Study on Impact Fractures of Adhesively Bonded Composite Joints

被引：0
|
作者：
Cho, Jae-Ung [1 ]
Kinloch, Anthony [2 ]
Blackman, Bamber [2 ]
Sanchez, F. S. Rodriguez [2 ]
机构：
[1] Kongju Univ, Dept Mech & Automot Engn, 275 Budae Dong, Cheonan Si 331717, Chungnam, South Korea
[2] Imperial Coll London, Dept Mech Engn, London SW7 2AZ, England
来源：
MULTI-FUNCTIONAL MATERIALS AND STRUCTURES III, PTS 1 AND 2 | 2010年 / 123-125卷
关键词：
Impact fracture; Adhesively bonded composite joints; High rate; Energy release rate; DAMAGE GROWTH; BEHAVIOR;
D O I：
10.4028/www.scientific.net/AMR.123-125.235
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
From the impact experiment for the nonlinear plastic behavior with the dynamically loaded adhesively-bonded TDCB specimens, there is the range of load from 1 to 2 kN or pin displacement from 4 to 10 mm for the most part in case of the impact rates 1, 2.5, 5, 7.5 and 12.5m/s. There is also the range of energy from 5 to 10 J or energy release rate(fracture energy) from 3000 to 6000 J/m(2) for the most part in case of all impact rates. The fracture energy on automotive adhesive joints can be estimated by using the fracture toughness, G(IC), experimental results under high rates of loading in this study. The key fracture mechanics parameter, namely the fracture energy, G(IC), was ascertained as a function of test rate and may be used to assess and model the joint performance.
引用
收藏
页码：235 / +
页数：2
相关论文
共 50 条
  • [21] A study on the impact behavior of adhesively-bonded composite materials
    J. U. Cho
    S. K. Lee
    C. Cho
    F. S. Rodriguez Sanchez
    B. R. K. Blackman
    A. J. Kinloch
    Journal of Mechanical Science and Technology, 2007, 21 : 1671 - 1676
  • [22] A study on the impact behavior of adhesively-bonded composite materials
    Cho, J. U.
    Lee, S. K.
    Cho, C.
    Sanchez, F. S. Rodriguez
    Blackman, B. R. K.
    Kinloch, A. J.
    JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, 2007, 21 (10) : 1671 - 1676
  • [23] Failure analysis of adhesively bonded composite joints under transverse impact and different temperatures
    Sayman, Onur
    Arikan, Volkan
    Dogan, Akar
    Soykok, Ibrahim F.
    Dogan, Tolga
    COMPOSITES PART B-ENGINEERING, 2013, 54 : 409 - 414
  • [24] Mechanical response of adhesively bonded composite joints subjected to vibration load and axial impact
    Kemiklioglu, Ugur
    Baba, Buket Okutan
    COMPOSITES PART B-ENGINEERING, 2019, 176
  • [25] Numerical study on the onset of initiation of debond growth in adhesively bonded composite joints
    Senthil, K.
    Arockiarajan, A.
    Palaninathan, R.
    INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES, 2018, 84 : 202 - 219
  • [26] Study on the durability of film adhesively bonded composite joints subjected to environmental aging
    Alkoc, Ahmetcan
    Yoruc, Afife Binnaz Hazar
    Bakir, Mete
    Usak, Adem Can
    JOURNAL OF REINFORCED PLASTICS AND COMPOSITES, 2025,
  • [27] Effect of Alkali on the Impact Toughness of Adhesively Bonded Joints
    You, Min
    Mei, Chunzhi
    Liu, Wenjun
    Hu, Jingrong
    Wu, Ling
    PROGRESS IN STRUCTURE, PTS 1-4, 2012, 166-169 : 1904 - +
  • [28] A NUMERICAL STUDY OF ADHESIVELY BONDED LAP JOINTS
    CHIU, WK
    JONES, R
    INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES, 1992, 12 (04) : 219 - 225
  • [29] Experimental Research on Shearing Strength of Adhesively Bonded Composite Joints
    Shi, Xin-Hong
    Wang, Kang-Kang
    International Conference on Mechanics, Building Material and Civil Engineering (MBMCE 2015), 2015, : 247 - 251
  • [30] Fracture Behaviour of Adhesively Bonded Joints in Sandwich Composite Beams
    Shahin, Khaled
    Taheri, Farid
    JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY, 2009, 23 (10-11) : 1531 - 1546
12345