Effects of Nb additions on the microstructure and mechanical property of CoCrFeNi high-entropy alloys

被引:376
|
作者
Liu, W. H. [1 ,2 ]
He, J. Y. [2 ]
Huang, H. L. [2 ]
Wang, H. [2 ]
Lu, Z. P. [2 ]
Liu, C. T. [1 ]
机构
[1] City Univ Hong Kong, Dept Mech & Biomed Engn, Ctr Adv Struct Mat, Hong Kong, Hong Kong, Peoples R China
[2] Univ Sci & Technol Beijing, State Key Lab Adv Met & Mat, Beijing 10083, Peoples R China
基金
中国国家自然科学基金;
关键词
High entropy alloys; Phase stability; Microstructure; Mechanical properties; SOLID-SOLUTION PHASE; WEAR BEHAVIOR; STABILITY; DIFFUSION; ELEMENTS; MN;
D O I
10.1016/j.intermet.2015.01.004
中图分类号
O64 [物理化学(理论化学)、化学物理学];
学科分类号
070304 ; 081704 ;
摘要
A series of five-component CoCrFeNiNbx high entropy alloys (HEAs) were synthesized to investigate alloying effects of the large atom Nb on the structure and tensile properties. Microstructures of these alloys were examined using scanning electron microscopy and the phase evolution was characterized and compared using the Delta H-mix-delta and Delta X criteria. It was found that the microstructure changes from the initial single face-centered cubic (FCC) to duplex FCC plus hexagonal close-packed (HCP) structure with additions of Nb. The current alloy system exhibits a hypoeutectic structure and the volume fraction of the Nb-enriched Laves phase with the HCP structure increases with increasing the Nb content, which is mainly responsible for the increment in the yield and fracture strength. Particularly, the Nb-0.155 alloy containing a 9.3% Nb-enriched Laves phase exhibits the most promising mechanical properties with the yield strength and plastic strain as high as 321 MPa and 21.3%, respectively. The Delta H-mix-delta criteria well describe the phase selection for the thermally treated alloys, while the physical parameter Delta X fails to predict the appearance of the Nb-enriched Laves phase in this alloy system. (C) 2015 Elsevier Ltd. All rights reserved.
引用
收藏
页码:1 / 8
页数:8
相关论文
共 50 条
  • [21] Nano-/Ultrafine Eutectic in CoCrFeNi(Nb/Ta) High-Entropy Alloys
    Chanda, Barnasree
    Verma, Abhilash
    Das, Jayanta
    TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 2018, 71 (11) : 2717 - 2723
  • [22] Microstructure transition and mechanical property variation of Al0.6CoCrFeNi high-entropy alloys prepared under different cooling rates
    Ma, Lili
    Cao, Tangqing
    Wang, Jianing
    Xue, Yunfei
    Yu, Huinan
    MATERIALS RESEARCH EXPRESS, 2019, 6 (10)
  • [23] Influence of Al, Cu and Mn additions on diffusion behaviors in CoCrFeNi high-entropy alloys
    Chen, Juan
    Zhang, Zhen-zhong
    Xiao, Jin-kun
    Zhang, Li-jun
    TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2025, 35 (01) : 184 - 193
  • [24] Effects of Elements on the Microstructure and Mechanical Properties of AlCoCrFeNiTi High-Entropy Alloys
    Zhang, Jingli
    Xin, Shewei
    Zhang, Yongqiang
    Guo, Ping
    Sun, Huamei
    Li, Ting
    Qin, Cheng
    METALS, 2023, 13 (01)
  • [25] Effects of Ta microalloying on the microstructure and mechanical properties of L12-strengthened CoCrFeNi-AlTi high-entropy alloys
    Qi, Wu
    Yang, Xiao
    Wang, Wenrui
    Peng, Tao
    Zhang, Ya
    Li, Yong
    Zhang, Yong
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2023, 875
  • [26] Correction to: Effect of Si additions on microstructure and mechanical properties of refractory NbTaWMo high-entropy alloys
    Zhiming Guo
    Aijun Zhang
    Jiesheng Han
    Junhu Meng
    Journal of Materials Science, 2019, 54 : 10077 - 10077
  • [27] Effect of Nb on Microstructure and Wear Property of Laser Cladding CoCrFeNiTiNbx High-Entropy Alloys Coatings
    Ding, Lin
    Wang, Hongxin
    Xiumin, Quan
    METALS AND MATERIALS INTERNATIONAL, 2024, 30 (12) : 3418 - 3429
  • [28] Exploring Zr Influence on Microstructure and Mechanical Property in FeCoNiCrCuZr Eutectic High-Entropy Alloys
    Dewangan, Sheetal Kumar
    Jain, Reliance
    Paswan, Manikant
    Patel, Arvind
    Samal, Sumanta
    Kumar, Vinod
    Ahn, Byungmin
    METALS AND MATERIALS INTERNATIONAL, 2024, 30 (12) : 3339 - 3348
  • [29] Microstructure and mechanical properties of FexCoCrNiMn high-entropy alloys
    Zhang, Tao
    Xin, Lijun
    Wu, Fufa
    Zhao, Rongda
    Xiang, Jun
    Chen, Minghua
    Jiang, Songshan
    Huang, Yongjiang
    Chen, Shunhua
    JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY, 2019, 35 (10) : 2331 - 2335
  • [30] Microstructure and mechanical properties of CoCrFeNiTiAlx high-entropy alloys
    Zhang, K. B.
    Fu, Z. Y.
    Zhang, J. Y.
    Wang, W. M.
    Wang, H.
    Wang, Y. C.
    Zhang, Q. J.
    Shi, J.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2009, 508 (1-2): : 214 - 219