Rapid fabrication of microdevices using laser direct writing and replica moulding technique

被引：0
|
作者：
Antonczak, A. J. [1 ]
Stepak, B. D. [2 ]
Abramski, K. M. [1 ]
机构：
[1] Wroclaw Univ Technol, Fac Elect Engn, Laser & Fibre Elect Grp, Wyb Wyspianskiego 27, PL-50370 Wroclaw, Poland
[2] Wroclaw Univ Technol, Fac Microsyst Elect & Photon, Wyb Wyspianskiego 27, PL-50370 Wroclaw, Poland
来源：
LASER-BASED MICRO AND NANOPROCESSING X | 2016年 / 9736卷
关键词：
microfluidics; Lab On a Chip; laser micromachining; polydimethylsiloxane PDMS; replica moulding;
D O I：
10.1117/12.2218531
中图分类号：
TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
This paper presents a method that enables fast and low-cost fabrication of microchannels with oval cross-section. The procedure is based on formation of a concave meniscus at the interface between an initially cured PDMS and a polymeric mould fabricated using excimer laser. The replica is formed by expanding gas trapped within the structures of the mould during thermal curing. A second shaping factor is connected with surface phenomena at the interface between the mould, gas and partially cured PDMS. The final shape of the meniscus is determined when the PDMS reaches the high cure extent.
引用
收藏
页数：6
相关论文
共 50 条
  • [21] Direct writing of electronic and sensor materials using a laser transfer technique
    A. Piqué
    D. B. Chrisey
    J. M. Fitz-Gerald
    R. A. McGill
    R. C. Y. Auyeung
    H. D. Wu
    S. Lakeou
    Viet Nguyen
    R. Chung
    M. Duignan
    Journal of Materials Research, 2000, 15 : 1872 - 1875
  • [22] Rapid fabrication of ultra-wear-resistant graphene nanocrystallite film by direct laser writing
    Huang, Zhiquan
    Xue, Peidong
    Chen, Cheng
    Diao, Dongfeng
    APPLIED SURFACE SCIENCE, 2022, 604
  • [23] Fabrication of Flexible Copper Microelectrodes Using Laser Direct Writing for Sensing Applications
    Cheng, Jian
    Liu, Xin
    Kong, Weichang
    Lei, Qingzheng
    Yu, Zhiyu
    Liu, Dun
    PHYSICA STATUS SOLIDI A-APPLICATIONS AND MATERIALS SCIENCE, 2024, 221 (16):
  • [24] Hydrothermal Fabrication of Patterned ZnO Nanorod Clusters using Laser Direct Writing
    Shim, Jaeho
    Kwon, Kyungmook
    Yu, Kyoungsik
    2012 INTERNATIONAL CONFERENCE ON OPTICAL MEMS AND NANOPHOTONICS (OMN), 2012, : 190 - 191
  • [25] Microchannels Fabrication in Alumina Ceramic Using Direct Nd:YAG Laser Writing
    Mohammed, Muneer Khan
    Umer, Usama
    Rehman, Ateekh Ur
    Al-Ahmari, Abdulrahman M.
    El-Tamimi, Abdulaziz M.
    MICROMACHINES, 2018, 9 (08):
  • [26] Fabrication of computer-generated holograms using femtosecond laser direct writing
    Berlich, Rene
    Richter, Daniel
    Richardson, Martin
    Nolte, Stefan
    OPTICS LETTERS, 2016, 41 (08) : 1752 - 1755
  • [27] Fabrication of metal nanostructures in a polymer matrix using femtosecond laser writing technique
    Kuladeep, Rajamudili
    Jyothi, Lankipalli
    Chakradhar, Sahoo
    Rao, Desai Narayana
    OPTICAL ENGINEERING, 2014, 53 (07)
  • [28] Fabrication of submicron proteinaceous structures by direct laser writing
    Serien, Daniela
    Takeuchi, Shoji
    APPLIED PHYSICS LETTERS, 2015, 107 (01)
  • [29] Direct Writing on Phosphate glass using Atomic Force Microscopy for Rapid Fabrication of Nanostructures
    Barna, Shama F.
    Jacobs, Kyle E.
    Mensing, Glennys A.
    Ferreira, Placid M.
    PROCEEDINGS OF THE ASME INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION, 2016, VOL. 10, 2017,
  • [30] Direct Laser Writing Facility for Fabrication of Submicron Mask
    Zhu Feng
    Ma Jian-Yong
    CHINESE PHYSICS LETTERS, 2014, 31 (04)
12345