Improved Oxidation and Hot Corrosion Resistance of 1Cr11Ni2W2MoV Stainless Steel at 650 °C by a Novel Glass-Ceramic Coating

被引：6

作者：

Chen, Ken ^{[1
]}

Lin, Jiewei ^{[1
]}

Li, Wenfang ^{[1
]}

Zhu, Wen ^{[1
]}

Li, Kang ^{[1
]}

Yi, Aihua ^{[1
]}

Hu, Shaodong ^{[1
]}

Chen, Minghui ^{[2
]}

Wang, Fuhui ^{[2
]}

机构：

[1] Dongguan Univ Technol, Sch Mat Sci & Engn, 1 Daxue Rd, Dongguan 523808, Peoples R China

[2] Northeastern Univ, Shenyang Natl Lab Mat Sci, Sch Mat Sci & Engn, Shenyang 110819, Peoples R China

来源：

CRYSTALS | 2021年 / 11卷 / 10期

基金：

中国国家自然科学基金;

关键词：

glass-ceramics coating; martensitic stainless steel; hot corrosion; oxidation; INITIAL OXIDATION; SELF-DIFFUSION; BEHAVIOR; NACL; CRYSTALLIZATION; SUPERALLOY; KINETICS; ALLOY;

D O I：

10.3390/cryst11101213

中图分类号：

O7 [晶体学];

学科分类号：

0702 ; 070205 ; 0703 ; 080501 ;

摘要：

A novel glass-ceramic coating was applied onto the 1Cr11Ni2W2MoV stainless steel. The oxidation and corrosion behaviors of coated and uncoated steels were comparatively investigated in air and in the presence of NaCl + Na2SO4 eutectic deposits at 650 & DEG;C, respectively. Protective scales formed on the surface of stainless steel prevented the severe oxidation of the alloy. Catastrophic hot corrosion occurred on the steel when a salt film was attached, producing loose iron oxide layers and internal corrosion zone. The glass-ceramic coating acted as a barrier that effectively hindered the invasion of corrosive species during the oxidation and hot corrosion tests.

引用

页数：15

共 50 条

[41] 1Cr11Ni2W2MoV钢制压气机叶片彩虹斑点故障分析
唐恩军
晁国涛
王轶
航空维修与工程, 2018, (10) : 79 - 82
[42] 1Cr11Ni2W2MoV不锈钢气体渗氮工艺研究
王铮
王大宏
张金卓
孙小琪
王占鸿
晁耀杰
费岩晗
金属加工(热加工), 2024, (06) : 23 - 28
[43] 1Cr11Ni2W2MoV闪光对焊接头的组织与性能
王金雪
袁鸿
张国栋
余槐
焊接, 2015, (04) : 58 - 60+76
[44] Friction Stir Welding of 1Cr11Ni2W2MoV Martensitic Stainless Steel: Numerical Simulation Based on Coupled Eulerian Lagrangian Approach Supported with Experimental Work
Ragab, Mohamed
Liu, Hong
Yang, Guan-Jun
Ahmed, Mohamed M. Z.
APPLIED SCIENCES-BASEL, 2021, 11 (07):
[45] 不同热处理制度下1Cr11Ni2W2MoV钢螺栓断裂特性
徐锐
单金光
戴玮高
张华
金属热处理, 2013, 38 (09) : 89 - 91
[46] 酸性环境中1Cr11Ni2W2MoV不锈钢的腐蚀行为
孟波
王凯
北京石油化工学院学报, 2008, (01) : 35 - 38
[47] 1Cr11Ni2W2MoV耐热不锈钢铣削工艺参数优化研究
王启家
牛孝霞
叶超
黄文涛
郑耀辉
制造业自动化, 2025, 47 (03) : 71 - 76
[48] 1Cr11Ni2W2MoV钢长期时效时组织性能的变化
王蓉
严隽民
材料工程, 1990, (02) : 8 - 11
[49] 1Cr11Ni2W2MoV钢激光冲击强化后渗铝工艺研究
李玉琴
何卫锋
李应红
王学德
龙霓东
刘海雷
中国激光, 2011, 38 (07) : 126 - 130
[50] 1Cr11Ni2W2MoV钢后轴颈模压件锻造裂纹的分析
陈为山
航空材料, 1979, (02) : 30 - 36

← 1 2 3 4 5 →