Strengthening and Room Temperature Age-Softening of Super-Light Mg-Li Alloys

被引:34
|
作者
Leu, Jyh-Shyan [1 ]
Chiang, Chih-Te [1 ]
Lee, Shyong [1 ]
Chen, Yung-Hung [2 ]
Chu, Chun-Lin [1 ]
机构
[1] Natl Cent Univ, Dept Mech Engn, Jhongli 32001, Taiwan
[2] Chun Shan Inst Sci & Technol, Longtan 32546, Taiwan
关键词
treating; non-ferrous metals; rolling; MECHANICAL-PROPERTIES; MICROSTRUCTURES;
D O I
10.1007/s11665-010-9606-4
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
Extremely light (density similar to 1.46 g/cm(3)) and highly formable Mg-Li alloys have been drawing research interest; however, their relatively low strength is discouraging, and thus, an issue to be addressed. This paper processes and evaluates four Mg-Li alloys: the first, a basic alloy with a nominal composition of Mg-11%Li-1%Al-0.5%Zn; the second, an alloy with only Be added to the first; the third, an alloy with only Sc added to the first; and the fourth, with both Be and Sc added to the first. This research achieves a high strength of similar to 240 MPa for Mg-Li alloys using the processes of solid solution treatment plus 90% heavy rolling. A subsequent natural aging process proceeded spontaneously and resulted in strength decay. Room temperature softening behavior is uncommon, but offers a convenient route for studying age-softening characteristics of metallic alloys.
引用
收藏
页码:1235 / 1239
页数:5
相关论文
共 32 条
  • [21] Strengthening mechanisms of indirect-extruded Mg-Sn based alloys at room temperature
    Cheng, Wei Li
    Tian, Quan Wei
    Yu, Hui
    Zhang, Hua
    You, Bong Sun
    JOURNAL OF MAGNESIUM AND ALLOYS, 2014, 2 (04) : 299 - 304
  • [22] Improving tensile-shear strength of friction stir lap welded joints of light-weight Mg-Li/Mg–Al-Zn alloys
    Huankun Deng
    Yuming Xie
    Xiangchen Meng
    Huizi Chen
    Ranzhuoluo Zang
    Yuexin Chang
    Xuan Li
    Long Wan
    Yongxian Huang
    Welding in the World, 2022, 66 : 1775 - 1780
  • [23] Improving tensile-shear strength of friction stir lap welded joints of light-weight Mg-Li/Mg-Al-Zn alloys
    Deng, Huankun
    Xie, Yuming
    Meng, Xiangchen
    Chen, Huizi
    Zang, Ranzhuoluo
    Chang, Yuexin
    Li, Xuan
    Wan, Long
    Huang, Yongxian
    WELDING IN THE WORLD, 2022, 66 (09) : 1775 - 1780
  • [24] Tribo-induced surface deformation mechanisms govern friction and wear in ultra-light HCP and duplex Mg-Li alloys
    Yang, Yue
    Meng, Ao
    Chen, Xiang
    Zhao, Yonghao
    WEAR, 2022, 510
  • [25] The solution and room temperature aging behavior of Mg-9Li-xAl(x=3, 6) alloys
    Qu, Zhikun
    Wu, Ruizhi
    Zhan, Haibo
    Zhang, Milin
    JOURNAL OF ALLOYS AND COMPOUNDS, 2012, 536 : 145 - 149
  • [26] Room Temperature Strengthening and High-Temperature Superplasticity of Mg-Li-Al-Sr-Y Alloy Fabricated by Asymmetric Rolling and Friction Stir Processing
    Cao, Furong
    Xiang, Chao
    Kong, Shuting
    Guo, Nanpan
    Shang, Huihui
    MATERIALS, 2023, 16 (06)
  • [27] Modelling the Effect of Room Temperature Storage and Deformation on the Age-hardening Behaviour of Al-Mg-Si alloys
    Schaefer, C.
    Myhr, O. R.
    Liang, Z.
    Brinkman, H. J.
    Engler, O.
    Hirsch, J.
    Chang, C.
    Banhart, J.
    PROCEEDINGS OF THE 13TH INTERNATIONAL CONFERENCE ON ALUMINUM ALLOYS (ICAA13), 2012, : 325 - 330
  • [28] Fabrication of Ti-N and Ti-Al-N Coatings on Mg-Li Alloy by Surface Mechanical Nanoalloying Treatment under Nitrogen Atmosphere at Room Temperature
    Chen, Zhuo
    Tian, Yun-Fei
    Sun, Jian
    Yang, Xue
    Du, Xiao-Dong
    ADVANCED ENGINEERING MATERIALS, 2023, 25 (09)
  • [29] An Extended Age-Hardening Model for Al-Mg-Si Alloys Incorporating the Room-Temperature Storage and Cold Deformation Process Stages
    Myhr, Ole Runar
    Grong, Oystein
    Schaefer, Carmen
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2015, 46A (12): : 6018 - 6039
  • [30] An Extended Age-Hardening Model for Al-Mg-Si Alloys Incorporating the Room-Temperature Storage and Cold Deformation Process Stages
    Ole Runar Myhr
    Øystein Grong
    Carmen Schäfer
    Metallurgical and Materials Transactions A, 2015, 46 : 6018 - 6039