Characterization of Al Skeletal Structures Fabricated by Ultrasonic Powder Consolidation

被引：2

作者：

Huang, Zhequn ^{[1
]}

Date, Kenji ^{[2
]}

Tatsugawa, Kiyoshi ^{[2
]}

Ando, Teiichi ^{[1
]}

机构：

[1] Northeastern Univ, Dept Mech & Ind Engn, Boston, MA 02115 USA

[2] Hitachi Met Ltd, Met Res Lab, Yasugi, Shimane, Japan

来源：

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE | 2018年 / 49A卷 / 12期

关键词：

ALUMINUM FOAM; TEMPERATURE; DEFORMATION; MANUFACTURE; DISLOCATION; INTERFACE; DIFFUSION; METALS;

D O I：

10.1007/s11661-018-4901-z

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Skeletal aluminum structures were fabricated by ultrasonic powder consolidation (UPC) of NaCl15masspct Al and NaCl20masspct Al composites at 723K and 773K (450 degrees C and 500 degrees C) for 4seconds and subsequent leaching of the spacer NaCl from the composites by dissolution in water. Ultrasonically consolidated skeletal specimens withstood ultrasonic washing in water, whereas control specimens fabricated under identical conditions, but without ultrasonic vibration, were severely disintegrated. Scanning electron microscopy and mass analysis indicated full removal of NaCl from the UPC specimens. Scanning transmission electron microscopy confirmed full densification and metallurgical bonding in the cell walls of UPC specimens consolidated at 773K (500 degrees C). The mechanisms of rapid densification and bonding in the Al cell walls were elucidated based on microstructural changes during UPC.

引用

页码：6173 / 6184

页数：12

共 50 条

[21] Use of ultrasonic consolidation for fabrication of multi-material structures
Ram, G. D. Janaki
Robinson, C.
Yang, Y.
Stucker, B. E.
RAPID PROTOTYPING JOURNAL, 2007, 13 (04) : 226 - 235
[22] Homogenization of Biporous Agglomerated Powder Structures during Higherature Consolidation
Olevsky, Eugene A. (eolevsky@mail.sdsu.edu), 1600, Blackwell Publishing Inc., Postfach 10 11 61, 69451 Weinheim, Boschstrabe 12, 69469 Weinheim, Deutschland, 69469, Germany (98):
[23] Consolidation by MF-ERS of mechanically alloyed Al powder
Caballero, E. S.
Ternero, F.
Astacio, R.
Cuevas, F. G.
Montes, J. M.
Cintas, J.
JOURNAL OF ALLOYS AND COMPOUNDS, 2019, 792 : 529 - 535
[24] HIP CONSOLIDATION OF ATTRITION MILLED TI-AL POWDER
NIEMI, AN
JOURNAL OF METALS, 1988, 40 (07): : A44 - A45
[25] Processing characterization of binary Mg-Zn alloys fabricated by a new powder consolidation combined severe plastic deformation method
Torabi, H.
Faraji, G.
Masoumi, A.
JOURNAL OF ALLOYS AND COMPOUNDS, 2020, 832 (832)
[26] Electrochemical behaviour of Ti6Al4V porous structures fabricated by powder metallurgy route
Singh, Maninder
Gill, Amoljit Singh
Deol, Parneet Kaur
JOURNAL OF ELECTROCHEMICAL SCIENCE AND ENGINEERING, 2024, 14 (04): : 473 - 486
[27] IGNITION CHARACTERISTICS OF ALUMINUM-NICKEL HETEROSTRUCTURES PRODUCED BY ULTRASONIC POWDER CONSOLIDATION
Erdeniz, Dinc
Gulsoy, Gokce
Colanto, David
Ando, Teiichi
TMS 2010 139TH ANNUAL MEETING & EXHIBITION - SUPPLEMENTAL PROCEEDINGS, VOL 1: MATERIALS PROCESSING AND PROPERTIES, 2010, : 729 - 736
[28] Thermo-mechanical finite element analysis of ultrasonic powder consolidation process
Bhaysar, Shripal
James, Sagil
ADDITIVE MANUFACTURING, 2018, 21 : 705 - 712
[29] ULTRASONIC TISSUE CHARACTERIZATION OF SKELETAL-MUSCLE
CADY, EB
GARDENER, JE
EDWARDS, RHT
EUROPEAN JOURNAL OF CLINICAL INVESTIGATION, 1983, 13 (06) : 469 - 473
[30] Consolidation of Al2O3/Al Nanocomposite Powder by Cold Spray
Dominique Poirier
Jean-Gabriel Legoux
Robin A. L. Drew
Raynald Gauvin
Journal of Thermal Spray Technology, 2011, 20 : 275 - 284

← 1 2 3 4 5 →