Decomposition of binder from a ceramic injection molding sample

被引：4
|
作者：
Hsu, CK [1 ]
Lee, JS
Jaw, KS
机构：
[1] Natl Taipei Univ Technol, Dept Mat & Mineral Resources Engn, Taipei, Taiwan
[2] Chung Yuan Christian Univ, Dept Chem, Chungli 32023, Taiwan
[3] Chung Shan Inst Sci & Technol, Lungtan 32526, Taiwan
[4] Kuang Wu Jr Coll Technol, Dept Chem Engn, Taipei, Taiwan
来源：
THERMOCHIMICA ACTA | 2001年 / 367卷
关键词：
ceramic injection molding; thermal analysis; kinetic parameters;
D O I：
10.1016/S0040-6031(00)00682-1
中图分类号：
O414.1 [热力学];
学科分类号：
摘要：
Ceramic injection molding (CIM) has been recognized as attractive technique for the fabrication of ceramic parts. Binder systems comprise between approximately 5 and 40 vol.% of a given ceramic green body depending on the chosen forming method. In this work, the thermal decomposition behaviors of four binder systems used in CIM were investigated by thermal analysis. The decomposition kinetic parameters were also evaluated using non-isothermal DSC/TG techniques. (C) 2001 Elsevier Science B.V. All rights reserved.
引用
收藏
页码：335 / 338
页数：4
相关论文
共 50 条
  • [1] Study of ceramic injection molding technology using polyglycol as binder
    Yu, HA
    Liu, Y
    Suo, LC
    Wang, XQ
    ADVANCED DESIGN AND MANUFACTURE IN THE GLOBAL MANUFACTURING ERA, VOL 2, 1997, : 584 - 589
  • [2] Synthesis and application of novel water-soluble binder for ceramic injection molding
    Xu, J
    Zhang, Y
    Zhang, JY
    Guo, BH
    RARE METAL MATERIALS AND ENGINEERING, 2003, 32 : 175 - 178
  • [3] Rheological and Thermal Performance of Newly Developed Binder Systems for Ceramic Injection Molding
    Hausnerova, Berenika
    Kasparkova, Vera
    Hnatkova, Eva
    VIII INTERNATIONAL CONFERENCE ON TIMES OF POLYMERS AND COMPOSITES: FROM AEROSPACE TO NANOTECHNOLOGY, 2016, 1736
  • [4] Die surface slip property and viscosity of ceramic-binder composites for injection molding
    Chung, YH
    Kato, K
    Otake, N
    INDUSTRIAL CERAMICS, 2000, 20 (03): : 185 - 187
  • [5] Study on Binder System for Micro Powder Injection Molding of ZrO2 Ceramic
    Liu, L.
    Ni, X. L.
    Yin, H. Q.
    Qu, X. H.
    THERMEC 2011, PTS 1-4, 2012, 706-709 : 1948 - +
  • [6] Binder removal in powder injection molding
    Angermann, HH
    VanderBiest, O
    REVIEWS IN PARTICULATE MATERIALS, 1995, 3 : 35 - 69
  • [7] Binder system for micropowder injection molding
    Liu, ZY
    Loh, NH
    Tor, SB
    Khor, KA
    Murakoshi, Y
    Maeda, R
    MATERIALS LETTERS, 2001, 48 (01) : 31 - 38
  • [8] Progress of ceramic injection molding
    Wang, X
    Xie, ZP
    Li, JB
    Huang, Y
    RARE METAL MATERIALS AND ENGINEERING, 2004, 33 (11) : 1121 - 1126
  • [9] Study on ceramic injection molding
    Xie, Zhipeng
    Yang, Jinlong
    Huang, Yong
    Kuei Suan Jen Hsueh Pao/ Journal of the Chinese Ceramic Society, 26 (03): : 324 - 330
  • [10] New eco-friendly binder based on natural rubber for ceramic injection molding process
    Escobar, C. F.
    dos Santos, L. A.
    JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2015, 35 (13) : 3567 - 3575
12345