Characterization of Al Skeletal Structures Fabricated by Ultrasonic Powder Consolidation

被引：2

作者：

Huang, Zhequn ^{[1
]}

Date, Kenji ^{[2
]}

Tatsugawa, Kiyoshi ^{[2
]}

Ando, Teiichi ^{[1
]}

机构：

[1] Northeastern Univ, Dept Mech & Ind Engn, Boston, MA 02115 USA

[2] Hitachi Met Ltd, Met Res Lab, Yasugi, Shimane, Japan

来源：

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE | 2018年 / 49A卷 / 12期

关键词：

ALUMINUM FOAM; TEMPERATURE; DEFORMATION; MANUFACTURE; DISLOCATION; INTERFACE; DIFFUSION; METALS;

D O I：

10.1007/s11661-018-4901-z

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Skeletal aluminum structures were fabricated by ultrasonic powder consolidation (UPC) of NaCl15masspct Al and NaCl20masspct Al composites at 723K and 773K (450 degrees C and 500 degrees C) for 4seconds and subsequent leaching of the spacer NaCl from the composites by dissolution in water. Ultrasonically consolidated skeletal specimens withstood ultrasonic washing in water, whereas control specimens fabricated under identical conditions, but without ultrasonic vibration, were severely disintegrated. Scanning electron microscopy and mass analysis indicated full removal of NaCl from the UPC specimens. Scanning transmission electron microscopy confirmed full densification and metallurgical bonding in the cell walls of UPC specimens consolidated at 773K (500 degrees C). The mechanisms of rapid densification and bonding in the Al cell walls were elucidated based on microstructural changes during UPC.

引用

页码：6173 / 6184

页数：12

共 50 条

[1] Characterization of Al Skeletal Structures Fabricated by Ultrasonic Powder Consolidation
Zhequn Huang
Kenji Date
Kiyoshi Tatsugawa
Teiichi Ando
Metallurgical and Materials Transactions A, 2018, 49 : 6173 - 6184
[2] CHARACTERIZATION OF Al-Ni COMPOSITES PRODUCED BY ULTRASONIC POWDER CONSOLIDATION
Erdeniz, Dinc
Ando, Teiichi
TMS2011 SUPPLEMENTAL PROCEEDINGS, VOL 1: MATERIALS PROCESSING AND ENERGY MATERIALS, 2011, : 553 - 559
[3] Ultrasonic powder consolidation of metallic glass/Al-6061 composites
Wang, Jiahao
Liu, Senji
Huang, Pengyu
Liu, Junsheng
Zhang, Yu
Liang, Xiong
Sohrabi, Sajad
Ma, Jiang
INTERMETALLICS, 2024, 174
[4] Structure and Tribomechanical Properties of Polymer Compacts Fabricated by Ultrasonic Consolidation and Compression Moulding of UHMWPE Powder
Dvilis, E. S.
Panin, S. V.
Alexenko, V. O.
Kornienko, L. A.
Buslovich, D. G.
Tolkachev, O. S.
Ovechkin, B. B.
Alishin, T. R.
PROCEEDINGS OF THE ADVANCED MATERIALS WITH HIERARCHICAL STRUCTURE FOR NEW TECHNOLOGIES AND RELIABLE STRUCTURES, 2018, 2051
[5] Ignition characteristics of hybrid Al-Ni-Fe2O3 and Al-Ni-CuO reactive composites fabricated by ultrasonic powder consolidation
Hashemabad, Somayeh Gheybi
Ando, Teiichi
COMBUSTION AND FLAME, 2015, 162 (04) : 1144 - 1152
[6] An investigation of the mechanical properties and bonding mechanism of Ti/Al-laminated composites fabricated by ultrasonic consolidation
Bo, Jiang
Xueping, Ren
Yujie, Han
Hongliang, Hou
Yaoqi, Wang
COMPOSITES AND ADVANCED MATERIALS, 2021, 30
[7] Characterization of Ta-Ni-Al energetic structural material fabricated by explosive consolidation
Hu, Qiwen
Liu, Rui
Zhou, Qiang
Geng, Hengheng
Ge, Chao
Wang, Haifu
Xiao, Chuan
Chen, Pengwan
JOURNAL OF ALLOYS AND COMPOUNDS, 2022, 924
[8] Mechanisms of Densification and Bonding in the Ultrasonic Consolidation of Aluminum Powder
Huang, Huang
Ando, Teiichi
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2022, 53 (08): : 2797 - 2810
[9] Mechanisms of Densification and Bonding in the Ultrasonic Consolidation of Aluminum Powder
Huang Huang
Teiichi Ando
Metallurgical and Materials Transactions A, 2022, 53 : 2797 - 2810
[10] MOLECULAR DYNAMICS SIMULATION STUDY OF ULTRASONIC POWDER CONSOLIDATION PROCESS
James, Sagil
Rajanna, Prashanth
PROCEEDINGS OF THE ASME 13TH INTERNATIONAL MANUFACTURING SCIENCE AND ENGINEERING CONFERENCE, 2018, VOL 4, 2018,

← 1 2 3 4 5 →