Fabrication of New Internal Tin Nb3Sn Wire Using Sn-Zn Alloy as Sn Core

被引：0
|
作者：
Morita, Taro [1 ,2 ]
Yagai, Tsuyoshi [1 ]
Banno, Nobuya [2 ]
机构：
[1] Sophia Univ, Tokyo 1028554, Japan
[2] Natl Inst Mat Sci, Tsukuba, Ibaraki 3050047, Japan
来源：
IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY | 2020年 / 30卷 / 04期
关键词：
Cu-Ti; diffusion reaction; internal-tin; Nb3Sn; Sn-Zn; PARTICLE ACCELERATOR; FUSION; LAYERS;
D O I：
10.1109/TASC.2020.2971451
中图分类号：
TM [电工技术]; TN [电子技术、通信技术];
学科分类号：
0808 ; 0809 ;
摘要：
We proposed a new configuration for the precursor of Zn-added internal tin (IT) Nb 3 Sn wires, where Zn is added to Sn core and Ti is doped to Cu matrix. The aim is to avoid a Sn-Ti compound layer forming at the Nb filament pack, when one dopes Ti to Sn cores, while maintaining Zn effects such as promotion of Nb 3Sn layer formation: Sn-Ti compound layer could be often a factor to yield inhomogeneous Sn and Ti distribution in the Nb filament modules. We here studied the microstructure and the Jc characteristic of IT wires fabricated using Sn-Zn/CuTi/Nb composite. Use of Sn-Zn core is also effective to increase the hardness of Sn cores about 2 times higher than that of pure Sn core. In Sn-Zn/Cu-Ti/Nb composite samples, the Sn-Ti compound layer was found to be significantly suppressed, compared with Sn-Ti/Cu-Zn/Nb composite samples, which resulted in better Sn andTi distributions. Zn diffusion rate across theCu matrix appears to be so fast that Zn can almost diffuse to the other barrier by the heat treatment at 550 degrees C. Therefore, it is expected to gain the similar effect of Zn addition even for the wires that are made using the Sn-Zn/Cu-Ti/Nb composite, to the Sn-Ti/Cu-Zn/Nb composite wires.
引用
收藏
页数：5
相关论文
共 50 条
  • [31] DIFFUSION OF NB AND SN IN POLYCRYSTALLINE NB3SN
    KNOX, RD
    WRIGHT, RN
    JOURNAL OF METALS, 1984, 36 (07): : 36 - 36
  • [32] Microstructural investigation of internal-tin Nb3Sn strands
    Peng, X
    Sumption, MD
    Tomsic, M
    Gregory, E
    Collings, EW
    IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY, 2005, 15 (02) : 3422 - 3425
  • [33] Optimized heat treatment of internal tin Nb3Sn strands
    Fillunger, H
    Foitl, M
    Hense, K
    Kajgana, I
    Kasztler, A
    Kirchmayr, H
    Lackner, R
    Leoni, J
    Maix, R
    Müller, M
    IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY, 2002, 12 (01) : 1049 - 1051
  • [34] NB3SN SUPERCONDUCTING CABLES PROCESSED BY INTERNAL TIN DIFFUSION
    YOSHIZAKI, K
    TAGUCHI, O
    FUJIWARA, F
    IMAIZUMI, M
    WAKATA, M
    HASHIMOTO, Y
    WAKAMOTO, K
    YAMADA, T
    SATOW, T
    IEEE TRANSACTIONS ON MAGNETICS, 1983, 19 (03) : 1131 - 1134
  • [35] Studies on New Internal Tin Processed Nb3Sn Wires with Brass Matrix
    Tachikawa, Kyoji
    Banno, Nobuya
    Miyamoto, Yasuo
    JOURNAL OF THE JAPAN INSTITUTE OF METALS AND MATERIALS, 2016, 80 (07) : 480 - 486
  • [36] A NEW INTERNAL TIN NB3SN CONDUCTOR MADE BY A NOVEL MANUFACTURING PROCESS
    OZERYANSKY, GM
    GREGORY, E
    IEEE TRANSACTIONS ON MAGNETICS, 1991, 27 (02) : 1755 - 1758
  • [37] New Fabrication Process of Cu–Nb Composite for Internal Reinforcement of Nb3Sn Wires
    H. Oguro
    S. Awaji
    K. Watanabe
    M. Sugimoto
    H. Tsubouchi
    Journal of Superconductivity and Novel Magnetism, 2013, 26 : 2099 - 2101
  • [38] Fabrication and characterization of internal Sn and bronze-processed Nb3Sn strands for ITER application
    Zhang, P. X.
    Li, J. F.
    Liu, J. W.
    Li, C. G.
    Zhang, K.
    Tang, X. D.
    Feng, Y.
    Liu, X. H.
    Li, C. S.
    Wu, Y.
    Zhou, L.
    SUPERCONDUCTOR SCIENCE & TECHNOLOGY, 2010, 23 (03):
  • [39] FABRICATION OF NB3SN SUPERCONDUCTORS BY THE SOLID-LIQUID DIFFUSION METHOD USING SN RICH CUSN ALLOY
    YAMASAKI, H
    KIMURA, Y
    CRYOGENICS, 1982, 22 (02) : 89 - 93
  • [40] Improved Superconducting Nb3Sn Wire using Nb(Ti), Sn(Ga), Cu, and Ag Powders
    Thieme, C. L. H.
    Foner, S.
    IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY, 1993, 3 (01) : 1326 - 1329
12345