    Cho, WS
    ECO-MATERIALS PROCESSING & DESIGN VI, 2005, 486-487 : 253 - 256
  • [25] Microstructure and thermoelectric properties of p-type Bi2Te3-Sb2Te3 alloys produced by rapid solidification and spark plasma sintering
    Moon, ChulDong
    Shin, Sumin
    Kim, DoHyang
    Kim, Taek-Soo
    JOURNAL OF ALLOYS AND COMPOUNDS, 2010, 504 : S504 - S507
  • [26] Microstructure and thermoelectric properties of p-type Bi0.5Sb1.5Te3 compounds prepared by spark plasma sintering
    Cho, Won-Seung
    Cho, Dong-Choul
    Lim, Cheol-Ho
    Lee, Chi-Hwan
    Hwang, Woon-Suk
    Yoo, Yeon-Chul
    ECO-MATERIALS PROCESSING & DESIGN VII, 2006, 510-511 : 1122 - 1125
  • [27] Thermoelectric performance of electrophoretically deposited p-type Bi2Te3 film
    Talebi, Tahereh
    Ghomashchi, Reza
    Talemi, Pejman
    Aminorroaya, Sima
    APPLIED SURFACE SCIENCE, 2019, 477 : 27 - 31
  • [28] Thermoelectric anisotropy of n-type Bi2Te3-xSex prepared by spark plasma sintering
    Li, D.
    Qin, X. Y.
    Zhang, J.
    Song, C. J.
    Liu, Y. F.
    Wang, L.
    Xin, H. X.
    Wang, Z. M.
    RSC ADVANCES, 2015, 5 (54): : 43717 - 43722
  • [29] Thermoelectric properties of segmented Bi2Te3/PbTe
    Koshigoe, M
    Kudo, Y
    Hashimoto, M
    Shiota, I
    Nishida, IA
    XVII INTERNATIONAL CONFERENCE ON THERMOELECTRICS, PROCEEDINGS ICT 98, 1998, : 479 - 482
  • [30] Preparation of β-FeSi2 thermoelectric material by laser sintering
    Wu, Hao
    Hu, Bing
    Tian, Nianjun
    Zheng, Qiguang
    MATERIALS LETTERS, 2011, 65 (19-20) : 2877 - 2879
12345