Investigation on Mechanical Properties' Anisotropy of Rod Units in Lattice Structures Fabricated by Selective Laser Melting

被引：0
|
作者：
Jing, Chenchen [1 ]
Zhou, Yong [1 ]
Lu, Jiping [1 ]
Fan, Hongli [1 ]
Ji, Lei [1 ]
Li, Penglin [1 ]
机构：
[1] Beijing Inst Technol, Sch Mech Engn, Beijing 100081, Peoples R China
来源：
2017 INTERNATIONAL CONFERENCE ON ELECTRONIC INFORMATION TECHNOLOGY AND COMPUTER ENGINEERING (EITCE 2017) | 2017年 / 128卷
关键词：
ALLOY; MICROSTRUCTURE; OPTIMIZATION; PERFORMANCE; IMPLANTS; TITANIUM;
D O I：
10.1051/matecconf/201712805005
中图分类号：
TP301 [理论、方法];
学科分类号：
081202 ;
摘要：
Lattice structure with high strength and low mass using selective laser melting (SLM) has been a hot topic. However, there are some problems in the fabrication of lattice structure by SLM. Rod unit is the basic component of lattice structure and its performance affects the whole structure. It is necessary to investigate the influence of selective laser melting on rod unit's mechanical properties. A series of rod units with different inclination angle and diameter were fabricated by SLM in this research. And the mechanical properties of these units were measured by tensile test. The results show that the rod units with different diameters and inclination angles have good mechanical properties and show no difference. It is a good news for lattice structure designing for there is no necessary to consider the mechanical properties' anisotropy of rod units.
引用
收藏
页数：4
相关论文
共 50 条
  • [31] Mechanical Properties and Fracture of Austenitic Steel Fabricated by Selective Laser Melting
    M. V. Gerov
    A. G. Kolmakov
    D. V. Prosvirnin
    A. O. Kayasova
    N. S. Zhdanova
    M. E. Prutskov
    Russian Metallurgy (Metally), 2022, 2022 : 1218 - 1226
  • [32] Continuous graded Gyroid cellular structures fabricated by selective laser melting: Design, manufacturing and mechanical properties
    Yang, Lei
    Mertens, Raya
    Ferrucci, Massimiliano
    Yan, Chunze
    Shi, Yusheng
    Yang, Shoufeng
    MATERIALS & DESIGN, 2019, 162 : 394 - 404
  • [33] Influence of processing conditions on strut structure and compressive properties of cellular lattice structures fabricated by selective laser melting
    Qiu, Chunlei
    Yue, Sheng
    Adkins, Nicholas J. E.
    Ward, Mark
    Hassanin, Hany
    Lee, Peter D.
    Withers, Philip J.
    Attallah, Moataz M.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2015, 628 : 188 - 197
  • [34] Comparison of Compression Performance and Energy Absorption of Lattice Structures Fabricated by Selective Laser Melting
    Shi, Xin
    Liao, Wenhe
    Li, Peifeng
    Zhang, Changdong
    Liu, Tingting
    Wang, Cong
    Wu, Jiajing
    ADVANCED ENGINEERING MATERIALS, 2020, 22 (11)
  • [35] Mechanical analysis and modeling of metallic lattice sandwich additively fabricated by selective laser melting
    Wei, Kai
    Yang, Qidong
    Yang, Xujing
    Tao, Yong
    Xie, Haiqiong
    Qu, Zhaoliang
    Fang, Daining
    THIN-WALLED STRUCTURES, 2020, 146
  • [36] Acoustic Properties of 316L Stainless Steel Lattice Structures Fabricated via Selective Laser Melting
    Sun, Xiaojing
    Jiang, Fengchun
    Wang, Jiandong
    METALS, 2020, 10 (01)
  • [37] Mechanical analysis and modeling of metallic lattice sandwich additively fabricated by selective laser melting
    Wei, Kai
    Yang, Qidong
    Yang, Xujing
    Tao, Yong
    Xie, Haiqiong
    Qu, Zhaoliang
    Fang, Daining
    Thin-Walled Structures, 2020, 146
  • [38] Investigation of mechanical properties for open cellular structure CoCrMo alloy fabricated by selective laser melting process
    Azidin, A.
    Taib, Z. A. M.
    Harun, W. S. W.
    Ghani, S. A. Che
    Faisae, M. F.
    Omar, M. A.
    Ramli, H.
    3RD INTERNATIONAL CONFERENCE OF MECHANICAL ENGINEERING RESEARCH (ICMER 2015), 2015, 100
  • [39] Flexural Properties of ARCH Lattice Structures Manufactured by Selective Laser Melting
    Ding, Ruochen
    Yao, Jun
    Du, Baorui
    Li, Kailun
    Pan, Maohua
    Zhao, Lu
    Guo, Yumeng
    ADVANCED ENGINEERING MATERIALS, 2021, 23 (07)
  • [40] Lattice structures and mechanical properties of FeCrNi medium-entropy alloy prepared by selective laser melting
    Sun, Chi
    Wang, Jian
    He, He
    Qin, Dongyang
    Cao, Yuankui
    Fu, Ao
    Liu, Bin
    CAILIAO GONGCHENG-JOURNAL OF MATERIALS ENGINEERING, 2024, 52 (01): : 211 - 219
12345