Deformation-induced phase transformation and twinning in Fe and Fe-C alloys

被引:3
|
作者
Yang, Yang [1 ]
Zhang, Hao [1 ]
Ou, Xiaoqin [1 ]
Gu, Ji [1 ]
Song, Min [1 ]
机构
[1] Cent South Univ, State Key Lab Powder Met, Changsha 410083, Peoples R China
基金
中国国家自然科学基金;
关键词
Phase transformation; twinning; tensile deformation; Fe and Fe-C alloy; molecular dynamics simulation; MARTENSITIC-TRANSFORMATION; MECHANICAL-PROPERTIES; CARBON CONTENT; VARIANT SELECTION; LATH MARTENSITE; AUSTENITE; STEELS; MICROSTRUCTURE; TRANSITION; PLASTICITY;
D O I
10.1080/02670836.2021.1992948
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
The phase transformations and twinning in a nano-sized face-centred cubic (FCC) crystal of iron with different carbon contents are studied by molecular dynamic (MD) simulations. The simulation cells are stretched uniaxially along the [100](FCC) direction. It is found that the FCC matrix transforms into the body-centred cubic (BCC) phase following the Nishiyama-Wassermann orientation relationship (OR). Then, the 'BCC <-> hexagonal close-packed (HCP)' and 'BCC <-> FCC' transformations occur following different variants of the Burgers OR and the Pitsch OR, respectively. The {112}(BCC) twins form between two neighbouring BCC grains. Additionally, the carbon atoms can destabilise the BCC phase, inhibit the phase transformation and pin phase interfaces, leading to tiny BCC twins.
引用
收藏
页码:1246 / 1256
页数:11
相关论文
共 50 条
  • [41] Deformation-induced dissolution of borides in FCC Fe-Ni alloys
    Shabashov, V. A.
    Litvinov, A. V.
    Lyashkov, K. A.
    Kataeva, N. V.
    Novikov, S. I.
    Titova, S. G.
    HIGH PRESSURE RESEARCH, 2011, 31 (04) : 620 - 633
  • [42] EFFECTS OF DEFORMATION INDUCED PHASE-TRANSFORMATION AND TWINNING ON THE MECHANICAL-PROPERTIES OF AUSTENITIC FE-MN-AL ALLOYS
    SATO, K
    ICHINOSE, M
    HIROTSU, Y
    INOUE, Y
    ISIJ INTERNATIONAL, 1989, 29 (10) : 868 - 877
  • [43] Phase transformation of Fe-Rh alloys induced by high speed deformation
    Oshima, R
    Fukuzumi, M
    Hori, F
    Komatsu, M
    Kiritani, M
    JAPAN INSTITUTE OF METALS, PROCEEDINGS, VOL 12, (JIMIC-3), PTS 1 AND 2: SOLID - SOLID PHASE TRANSFORMATIONS, 1999, : 981 - 984
  • [44] Microstructural evolution and nanocrystal formation during deformation of Fe-C alloys
    Liu, ZG
    Fecht, HJ
    Umemoto, M
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2004, 375 (1-2 SPEC. ISS.): : 839 - 843
  • [45] Phase-field model for solidification of Fe-C alloys
    Ode, M.
    Suzuki, T.
    Kim, S. G.
    Kim, W. T.
    SCIENCE AND TECHNOLOGY OF ADVANCED MATERIALS, 2000, 1 (01) : 43 - 49
  • [46] A new deformation mechanism in nanoscale Fe-C composite as a result of a stress-induced α→γ transformation
    Ivanisenko, Y
    MacLaren, I
    Valiev, RZ
    Fecht, HJ
    NANOMATERIALS BY SEVERE PLASTIC DEFORMATION, 2006, 503-504 : 439 - 445
  • [47] DEFORMATION AND TRANSFORMATION TWINNING MODES IN FE-NI AND FE-NI-C MARTENSITES
    BEVIS, M
    ROWLANDS, PC
    ACTON, AF
    TRANSACTIONS OF THE METALLURGICAL SOCIETY OF AIME, 1968, 242 (08): : 1555 - &
  • [48] ROLE OF STRAIN ON DEFORMATION-INDUCED MARTENSITIC-TRANSFORMATION IN AN FE-NI-C ALLOY
    ONODERA, H
    OKA, H
    TAMURA, I
    JOURNAL OF THE JAPAN INSTITUTE OF METALS, 1978, 42 (09) : 898 - 905
  • [49] Aligned two-phase structures in Fe-C alloys
    Shimotomai, M
    Maruta, K
    SCRIPTA MATERIALIA, 2000, 42 (05) : 499 - 503
  • [50] Analysis of strengthening due to deformation-induced martensitic transformation in a Fe-Ni-C steel
    Takimoto, Akio
    Yoshinaka, Shinji
    Nakamichi, Yoshihiro
    Nippon Kikai Gakkai Ronbunshu, A Hen/Transactions of the Japan Society of Mechanical Engineers, Part A, 1990, 56 (521): : 113 - 119