Effect of electropolishing on corrosion of Alloy 600 in high temperature water

被引：32
|
作者：
Han, Yaolei [1 ]
Mei, Jinna [2 ]
Peng, Qunjia [1 ]
Han, En-Hou [1 ]
Ke, Wei [1 ]
机构：
[1] Chinese Acad Sci, Inst Met Res, Key Lab Nucl Mat & Safety Assessment, Shenyang 110016, Peoples R China
[2] Suzhou Nucl Power Res Inst, Suzhou 215004, Peoples R China
来源：
CORROSION SCIENCE | 2015年 / 98卷
关键词：
Superalloys; XPS; TEM; High temperature corrosion; OXIDE-FILM FORMATION; STAINLESS-STEEL; OXIDATION BEHAVIOR; MECHANISM; 304-STAINLESS-STEEL; INITIATION; CRACKING; STEAM; 304L;
D O I：
10.1016/j.corsci.2015.05.026
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Effect of change in surface composition and microstructure by electropolishing on corrosion of Alloy 600 in high temperature water was investigated. The investigation was conducted by comparing the corrosion of electropolished surface (EPS) with that of the 40 nm-colloidal silica slurry polished surface (CPS), which has few composition change as well as few surface residual strain. The result revealed while EPS had a thicker oxide scale at the early stage of corrosion, it showed a lower corrosion rate when the exposure time was >25 h. This is attributed to formation of a Cr-enriched oxide film at the primary surface by electropolishing. (C) 2015 Elsevier Ltd. All rights reserved.
引用
收藏
页码：72 / 80
页数：9
相关论文
共 50 条
  • [41] STRESS-CORROSION CRACKING OF INCONEL 600 IN HIGH-TEMPERATURE WATER
    BANDY, R
    VANROOYEN, D
    TRANSACTIONS OF THE AMERICAN NUCLEAR SOCIETY, 1981, 39 : 447 - 447
  • [42] EFFECT OF ENVIRONMENTAL-FACTORS ON STRESS-CORROSION CRACKING OF THE NI-BASE ALLOY-600 IN OXYGENATED HIGH-TEMPERATURE WATER
    MATSUSHIMA, S
    SHIMIZU, Y
    TRANSACTIONS OF THE JAPAN INSTITUTE OF METALS, 1983, 24 (03): : 149 - 153
  • [43] Effect of chloride and sulfate additions on corrosion of low alloy steel in high-temperature water
    Sipila, Konsta
    Bojinov, Martin
    Mayinger, Wolfgang
    Saario, Timo
    Stanislowski, Michael
    ELECTROCHIMICA ACTA, 2015, 173 : 757 - 770
  • [44] EFFECT OF HYDROGEN ON THE INTERGRANULAR STRESS-CORROSION CRACKING OF ALLOY-600 IN HIGH-TEMPERATURE AQUEOUS ENVIRONMENTS
    TOTSUKA, N
    LUNARSKA, E
    CRAGNOLINO, G
    SZKLARSKASMIALOWSKA, Z
    CORROSION, 1987, 43 (08) : 505 - 514
  • [45] Hydrogen induced intergranular stress corrosion cracking in nickel based alloy 600 under high temperature water-steam
    Lopez, HF
    Mehboob, A
    Albarran, JL
    Martinez, L
    HYDROGEN EFFECTS ON MATERIAL BEHAVIOR AND CORROSION DEFORMATION INTERACTIONS, 2003, : 741 - 750
  • [46] INTERGRANULAR STRESS-CORROSION CRACKING OF ALLOY 600 AND X-750 IN HIGH-TEMPERATURE DEAERATED WATER STEAM
    SHEN, Y
    SHEWMON, PG
    METALLURGICAL TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 1991, 22 (08): : 1857 - 1864
  • [47] THE INFLUENCE OF THE STRAIN-RATE ON THE STRESS-CORROSION CRACKING OF ALLOY-600 IN HIGH-TEMPERATURE PRIMARY WATER
    BOURSIER, JM
    DESJARDINS, D
    VAILLANT, F
    CORROSION SCIENCE, 1995, 37 (03) : 493 - 508
  • [48] Aftereffects produced in alloy 600 by exposure to lithiated high-temperature water
    Xia, Z., 1600, (47):
  • [49] Effect of chromium content on stress corrosion cracking susceptibility of shielded metal arc weld metals for 600 type alloy in high temperature pressurized pure water
    Nishikawa, Satoru
    Horii, Yukihiko
    Ikeuchi, Kenji
    Yosetsu Gakkai Ronbunshu/Quarterly Journal of the Japan Welding Society, 2009, 27 (04): : 278 - 286
  • [50] Effect of phosphorus content on stress corrosion cracking susceptibility of shielded metal arc weld metals for 600 type alloy in high temperature pressurised pure water
    Nishikawa, Satoru
    Horii, Yukihiko
    Ikeuchi, Kenji
    Welding International, 2013, 27 (10) : 747 - 757
12345