Numerical Study of Thermal Performance of Phase Change Material-based Heat Sinks with Three-dimensional Transient Cooling

被引：0
|
作者：
Jeong, Ju-Ho [1 ]
Lee, Jin Hyun [2 ]
Kim, Sung-Min [1 ]
机构：
[1] Sungkyunkwan Univ, Sch Mech Engn, 300 Cheoncheon Dong, Suwon 16419, South Korea
[2] Sungkyunkwan Univ, Polymer Technol Inst, 300 Cheoncheon Dong, Suwon 16419, South Korea
来源：
SENSORS AND MATERIALS | 2018年 / 30卷 / 11期
基金：
新加坡国家研究基金会;
关键词：
phase change material (PCM); paraffin wax; heat sink; melting; INTERNAL FINS; MANAGEMENT; VOLUME;
D O I：
10.18494/SAM.2018.1974
中图分类号：
TH7 [仪器、仪表];
学科分类号：
0804 ; 080401 ; 081102 ;
摘要：
A three-dimensional numerical model is constructed to examine the thermal performance of a phase change material (PCM)-based heat sink. The PCM is stored in a rectangular heat sink and a uniform heat flux is applied at the bottom of the heat sink. The PCM used in this model is paraffin wax and the heat sink is made of aluminum. Numerical transient simulations are conducted with different power levels (15, 20, and 25 W). As the power level increases, the melting rate increases and the melting time decreases. The convection of liquid PCM is observed by monitoring the temperature and velocity vector inside the PCM. During the melting process, the convection effect is enhanced by increasing the amount of molten PCM.
引用
收藏
页码：2391 / 2400
页数：10
相关论文
共 50 条
  • [41] Material-based three-dimensional imaging with nanostructured surfaces
    Nazirizadeh, Yousef
    Reverey, Julia
    Geyer, Ulf
    Lemmer, Uli
    Selhuber-Unkel, Christine
    Gerken, Martina
    APPLIED PHYSICS LETTERS, 2013, 102 (01)
  • [42] Investigation of thermal comfort conditions by heat pump Hybridized with phase change Material-based solar desiccant cooling system
    Bozorgi, Mehran
    Ghasemi, Kasra
    Tasnim, Syeda Humaira
    Mahmud, Shohel
    APPLIED THERMAL ENGINEERING, 2023, 232
  • [43] Phase change material-based thermal energy storage
    Yang, Tianyu
    King, William P.
    Miljkovic, Nenad
    CELL REPORTS PHYSICAL SCIENCE, 2021, 2 (08):
  • [44] Three-dimensional transient numerical model for the thermal performance of the solar receiver
    Xu, Li
    Stein, Wesley
    Kim, Jin-Soo
    Wang, Zhifeng
    RENEWABLE ENERGY, 2018, 120 : 550 - 566
  • [45] A comparative study and optimization of phase change material based heat sinks for thermal management of electronic components
    Kumar, Anuj
    Kothari, Rohit
    Sahu, Santosh K.
    Kundalwal, Shailesh, I
    JOURNAL OF ENERGY STORAGE, 2021, 43
  • [46] Performance study of phase change materials coupled with three-dimensional oscillating heat pipes with different structures for electronic cooling
    Ling, Yun-Zhi
    Zhang, Xiao-Song
    Wang, Feng
    She, Xiao-Hui
    RENEWABLE ENERGY, 2020, 154 (154) : 636 - 649
  • [47] Three dimensional numerical study of heat-transfer enhancement by nano-encapsulated phase change material slurry in microtube heat sinks with tangential impingement
    Seyf, Hamid Reza
    Zhou, Zhou
    Ma, H. S.
    Zhang, Yuwen
    INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2013, 56 (1-2) : 561 - 573
  • [48] Thermal performance of pin fin heat sinks with phase change material for electronic devices thermal management
    Li, Jie
    Duan, Wenchao
    Chen, Yuehao
    Chen, Huilan
    Song, Mengjie
    Liao, Shuguang
    Shi, Er
    Sun, Xiaoqin
    APPLIED THERMAL ENGINEERING, 2024, 250
  • [49] Three-dimensional simulation of the thermal performance of porous building brick impregnated with phase change material
    Khedher, Nidhal Ben
    Nasrallah, Sassi Ben
    International Journal of Heat and Technology, 2014, 32 (1-2) : 163 - 169
  • [50] Experimental investigations on phase change material based finned heat sinks for electronic equipment cooling
    Baby, Rajesh
    Balaji, C.
    INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2012, 55 (5-6) : 1642 - 1649
12345