Study of the removal mechanism of magnesium from Al-Si liquid alloys using silica base minerals injection

被引：1

作者：

Munoz-Arroyo, R. ^{[1
]}

Escobedo-Bocardo, J. C. ^{[1
]}

Hernandez-Garcia, H. M. ^{[1
]}

Cortes-Hernandez, D. A. ^{[1
]}

Terrones-Maldonado, M. ^{[2
]}

Rodriguez-Pulido, A. ^{[2
]}

Hernandez-Pinero, J. L. ^{[3
]}

机构：

[1] IPN, Ctr Invest & Estudios Avanzados, Unidad Saltillo, Mexico City, DF, Mexico

[2] Inst Potosino Invest Ciencia & Tecnol, San Luis Potosi, Mexico

[3] Univ Autonoma Nuevo Leon, Nuevo Leon, Mexico

来源：

REVISTA DE METALURGIA | 2010年 / 46卷 / 04期

关键词：

Zeolite; Silica; Aluminum; Magnesium; Minerals; MOLTEN ALUMINUM-ALLOYS;

D O I：

10.3989/revmetalm.0949

中图分类号：

TF [冶金工业];

学科分类号：

0806 ;

摘要：

In order to eliminate magnesium from an A 380 Al-Si alloy at 750 degrees C, the submerged powder injection method, using an inert carrier gas (Ar), was applied. The injected powders in the liquid aluminum bath were zeolite, silica and mixtures of zeolite-silica minerals. For each experiment the response variables were: eliminated magnesium versus injection time and quantity of drosses produced. Chemical analysis by atomic absorption spectrometry showed that mixtures of silica-zeolite 66:34 wt% have the best results with regarding to the removal magnesium from 1 to 0.0066 wt%. During the elimination of magnesium complex stoichiometry compounds were formed due to the reactions among zeolite, water steam and liquid aluminum. These compounds were analyzed by XRD, SEM and TEM. The results obtained, along with using the FactSage 6 thermodynamic software, allowed to elucidate the reaction mechanism between the minerals used and liquid aluminum.

引用

页码：351 / 359

页数：9

共 48 条

[21] STRUCTURE OF FILMS OF THE AL-SI ALLOYS (6.5-15.5-PERCENT AT SI), HARDENED FROM THE LIQUID-STATE REGION
MAZUR, VI
PRIGUNOVA, AG
TARAN, IN
DOKLADY AKADEMII NAUK SSSR, 1979, 244 (02): : 405 - 407
[22] VACUUM CARBOTHERMIC PRODUCTION OF ALUMINUM AND AL-SI ALLOYS FROM KAOLIN CLAY: A THERMODYNAMIC STUDY
Halmann, Martin
MINERAL PROCESSING AND EXTRACTIVE METALLURGY REVIEW, 2014, 35 (02): : 106 - 116
[23] MAGNESIUM REMOVAL FROM MOLTEN ALUMINUM ALLOYS USING ZEOLITE AND ZEOLITE-SILICA MIXTURES
Arroyo, R. Munoz
Bocardo, J. C. Escobedo
Hernandez, D. A. Cortes
Garcia, H. M. Hernandez
Robles, J. M. Almanza
Donizak, J.
Kolenda, Z.
ARCHIVES OF METALLURGY AND MATERIALS, 2008, 53 (04) : 1003 - 1006
[24] PHASE-COMPOSITION AND PHASE-TRANSFORMATIONS IN AL-SI ALLOYS HARDENED FROM THE LIQUID-STATE
UZLOV, KI
MAZUR, VI
KUTSOVA, VZ
METAL SCIENCE AND HEAT TREATMENT, 1986, 28 (11-12) : 785 - 788
[25] A kinetic study on the magnesium removal from molten aluminium alloys using submerged SiO2 powders injection
Escobedo, JC
Hernández, JF
Escobedo, S
Flores, A
Cortés, DA
REVISTA DE METALURGIA, 2003, 39 (03) : 172 - 182
[26] A Study of the Laser Removal Process of Al-Si Coating from 22MnB5 Steel
Zhang, Tao
Xu, Jihao
Lin, Shuxia
Yu, Wangwang
Chen, Yong
MATERIALS, 2023, 16 (10)
[27] Si modified aluminide coatings on a Ni-base superalloy prepared using Al-Si plasma irradiation: Growth mechanism and oxidation behavior
Wang, Wei
Li, Zejie
Lei, Yuesui
Wu, Mingyu
Cheng, Yuxian
Shen, Mingli
Zhu, Shenglong
Wang, Fuhui
SURFACE & COATINGS TECHNOLOGY, 2024, 494
[28] Study of Microstructural and Machining Characteristics of Hypereutectic Al-Si Alloys Using Wire-EDM for Photovoltaic Application
Priyaranjan Samal
D. Mani Babu
S. Venkat Kiran
B. Surekha
Pandu R. Vundavilli
Animesh Mandal
Silicon, 2021, 13 : 4407 - 4419
[29] Study of Microstructural and Machining Characteristics of Hypereutectic Al-Si Alloys Using Wire-EDM for Photovoltaic Application
Samal, Priyaranjan
Babu, D. Mani
Kiran, S. Venkat
Surekha, B.
Vundavilli, Pandu R.
Mandal, Animesh
SILICON, 2021, 13 (12) : 4407 - 4419
[30] Effect of strontium on liquid structure of Al-Si hypoeutectic alloys using high-energy X-ray diffraction
Srirangam, P.
Kramer, M. J.
Shankar, S.
ACTA MATERIALIA, 2011, 59 (02) : 503 - 513

← 1 2 3 4 5 →