Decomposition of binder from a ceramic injection molding sample

被引：4
|
作者：
Hsu, CK [1 ]
Lee, JS
Jaw, KS
机构：
[1] Natl Taipei Univ Technol, Dept Mat & Mineral Resources Engn, Taipei, Taiwan
[2] Chung Yuan Christian Univ, Dept Chem, Chungli 32023, Taiwan
[3] Chung Shan Inst Sci & Technol, Lungtan 32526, Taiwan
[4] Kuang Wu Jr Coll Technol, Dept Chem Engn, Taipei, Taiwan
来源：
THERMOCHIMICA ACTA | 2001年 / 367卷
关键词：
ceramic injection molding; thermal analysis; kinetic parameters;
D O I：
10.1016/S0040-6031(00)00682-1
中图分类号：
O414.1 [热力学];
学科分类号：
摘要：
Ceramic injection molding (CIM) has been recognized as attractive technique for the fabrication of ceramic parts. Binder systems comprise between approximately 5 and 40 vol.% of a given ceramic green body depending on the chosen forming method. In this work, the thermal decomposition behaviors of four binder systems used in CIM were investigated by thermal analysis. The decomposition kinetic parameters were also evaluated using non-isothermal DSC/TG techniques. (C) 2001 Elsevier Science B.V. All rights reserved.
引用
收藏
页码：335 / 338
页数：4
相关论文
共 50 条
  • [31] Thermodynamics calculation of binder ingredients for powder injection molding
    State Key Lab. for Powder Metallurgy, Central South University, Changsha 410083, China
    Zhongguo Youse Jinshu Xuebao/Chinese Journal of Nonferrous Metals, 2001, 11 (03): : 441 - 444
  • [32] Powder injection molding of metallic and ceramic microparts
    Merz, L
    Rath, S
    Piotter, V
    Ruprecht, R
    Hausselt, J
    MICROSYSTEM TECHNOLOGIES-MICRO-AND NANOSYSTEMS-INFORMATION STORAGE AND PROCESSING SYSTEMS, 2004, 10 (03): : 202 - 204
  • [33] Extrusion and injection molding of ceramic micro and nanocomposites
    F. Kern
    R. Gadow
    International Journal of Material Forming, 2009, 2 : 609 - 612
  • [34] STUDY OF CERAMIC INJECTION-MOLDING PARAMETERS
    MUTSUDDY, BC
    ADVANCED CERAMIC MATERIALS, 1987, 2 (3A): : 213 - 218
  • [35] SELECTION OF A POWDER FOR CERAMIC INJECTION-MOLDING
    NOGUEIRA, REFQ
    EDIRISINGHE, MJ
    GAWNE, DT
    JOURNAL OF MATERIALS SCIENCE, 1992, 27 (23) : 6525 - 6531
  • [36] Injection molding of oxide ceramic with high performance
    Xie, ZP
    Yu, XG
    Li, JJ
    Luo, JS
    Li, JB
    Huang, Y
    RARE METAL MATERIALS AND ENGINEERING, 2005, 34 : 455 - 458
  • [37] Rheology of ceramic injection-molding feedstocks
    Pabst, W
    Havrda, J
    Gregorová, E
    CERAMICS-SILIKATY, 1999, 43 (01) : 1 - 11
  • [38] Advance in research of alumina ceramic injection molding
    College of Engineering Technology, Southwest University, Chongqing, China
    不详
    Gongneng Cailiao, 21 (21007-21011 ans 21017):
  • [39] IMPORTANCE OF INJECTION-MOLDING IN CERAMIC TECHNOLOGY
    MUTSUDDY, BC
    AMERICAN CERAMIC SOCIETY BULLETIN, 1983, 62 (08): : 853 - 853
  • [40] RHEOLOGY OF CERAMIC INJECTION-MOLDING FORMULATIONS
    EDIRISINGHE, MJ
    EVANS, JRG
    BRITISH CERAMIC TRANSACTIONS AND JOURNAL, 1987, 86 (01): : 18 - 22
12345