Study of the removal mechanism of magnesium from Al-Si liquid alloys using silica base minerals injection

被引：1
|
作者：
Munoz-Arroyo, R. [1 ]
Escobedo-Bocardo, J. C. [1 ]
Hernandez-Garcia, H. M. [1 ]
Cortes-Hernandez, D. A. [1 ]
Terrones-Maldonado, M. [2 ]
Rodriguez-Pulido, A. [2 ]
Hernandez-Pinero, J. L. [3 ]
机构：
[1] IPN, Ctr Invest & Estudios Avanzados, Unidad Saltillo, Mexico City, DF, Mexico
[2] Inst Potosino Invest Ciencia & Tecnol, San Luis Potosi, Mexico
[3] Univ Autonoma Nuevo Leon, Nuevo Leon, Mexico
来源：
REVISTA DE METALURGIA | 2010年 / 46卷 / 04期
关键词：
Zeolite; Silica; Aluminum; Magnesium; Minerals; MOLTEN ALUMINUM-ALLOYS;
D O I：
10.3989/revmetalm.0949
中图分类号：
TF [冶金工业];
学科分类号：
0806 ;
摘要：
In order to eliminate magnesium from an A 380 Al-Si alloy at 750 degrees C, the submerged powder injection method, using an inert carrier gas (Ar), was applied. The injected powders in the liquid aluminum bath were zeolite, silica and mixtures of zeolite-silica minerals. For each experiment the response variables were: eliminated magnesium versus injection time and quantity of drosses produced. Chemical analysis by atomic absorption spectrometry showed that mixtures of silica-zeolite 66:34 wt% have the best results with regarding to the removal magnesium from 1 to 0.0066 wt%. During the elimination of magnesium complex stoichiometry compounds were formed due to the reactions among zeolite, water steam and liquid aluminum. These compounds were analyzed by XRD, SEM and TEM. The results obtained, along with using the FactSage 6 thermodynamic software, allowed to elucidate the reaction mechanism between the minerals used and liquid aluminum.
引用
收藏
页码：351 / 359
页数：9
相关论文
共 48 条
  • [1] Magnesium Removal from Molten Al-Si Alloys Using Zeolite
    Barrera-Mendez, F.
    Escobedo-Bocardo, J. C.
    Cortes-Hernandez, D. A.
    Almanza-Robles, J. M.
    Munoz-Arroyo, R.
    Hernandez-Garcia, H. M.
    CANADIAN METALLURGICAL QUARTERLY, 2010, 49 (02) : 163 - 170
  • [2] Study on Modification Mechanism of Antimony in Al-Si cast alloys
    Li, Huiling
    Chai, Qiuyan
    NEW AND ADVANCED MATERIALS, PTS 1 AND 2, 2011, 197-198 : 1079 - +
  • [3] Mechanism of enhancing B removal from Si with V addition using Al-Si as the refining solvent
    Chen, Kun
    Chen, Xiuhua
    Lei, Yun
    Ma, Wenhui
    Han, Jiaxian
    Yang, Ziheng
    SEPARATION AND PURIFICATION TECHNOLOGY, 2018, 203 : 168 - 177
  • [4] Investigating material removal mechanism of Al-Si base abradable coating in labyrinth seal system
    Zhang, Boxiu
    Marshall, Matthew
    WEAR, 2019, 426 : 239 - 249
  • [5] Modification of Al-Si alloys by metallothermic reduction using submerged SrO powders injection
    Molina, C. Moreno
    Valdes, A. Flores
    Valdez, R. Muniz
    Torres, J. Torres
    Rosales, N. Rodriguez
    Estrada, R. Guevara
    MATERIALS LETTERS, 2009, 63 (9-10) : 815 - 818
  • [6] The Formation Mechanism and Characterization of Al-Si Master Alloys from Sodium Fluosilicate
    Mahran, Gamal Mohamed Attia
    Omran, Abdel-Nasser Mohamed
    Abu Seif, El-Sayed Sedek
    MATERIALS SCIENCE-MEDZIAGOTYRA, 2020, 26 (02): : 185 - 191
  • [7] An investigative study of Si poisoning in Al-Si alloys using the metallic glass technique
    McKay, BJ
    Schumacher, P
    SOLIDIFICATION OF ALUMINUM ALLOYS, 2004, : 157 - 166
  • [8] Investigating Al-Si base abradable material removal mechanism with axial movement in labyrinth seal system
    Zhang, Boxiu
    Marshall, Matthew
    Lewis, Roger
    WEAR, 2022, 510
  • [9] STRUCTURAL STUDY OF LIQUID AL-SI ALLOYS .1. HYPOEUTECTIC AND EUTECTIC MELTS
    PRIGUNOVA, AG
    MAZUR, VI
    TARAN, YN
    ROSTOVSKAYA, LA
    PERSION, ZV
    KHRISTENKO, TM
    ROMANOVA, AV
    PHYSICS OF METALS, 1984, 5 (01): : 139 - 149
  • [10] Identification of silicon agglomerates in quenched Al-Si hypereutectic alloys from liquid state
    Hernández, FCR
    Sokolowski, JH
    ADVANCED ENGINEERING MATERIALS, 2005, 7 (11) : 1037 - 1043
12345