Optimization of heat treatment conditions of magnesium cast alloys

被引：18
|
作者：
Dobrzanski, L. A. [1 ]
Tanski, T. [1 ]
Trzaska, J. [1 ]
机构：
[1] Silesian Tech Univ, Inst Engn Mat & Biomat, PL-44100 Gliwice, Poland
来源：
THERMEC 2009, PTS 1-4 | 2010年 / 638-642卷
关键词：
Magnesium alloys; Heat treatment; Mechanical properties; Neural network; NEURAL-NETWORKS;
D O I：
10.4028/www.scientific.net/MSF.638-642.1488
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
In this paper there are presented results of the optimization of heat treatment conditions, which are temperature and heating time during solution heat treatment or ageing as well the cooling rate after solution treatment for MCMgAl12Zn1, MCMgA19Zn1, MCMgA16Zn1, MCMgA13Zn1 cast magnesium alloys. A casting cycle of alloys has been carried out in an induction crucible furnace using a protective salt bath Flux 12 equipped with two ceramic filters at the melting temperature of 750 +/- 10 degrees C, suitable for the manufactured material. The heat treatment involve the solution heat treatment and cooling in different cooling mediums as well water, air and furnace The improvement of the manufacturing technique and chemical composition as well as of heat treatment and cooling methods leads to the development of a material designing process for the optimal physical and mechanical properties of a new developed alloy
引用
收藏
页码：1488 / 1493
页数：6
相关论文
共 50 条
  • [41] Corrosion-resistant cast magnesium alloys
    Frazier, William E.
    ADVANCED MATERIALS & PROCESSES, 2007, 165 (03): : 24 - 24
  • [42] SUBSTRUCTURE OF CAST ALUMINUM-MAGNESIUM ALLOYS
    ISTOMINK.VV
    ZOLOTORE.VS
    NOVICHKO.II
    PHYSICS OF METALS AND METALLOGRAPHY-USSR, 1971, 32 (02): : 222 - &
  • [43] Corrosion of cast and non equilibrium magnesium alloys
    Mathieu, S
    Hazan, J
    Rapin, C
    Steinmetz, P
    ENVIRONMENTAL DEGRADATION OF MATERIALS AND CORROSION CONTROL IN METALS, 1999, : 69 - 83
  • [44] Modelling of solidification and heat treatment for the prediction of yield stress of cast alloys
    Gandin, Ch.-A.
    Bréchet, Y.
    Rappaz, M.
    Canova, G.
    Ashby, M.
    Shercliff, H.
    Metallurgia Italiana, 2002, 94 (03): : 37 - 39
  • [45] Corrosion-resistant cast magnesium alloys
    Naval Air Systems Command, 47123 Buse Road, Patuxent River, MD 20670-1547, United States
    Adv Mater Processes, 2007, 3 (24):
  • [46] Modelling of solidification and heat treatment for the prediction of yield stress of cast alloys
    Gandin, CA
    Bréchet, Y
    Rappaz, M
    Canova, G
    Ashby, M
    Shercliff, H
    ACTA MATERIALIA, 2002, 50 (05) : 901 - 927
  • [47] INFLUENCE OF HEAT-TREATMENT ON DUCTILITY OF CAST CHROMIUM-ALLOYS
    MINAKOV, VN
    RAKITSKIY, AN
    TREFILOV, VI
    TURTSEVICH, EV
    RUSSIAN METALLURGY, 1975, (06): : 114 - 118
  • [48] Modeling the heat treatment of age-hardenable cast aluminum alloys
    Sisson, Richard D., Jr.
    Ma, Shuhui
    Maniruzzaman, Md.
    SIMULATION OF ALUMINUM SHAPE CASTING PROCESSING: FROM ALLOY DESIGN TO MECHANICAL PROPERTIES, 2006, : 221 - +
  • [49] Optimisation of heat treatment of Al–Cu–(Mg–Ag) cast alloys
    Mohammadreza Zamani
    Stefania Toschi
    Alessandro Morri
    Lorella Ceschini
    Salem Seifeddine
    Journal of Thermal Analysis and Calorimetry, 2020, 139 : 3427 - 3440
  • [50] INVERSE SEGREGATION IN CAST MAGNESIUM ALLOYS - DISCUSSION
    FOX, FA
    ALLEN, NP
    MURPHY, AJ
    CHADWICK, R
    JOURNAL OF THE INSTITUTE OF METALS, 1946, 72 (12): : 693 - &
12345