Characterization and application of porous Ti3SiC2 ceramic prepared through reactive synthesis

被引：52
|
作者：
Liu, Xinli [1 ]
Zhang, Huibin [1 ]
Jiang, Yao [1 ]
He, Yuehui [1 ]
机构：
[1] Cent S Univ, State Key Lab Powder Met, Changsha 410083, Hunan, Peoples R China
来源：
MATERIALS & DESIGN | 2015年 / 79卷
关键词：
Ti3SiC2; Porous; Reactive synthesis; Corrosion; Filter; TI/SI/TIC POWDERS; CARBIDE TI3SIC2; TEMPERATURE; MEMBRANES; FABRICATION;
D O I：
10.1016/j.matdes.2015.03.061
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Porous ternary compound Ti3SiC2 with purity of higher than 99.0 wt.% was fabricated through a reactive synthesis method using titanium hydride, silicon and graphite elemental powders. The parameters of pore structure including the maximum pore size, open porosity and air permeability, obey the Hagen-Poiseuille formula with the constant G = 0.226 m(-1) Pa-1 s(-1) for the reactively synthesized porous Ti3SiC2. The porous Ti3SiC2 shows excellent corrosion resistance in concentrated acids. Further, a typical filter application in zinc metallurgy has been reported. The excellent overall performance predicts the porous Ti3SiC2 material has a broad application in industry. (C) 2015 Elsevier Ltd. All rights reserved.
引用
收藏
页码：94 / 98
页数：5
相关论文
共 50 条
  • [31] Long time oxidation study of Ti3SiC2,Ti3SiC2/SiC, and Ti3SiC2/TiC composites in air
    Barsoum, MW
    Ho-Duc, LH
    Radovic, M
    El-Raghy, T
    JOURNAL OF THE ELECTROCHEMICAL SOCIETY, 2003, 150 (04) : B166 - B175
  • [32] Synthesis of Ti3SiC2 ceramics by reactive sintering and its growth mechanism
    Yang, Feng
    Li, Changsheng
    Tang, Hua
    Zhu, Bingying
    Gao, Qingxia
    Liu, Jinyinzi
    Hu, Zhili
    Zhenkong Kexue yu Jishu Xuebao/Journal of Vacuum Science and Technology, 2012, 32 (09): : 825 - 829
  • [33] Synthesis of High Purity Ti3SiC2 Powders with Pressureless Reactive Sintering
    Yang Feng
    Li Chang-Sheng
    Tang Hua
    Gao Qing-Xia
    Tang Guo-Gang
    Zhu Bing-Ying
    Cao Ke-Sheng
    CHINESE JOURNAL OF INORGANIC CHEMISTRY, 2012, 28 (04) : 703 - 709
  • [34] Microstructure and mechanical properties of porous Ti3SiC2
    Sun, ZM
    Murugaiah, A
    Zhen, T
    Zhou, A
    Barsoum, MW
    ACTA MATERIALIA, 2005, 53 (16) : 4359 - 4366
  • [35] Preparation and characterization of Ti3SiC2 powder
    Li, H
    Peng, LM
    Gong, M
    Zhao, JH
    He, LH
    Guo, CY
    CERAMICS INTERNATIONAL, 2004, 30 (08) : 2289 - 2294
  • [36] Synthesis and characterization of nanocrystalline diamond thin film on Ti3SiC2
    Yang, Songlan
    Yang, Qiaoqin
    Sun, Zhengming
    NANOTECHNOLOGY, 2007, 18 (06)
  • [37] Synthesis of highly dense Ti3SiC2 by HIP and its characterization
    Gao, Ning-Feng
    Miyamoto, Yoshinari
    Tanihata, Kimiaki
    Zairyo/Journal of the Society of Materials Science, Japan, 1998, 47 (10): : 994 - 999
  • [38] Carbosilicothermic Synthesis of Ti3SiC2–TiB2–SiC Ceramic Composites from Leucoxene Concentrate
    P. V. Istomin
    I. M. Belyaev
    E. I. Istomina
    A. V. Nadutkin
    V. E. Grass
    Inorganic Materials, 2021, 57 : 308 - 315
  • [39] The anomalous flow behaviour in the layered Ti3SiC2 ceramic
    Sun, ZM
    Zhou, YC
    Zhou, J
    PHILOSOPHICAL MAGAZINE LETTERS, 2000, 80 (05) : 289 - 293
  • [40] Dual tribological behavior of a nanolayered ceramic:: Ti3SiC2
    Souchet, A
    Fontaine, J
    Belin, M
    Le Mogne, T
    Loubet, JL
    Barsoum, MW
    MECHANICAL PROPERTIES DERIVED FROM NANOSTRUCTURING MATERIALS, 2003, 778 : 177 - 182
12345